【51331008】轻合金搅拌摩擦焊接/加工中组织控制与力学行为研究国家自然基金项目

轻合金搅拌摩擦焊接/加工中组织控制与力学行为研究

项目批准号： 51331008

批准年份： 2013

学科分类： E0104.金属结构材料与力学行为

项目负责人：马宗义

资助类别：重点项目

负责人职称：研究员

依托单位：中国科学院金属研究所

资助金额： 300万元

关键词：大塑性变形;搅拌摩擦焊接;搅拌摩擦加工;力学行为;微观组织

起止时间： 2014-01-01到2018-12-31

中英文摘要
结题摘要
结题报告
项目成果
项目参与人

查看更多信息请先登录或注册

序号	标题	类型	作者
1	Influence of welding parameter on mechanical properties and fracture behavior of friction stir welded Al-Mg-Sc joints	期刊论文	Tao Y.;Zhang Z.;Ni D. R.;Wang D.;Xiao B. L.;Ma Z. Y.
2	Tensile properties and strain-hardening behaviour of friction stir welded SiCp/AA2009 composite joints	期刊论文	Ni D. R.;Chen D. L.;Wang D.;Xiao B. L.;Ma Z. Y.
3	Origin of unusual fracture in stirred zone for friction stir welded 2198-T8 Al-Li alloy joints	期刊论文	Tao Y.;Ni D. R.;Xiao B. L.;Ma Z. Y.;Wu W.;Zhang R. X.;Zeng Y. S.
4	锌夹层添加对镁-铝异种金属搅拌摩擦点焊接头组织与性能的影响	期刊论文	徐荣正;刘春忠;倪丁瑞;马宗义
5	一种预测铝合金板材搅拌摩擦焊对接方式中未焊透与弱连接缺陷的方法	专利	倪丁瑞;曾祥浩;马宗义;薛鹏;肖伯律;王东
6	7B04铝合金薄板的搅拌摩擦焊接及接头低温超塑性研究	期刊论文	杨超;王继杰;马宗义;倪丁瑞;付明杰;李晓华;曾元松
7	Enhanced Mechanical Properties of Friction Stir Welded 5083Al-H19 Joints with Additional Water Cooling	期刊论文	Wang B. B.;Chen F. F.;Liu F.;Wang W. G.;Xue P.;Ma Z. Y.
8	包铝层对7B04-O铝合金薄板搅拌摩擦搭接性能影响	期刊论文	杨超;王继杰;韩培培;杜宝瑞;刘晓寒;薛鹏;马宗义;倪丁瑞
9	SiCp/6092Al复合材料搅拌摩擦焊接头的疲劳行为研究	期刊论文	王晨;王贝贝;薛鹏;王东;倪丁瑞;陈礼清;肖伯律;马宗义
10	Achieving superior low-temperature superplasticity for lamellar microstructure in nugget of a friction stir welded Ti-6Al-4V joint	期刊论文	Wu L. H.;Xue P.;Xiao B. L.;Ma Z. Y.
11	Numerical simulations on material flow behaviors in whole process of friction stir welding	期刊论文	Gao E. Z.;Zhang X. X.;Liu C. Z.;Ma Z. Y.
12	Microstructure and mechanical properties of friction stir processed Cu with an ideal ultrafine-grained structure	期刊论文	Xue P.;Wang B. B.;Chen F. F.;Wang W. G.;Xiao B. L.;Ma Z. Y.
13	Effect of Interfacial Microstructure Evolution on Mechanical Properties and Fracture Behavior of Friction Stir-Welded Al-Cu Joints	期刊论文	Xue P.;Xiao B. L.;Ma Z. Y.
14	Intrinsic high cycle fatigue behavior of ultrafine grained pure Cu with stable structure	期刊论文	Xue P.;Huang Z.Y.;Wang B.B.;Tian Y.Z.;Wang W.G.;Xiao B.L.;Ma Z.Y.
15	搅拌摩擦加工超细晶材料的组织和力学性能研究进展	期刊论文	陈菲菲;黄宏军;薛鹏;马宗义
16	Microstructural evolution of aluminum alloy during friction stir welding under different tool rotation rates and cooling conditions	期刊论文	Zeng X. H.;Xue P.;Wu L. H.;Ni D. R.;Xiao B. L.;Wang K. S.;Ma Z. Y.
17	Pinless Friction Stir Spot Welding of Mg-3Al-1Zn Alloy with Zn Interlayer	期刊论文	Xu R. Z.;Ni D. R.;Yang Q.;Liu C. Z.;Ma Z. Y.
18	搅拌摩擦焊接与加工研究进展	期刊论文	薛鹏;张星星;吴利辉;马宗义
19	Influence of water cooling on microstructure and mechanical properties of friction stir welded 2014Al-T6 joints	期刊论文	Zhang Z.;Xiao B. L.;Ma Z. Y.
20	Material flow and void defect formation in friction stir welding of aluminium alloys	期刊论文	Zeng X. H.;Xue P.;Wang D.;Ni D. R.;Xiao B. L.;Wang K. S.;Ma Z. Y.
21	Achieving superior superplasticity from lamellar microstructure of a nugget in a friction-stir-welded Ti-6Al-4V joint	期刊论文	Wu L. H.;Xiao B. L.;Ni D. R.;Ma Z. Y.;Li X. H.;Fu M. J.;Zeng Y. S.
22	Shape Memory Effect, Thermal Expansion and Damping Property of Friction Stir Processed NiTip/Al Composite	期刊论文	Ni D. R.;Wang J. J.;Ma Z. Y.
23	Evolution of local texture and its effect on mechanical properties and fracture behavior of friction stir welded joint of extruded Mg-3A1-1Zn alloy	期刊论文	Shang Q.;Ni D. R.;Xue P.;Xiao B. L.;Ma Z. Y.
24	Non-uniform deformation in a friction stir welded Mg-Al-Zn joint during stress fatigue	期刊论文	Yang J.;Ni D. R.;Xiao B. L.;Ma Z. Y.
25	Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties	期刊论文	Ma Z. Y.;Feng A. H.;Chen D. L.;Shen J.
26	Microstructural evolution of the thermomechanically affected zone in a Ti-6Al-4V friction stir welded joint	期刊论文	Wu L. H.;Wang D.;Xiao B. L.;Ma Z. Y.
27	固溶处理对7B04-O铝合金搅拌摩擦焊接接头微观组织与力学性能的影响	期刊论文	韩培培;杨超;王继杰;杜宝瑞;刘晓寒;薛鹏;马宗义;倪丁瑞
28	Friction stir welding of as-extruded Mg-Al-Zn alloy with higher Al content. Part II: Influence of precipitates	期刊论文	Yang J.;Ni D. R.;Wang D.;Xiao B. L.;Ma Z. Y.
29	Effect of Carbon Nanotube Orientation on Mechanical Properties and Thermal Expansion Coefficient of Carbon Nanotube-Reinforced Aluminum Matrix Composites	期刊论文	Liu Z. Y.;Xiao B. L.;Wang W. G.;Ma Z. Y.
30	Improving joint performance of friction stir welded wrought Mg alloy by controlling non-uniform deformation behavior	期刊论文	Shang Q.;Ni D. R.;Xue P.;Xiao B. L.;Ma Z. Y.
31	Analysis of carbon nanotube shortening and composite strengthening in carbon nanotube/aluminum composites fabricated by multi-pass friction stir processing	期刊论文	Liu Z. Y.;Xiao B. L.;Wang W. G.;Ma Z. Y.
32	Achieving superior low temperature and high strain rate superplasticity in submerged friction stir welded Ti-6Al-4V alloy	期刊论文	Wu L. H.;Zhang H.;Zeng X. H.;Xue P.;Xiao B. L.;Ma Z. Y.
33	Influence of Zn interlayer addition on microstructure and mechanical properties of friction stir welded AZ31 Mg alloy	期刊论文	Xu R. Z.;Ni D. R.;Yang Q.;Liu C. Z.;Ma Z. Y.
34	High-speed friction stir welding of SiCp/Al-Mg-Si-Cu composite	期刊论文	Wang C.;Wang B. B.;Wang D.;Xue P.;Wang Q. Z.;Xiao B. L.;Chen L. Q.;Ma Z. Y.
35	Realising equal strength welding to parent metal in precipitation-hardened Al-Mg-Si alloy via low heat input friction stir welding	期刊论文	Zeng X. H.;Xue P.;Wang D.;Ni D. R.;Xiao B. L.;Ma Z. Y.
36	铝-钢异种金属搅拌摩擦焊研究现状及展望	期刊论文	相倩;吕念春;薛鹏;马宗义
37	一种实现钛合金焊接接头高超塑性性能的加工方法	专利	吴利辉;马宗义;肖伯律;薛鹏;倪丁瑞
38	Fabrication and mechanical properties of bulk NiTip/Al composites prepared by friction stir processing	期刊论文	Ni D. R.;Wang J. J.;Zhou Z. N.;Ma Z. Y.
39	搅拌摩擦加工超细晶及纳米结构Cu-Al合金的微观组织和力学性能研究	期刊论文	薛鹏;肖伯律;马宗义
40	A comparative research on bobbin tool and conventional friction stir welding of Al-Mg-Si alloy plates	期刊论文	Yang C.;Ni D. R.;Xue P.;Xiao B. L.;Wang W.;Wang K. S.;Ma Z. Y.
41	Enhanced mechanical properties of Al36Si composite via friction stir processing and subsequent heat treatment	期刊论文	Wang C.;Wang B. B.;Wang Q. Z.;Chen L. Q.;Xue P.;Xiao B. L.;Ma Z. Y.
42	一种制备高强高导铝合金的塑性变形加工方法	专利	薛鹏;曾祥浩;倪丁瑞;马宗义;肖伯律;王东
43	Hardness recovery mechanism in the heat-affected zone during long-term natural aging and its influence on the mechanical properties and fracture behavior of friction stir welded 2024Al-T351 joints	期刊论文	Zhang Z.;Xiao B. L.;Ma Z. Y.
44	Friction stir welding of as-extruded Mg-Al-Zn alloy with higher Al content. Part I: Formation of banded and line structures	期刊论文	Yang J.;Ni D. R.;Wang D.;Xiao B. L.;Ma Z. Y.
45	Fabrication of high-quality Ti joint with ultrafine grains using submerged friction stirring technology and its microstructural evolution mechanism	期刊论文	Wu L. H.;Hu X. B.;Zhang X. X.;Li Y. Z.;Ma Z. Y.;Ma X. L.;Xiao B. L.
46	Enhancing mechanical properties of friction stir welded 2219Al-T6 joints at high welding speed through water cooling and post-welding artificial ageing	期刊论文	Zhang Z.;Xiao B. L.;Ma Z. Y.
47	Effects of heating rates on microstructure and superplastic behavior of friction stir processed 7075 aluminum alloy	期刊论文	Wang K.;Liu F. C.;Xue P.;Xiao B. L.;Ma Z. Y.
48	Achieving ultrafine-grained structure in a pure nickel by friction stir processing with additional cooling	期刊论文	Xue P.;Xiao B. L.;Ma Z. Y.
49	中国颗粒学会科技进步奖	奖励	马宗义;肖伯律;王东;王全兆;张星星;刘振宇;倪丁瑞;薛鹏;吴利辉
50	Shape Memory Alloy-Reinforced Metal-Matrix Composites: A Review	期刊论文	Ni D. R.;Ma Z. Y.
51	Low-temperature superplasticity of nugget zone of friction stir welded Al-Mg alloy joint	期刊论文	Luo T.;Ni D. R.;Xue P.;Li Y. Z.;Xiao B. L.;Ma Z. Y.;Fu M. J.;Li X. H.;Zeng Y. S.
52	Strain-Controlled Low-Cycle Fatigue Behavior of Friction Stir-Welded AZ31 Magnesium Alloy	期刊论文	Yang J.;Ni D. R.;Wang D.;Xiao B. L.;Ma Z. Y.
53	Enhanced mechanical properties of medium carbon steel casting via friction stir processing and subsequent annealing	期刊论文	Xue P.;Li W. D.;Wang D.;Wang W. G.;Xiao B. L.;Ma Z. Y.
54	Effects of Processing Parameters on the Microstructures and Mechanical Properties of In Situ (Al3Ti + Al2O3)/Al Composites Fabricated by Hot Pressing and Subsequent Friction-Stir Processing	期刊论文	Zhang Q.;Xiao B. L.;Wang Q. Z.;Ma Z. Y.
55	军队科学技术进步奖	奖励	倪丁瑞
56	An approach to enhancement of Mg alloy joint performance by additional pass of friction stir processing	期刊论文	Shang Q.;Ni D.R.;Xue P.;Xiao B.L.;Wang K.S.;Ma Z.Y.
57	Influence of Zn coating on friction stir spot welded magnesium-aluminium joint	期刊论文	Xu R. Z.;Ni D. R.;Yang Q.;Liu C. Z.;Ma Z. Y.
58	Achieving ultrafine-grained ferrite structure in friction stir processed weld metal	期刊论文	Xue P.;Ma Z. Y.;Komizo Y.;Fujii H.
59	Influencing mechanism of Zn interlayer addition on hook defects of friction stir spot welded Mg-Al-Zn alloy joints	期刊论文	Xu R. Z.;Ni D. R.;Yang Q.;Liu C. Z.;Ma Z. Y.
60	Superplastic Constitutive Equation Including Percentage of High-Angle Grain Boundaries as a Microstructural Parameter	期刊论文	Wang K.;Liu F. C.;Xue P.;Wang D.;Xiao B. L.;Ma Z. Y.
61	Tool wear and its effect on microstructure and properties of friction stir processed Ti-6Al-4V	期刊论文	Wu L. H.;Wang D.;Xiao B. L.;Ma Z. Y.
62	Influencing mechanism of Al-containing Zn coating on interfacial microstructure and mechanical properties of friction stir spot welded Mg–steel joint	期刊论文	Xu R. Z.;Ni D. R.;Yang Q.;Xiao B. L.;Liu C. Z.;Ma Z. Y.
63	一种高体分颗粒增强铝基复合材料的焊接方法	专利	倪丁瑞;马宗义;王全兆;肖伯律;王东;薛鹏;张星星;刘振宇
64	镁合金搅拌摩擦焊接的研究现状与展望	期刊论文	马宗义;商乔;倪丁瑞;肖伯律
65	Study on distribution of long-period stacking ordered phase in Mg-Gd-Y-Zn-Zr alloy using friction stir processing	期刊论文	Yang Q.;Xiao B. L.;Wang D.;Zheng M. Y.;Ma Z. Y.
66	A novel approach to achieve high yield strength high nitrogen stainless steel with superior ductility and corrosion resistance	期刊论文	Zhang H.;Xue P.;Wang D.;Wu L. H.;Ni D. R.;Xiao B. L.;Ma Z. Y.
67	一种高结构完整高分散石墨烯/金属复合材料的制备方法	专利	刘振宇;马宗义;肖伯律;倪丁瑞;王全兆;王东;张星星
68	Achieving friction stir welded SiCp/Al-Cu-Mg composite joint of nearly equal strength to base material at high welding speed	期刊论文	Wang D.;Wang Q. Z.;Xiao B. L.;Ma Z. Y.
69	Microstructural evolution and pitting corrosion behavior of friction stir welded joint of high nitrogen stainless steel	期刊论文	Zhang H.;Wang D.;Xue P.;Wu L. H.;Ni D. R.;Ma Z. Y.
70	Effect of Processing Parameters on Plastic Flow and Defect Formation in Friction-Stir-Welded Aluminum Alloy	期刊论文	Zeng X. H.;Xue P.;Wang D.;Ni D. R.;Xiao B. L.;Ma Z. Y.
71	一种铝-镁异种金属薄板对接方法及专用型材结构	专利	倪丁瑞;马宗义;肖伯律;薛鹏
72	Achieving ultra-high strength friction stir welded joints of high nitrogen stainless steel by forced water cooling	期刊论文	Zhang H.;Wang D.;Xue P.;Wu L. H.;Ni D. R.;Xiao B. L.;Ma Z. Y.
73	5083和6061铝合金异种搅拌摩擦焊接接头的组织和性能	期刊论文	王洪亮;曾祥浩;张欣盟;商乔;薛鹏;倪丁瑞;马宗义
74	Superplastic deformation behavior of lamellar microstructure in a hydrogenated friction stir welded Ti-6Al-4V joint	期刊论文	Wu L. H.;Jia C. L.;Han S. C.;Li N.;Ni D. R.;Xiao B. L.;Ma Z. Y.;Fu M. J.;Wang Y. Q.;Zeng Y. S.
75	Effects of Friction Stir Processing Parameters and In Situ Passes on Microstructure and Tensile Properties of Al-Si-Mg Casting	期刊论文	Cui G. R.;Ni D. R.;Ma Z. Y.;Li S. X.
76	Tensile Strength and Electrical Conductivity of Carbon Nanotube Reinforced Aluminum Matrix Composites Fabricated by Powder Metallurgy Combined with Friction Stir Processing	期刊论文	Liu Z. Y.;Xiao B. L.;Wang W. G.;Ma Z. Y.
77	Friction Stir Superplasticity for Unitized Structures	专著	Ma Z. Y.;Mishra R. S.

查看更多信息请先登录或注册

再问科研

相关项目

趋势报告

经验分享