腹板开孔冷弯型钢构件畸变屈曲及相关屈曲破坏机理与设计方法研究

51868049
2018
E0804.结构工程
姚行友
地区科学基金项目
教授
南昌工程学院
37万元
腹板开孔;相关屈曲;局部屈曲;冷弯型钢构件;畸变屈曲
2019-01-01到2022-12-31
  • 中英文摘要
  • 结题摘要
  • 结题报告
  • 项目成果
  • 项目参与人
查看更多信息请先登录或注册
查看更多信息请先登录或注册
查看更多信息请先登录或注册
重置
序号 标题 类型 作者
1 线性变化压力下矩形孔薄板屈曲性能与有效宽度计算方法 期刊论文 姚行友
2 Buckling Behavior and Effective Width Design Method for Thin Plates with Holes under Stress Gradient 期刊论文 Guo Yanli;Yao Xingyou
3 开孔薄板屈曲性能研究进展 期刊论文 苏坚艺;姚行友;郭彦利;柳亚华;胡翌
4 Analysis on Elastic Buckling of Thin Plate with Slotted Hole in Bending 会议论文 Guo Yanli
5 Experimental Study and Direct Strength Method for Cold-Formed Steel Built-Up I-Sectional Columns under Axial Compression 期刊论文 Yao Xingyou
6 Distortional buckling behavior and design method of cold-formed steel lipped channel with rectangular holes under axial compression 期刊论文 Guo Yanli;Yao Xingyou
7 Overall Buckling Performance of Cold-Formed Steel Axial Compression Lipped Channel Members with Circle Holes 会议论文 Guo Yanli
8 Controlling Measure for Distortional Buckling of Cold-formed Thin-walled Steel Lipped Channel Members 会议论文 Yao Xingyou;Yin Jiawen;Hu Pengwen;Song Xiaoqing;Li Xiao
9 腹板开孔冷弯卷边槽钢轴压构件畸变屈曲分析 期刊论文 姚行友;郭彦利;柳亚华
10 Elastic Buckling of Axially-compressed Thin Plate with Slotted Holes 会议论文 Guo Yanli
11 腹板开孔冷弯薄壁型钢轴压短柱承载力试验与设计方法研究 期刊论文 姚行友
12 腹板开孔冷弯薄壁卷边槽钢受弯构件整体屈曲性能分析 期刊论文 姚行友;程国威;郭彦利;周水;杨嘉宝
13 Elastic Buckling Behavior of Thin Plate with Circle Holes under Axial Compression 会议论文 Xingyou YAO;Xiao Li;Yanli GUO
14 腹板开矩形孔冷弯薄壁型钢卷边槽形截面柱畸变屈曲性能与设计 期刊论文 郭彦利;胡鹏文;姚行友
15 Experimental Study and Effective Width Method for Cold-Formed Steel Lipped Channel Stud Columns with Holes 期刊论文 Yanli Guo;Xingyou Yao
16 Elastic buckling of thin plate with circular holes in Bending 会议论文 Guo Yanli;Song Xiaoqing;Li Xiao;Yao Xingyou;Xia Zhifan
17 Distortional buckling behavior of cold-formed thin-walled steel lipped channel columns with web and flange stiffener thin-walled lipped channel sections with holes 会议论文 Yao Xingyou
18 Experiment and Design Method of Cold-Formed Thin-Walled Steel Double-Lipped Equal-Leg Angle under Axial Compression 期刊论文 Xingyou YAO;Yafei LIU;Shile ZHANG;Yanli Guo
19 受弯开孔薄板弹性屈曲性能分析与计算方法研究 期刊论文 苏坚艺;姚行友;郭彦利;柳亚华;胡翌
20 Experimental Study and Proposal to Improve the EWM Design of Cold-Formed Steel Lipped Channel Columns with Circular Holes under Axial Compression 期刊论文 Xingyou Yao
21 腹板开孔冷弯薄壁卷边槽钢轴压柱试验及设计方法 期刊论文 姚行友;尹佳文;郭彦利
22 非均匀受压圆孔矩形薄板屈曲性能与有效宽度计算方法 期刊论文 姚行友;宋晓庆;郭彦利
23 轴心受压开孔薄板弹性屈曲性能分析 期刊论文 柳亚华;姚行友;苏坚艺;雷东展;肖周华
24 Study on Restoring Force Model of Cold-Formed Thin-Walled Steel Lipped Channel Beam-Columns under Cyclic Load 期刊论文 Xingyou YAO;Jiabao YANG;Yanli GUO
25 冷弯薄壁型钢拼合工字形截面柱畸变屈曲及相关屈曲轴压性能试验与直接强度法研究 期刊论文 姚行友;李潇
26 Distortional buckling critical sectional dimensions and effective length of cold-formed steel lipped channel members 会议论文 Guo Yanli;Hu Pengwen;Li Xiao;Yao Xingyou
27 EWM-based design method for distortional buckling of cold-formed thin-walled lipped channel sections with holes 期刊论文 Xingyou YAO
28 Experimental Investigation and Load Capacity of Slender Cold-Formed Lipped Channel Sections with Holes in Compression 期刊论文 Yao Xingyou
查看更多信息请先登录或注册

相关项目

趋势报告

经验分享