基于增材制造广义波阻抗梯度飞片的斜波加载技术及其应用研究

11972202
2019
A1202.冲击动力学
王永刚
面上项目
教授
宁波大学
62万元
斜波加载;增材制造;广义波阻抗梯度;材料动力学;材料动态加载与变形测量
2020-01-01到2023-12-31
  • 中英文摘要
  • 结题摘要
  • 结题报告
  • 项目成果
  • 项目参与人
查看更多信息请先登录或注册
查看更多信息请先登录或注册
查看更多信息请先登录或注册
重置
序号 标题 类型 作者
1 Investigation into the microstructure and dynamic compressive properties of selective laser melted Ti-6Al-4V alloy with different heating treatments 期刊论文 Liu Yang;Xu Huaizhong;Zhu Lei;Wang Xiaofeng;Han Quanquan;Li Shuxin;Wang Yonggang;Setchi Rossitza;Wang Di
2 Characteristics of the damage evolution and the free surface velocity profile with dynamic tensile spallation 期刊论文 Zhaoxiu Jiang;Zheng Zhong;Puchu Xie;Yonggang Wang;Hongliang He
3 Tensile Mechanical Behavior and Spall Response of a Selective Laser Melted 17-4 PH Stainless Steel 期刊论文 Wang Xiaofeng;Wang Gang;Shi Tongya;Wang Yonggang
4 Effect of heating treatment on the microstructural evolution and dynamic tensile properties of Ti-6Al-4V alloy produced by selective laser melting 期刊论文 Yang Liu;Huaizhong Xu;Binyi Peng;Xiaofeng Wang;Shuxin Li;Qun Wang;Zhiguo Li;Yonggang Wang
5 Strain rate dependence of mechanical property in a selective laser melted 17-4 PH stainless steel with different states 期刊论文 Wang Xiaofeng;Liu Yang;Shi Tongya;Wang Yonggang
6 极端条件下金属拉伸断裂终极阶段的临界损伤特性及相关应力波作用 奖励 陈大年;王永刚;郑宇轩;俞宇颖;周风华
7 Investigation on the spallation properties and failure mechanism of selective laser melted Ti-6Al-4V alloy with heat treatment under shock load 期刊论文 Jinhui Meng;Yang Liu;Zhiguo Li;Zhenyang Jiao;Yonggang Wang
8 Orientation-dependent dynamic shearing properties and underlying failure mechanisms of laser powder bed fusion of CoCrFeNi high-entropy alloy 期刊论文 Lijin Dai;Yang Liu;Shengze Yang;Hongyu Chen;Shuxin Li;Yonggang Wang
9 Hierarchical microstructures and strengthening mechanisms of nano-TiC reinforced CoCrFeMnNi high-entropy alloy composites prepared by laser powder bed fusion 期刊论文 Hongyu Chen;Konrad Kosiba;Tiwen Lu;Ning Yao;Yang Liu;Yonggang Wang;Konda Gokuldoss Prashanth;Challapalli Suryanaray
10 滑轨导向式静/动态双轴拉伸实验技术 期刊论文 刘东升;史同亚;谢普初;陈伟;王永刚
11 Temperature-dependent dynamic compressive properties and failure mechanisms of the additively manufactured CoCrFeMnNi high entropy alloy 期刊论文 Hongyu Chen;Yang Liu;Yonggang Wang;Zhiguo Li;Di Wang;Konrad Kosiba
12 Laser additive manufacturing of nano-TiC particles reinforced CoCrFeMnNi high-entropy alloy matrix composites with high strength and ductility 期刊论文 Hongyu Chen;Tiwen Lu;Yonggang Wang;Yang Liu;Tongya Shi;Konda Gokuldoss Prashanth;Konrad Kosiba
13 Dynamic compressive properties and underlying failure mechanisms of selective laser melted Ti-6Al-4V alloy under high temperature and strain rate conditions 期刊论文 Yang Liu;Jinhui Meng;Lei Zhu;Hongyu Chen;Zhiguo Li;Shuxin Li;Di Wang;Yonggang Wang;Konrad Kosiba
14 Application of ramp-wave loading for spallation tests using a graded generalized impedance flyer 期刊论文 Zhaoxiu Jiang;Jinlin Xu;Jianbo Hu;V.P.W. Shim;Yonggang Wang
15 Damage evolution and spall failure in copper under complex shockwave loading conditions 期刊论文 Xie Puchu;Wang Yonggang;Shi Tongya;Wang Xiaofeng;Hu Changming;Hu Jianbo;Zhang Fengguo
16 Feedstock preparation, microstructures and mechanical properties for laser-based additive manufacturing of steel matrix composites 期刊论文 Hongyu Chen;Konrad Kosiba;C. Suryanarayana;Tiwen Lu;Yang Liu;Yonggang Wang;Konda Gokuldoss Prashanth
17 非一维应变冲击加载下高纯铜初始层裂行为 期刊论文 谢普初;汪小松;胡昌明;胡建波;张凤国;王永刚
18 基于“钉床型”飞片的斜波加载技术及应用 期刊论文 宗泽;王刚;方嘉铖;林茜;王永刚
查看更多信息请先登录或注册

相关项目

趋势报告

经验分享