| 1 |
国际先进材料协会IAAM Award
|
奖励 |
Q.Y. Wang |
| 2 |
Effect of rolling on crack behavior of FeCrAl alloys in ultra-long life
|
期刊论文 |
Min Zhan;Yajun Dai;Chang Liu;Xiangyu Wang;Lang Li;Yongjie Liu;Chao He;Qingyuan Wang |
| 3 |
Effect of microstructure on slip-induced crack initiation and early propagation of martensitic steel during high cycle fatigue
|
期刊论文 |
Yajun Dai;Shijian Wang;Qiyuan He;Chang Liu;Xiangyu Wang;Xue Li;Lang Li;Yongjie Liu;Chao He;Qingyuan Wang |
| 4 |
Very long life fatigue failure mechanism of electron beam welded joint for titanium alloy at elevated temperature
|
期刊论文 |
Liu Fulin;Chen Yao;He Chao;Wang Chong;Li Lang;Liu Yongjie;Wang Qingyuan |
| 5 |
A machine learning study on the fatigue crack path of short crack on an α titanium alloy
|
期刊论文 |
Zhengyu Shen;Guanlin Lv;Daixin Fu;Yihao Long;Zhouyu Zhang;Kai Tan;Lang Li;Qingyuan Wang;Chong Wang |
| 6 |
Tensile properties, strain rate sensitivity and failure mechanism of single crystal superalloys CMSX-4
|
期刊论文 |
Hong Zhang;Peidong Li;Xiufang Gong;Tianjian Wang;Lang Li;Yongjie Liu;Qingyuan Wang |
| 7 |
In-Situ Thermography Investigation of Crack Growth in Armco Iron under Gigacycle Fatigue Loading
|
期刊论文 |
Victor Postel;Johann Petit;Chong Wang;Kai Tan;Isabelle Ranc-Darbord;Qingyuan Wang;Daniele Wagner |
| 8 |
基于先进光源原位成像的超高周疲劳损伤试验系统
|
专利 |
吴圣川;吴正凯;鲍泓翊玺;谢成;胡雅楠;刘宇杰;康国政;王清远;何超;付亚楠;肖体乔;李可;钱桂安;洪友士;袁清习 |
| 9 |
Enhancing the mechanical properties of electron beam welded TC17 titanium alloy joint by post-weld heat treatment
|
期刊论文 |
Hanqing Liu;Haomin Wang;Zhen Zhang;Zhiyong Huang;Yongjie Liu;Qingyuan Wang;Qiang Chen |
| 10 |
复杂环境载荷下超长寿命疲劳加速测试关键技术与装备研发
|
奖励 |
王清远;何超;张宏;刘永杰;王志宇;王宠 |
| 11 |
Creep-fatigue voids and sub-grain boundaries assisted crack initiation for titanium alloy in VHCF regime with high mean stress at 400°C
|
期刊论文 |
Fulin Liu;Yao Chen;Chao He;Yongjie Liu;Chong Wang;Qingyuan Wang;Lang Li |
| 12 |
Development of a photomicroscope method for in situ damage monitoring under ultrasonic fatigue test
|
期刊论文 |
Kai Tan;Victor Postel;Yujia Liu;Dongtong Yang;Sen Tang;Chong Wang;Qingyuan Wang |
| 13 |
Effect of temperature on tensile behavior, fracture morphology, and deformation mechanisms of Nickel-based additive manufacturing 939 superalloy
|
期刊论文 |
Tongfei Zou;Meng Liu;Yifan Cai;Quanyi Wang;Yunqing Jiang;Yunru Wang;Zhenheng Gao;Yubing Pei;Hong Zhang;Yongjie Liu;Qingyuan Wang |
| 14 |
Bismuth titanate based piezoceramics: Structural evolutions and electrical behaviors at different sintering temperatures
|
期刊论文 |
Xu Qian;Xie Shaoxiong;Wang Fei;Liu Jiayi;Shi Jikai;Xing Jie;Chen Qiang;Zhu Jianguo;Wang Qingyuan |
| 15 |
Dependence on temperature of compression behavior and deformation mechanisms of nickel-based single crystal CMSX-4
|
期刊论文 |
Zhang Hong;Wang Quanyi;Gong Xiufang;Wang Tianjian;Zhang Wei;Chen Ke;Wang Chong;Liu Yongjie;Wang Qingyuan |
| 16 |
一种基于机器学习的材料抗疲劳优化设计方法
|
专利 |
张宏;王清远;刘永杰;王宠;何超;李浪 |
| 17 |
Crack initiation and short crack propagation of friction stir welded TC17 alloy joint
|
期刊论文 |
Jun Song;Hanqing Liu;Jie Cui;Yongjie Liu;Lang Li;Yao Chen;Qingyuan Wang;Qiang Chen |
| 18 |
Mechanical properties and energy absorption of 3D printed double-layered helix honeycomb under in-plane compression
|
期刊论文 |
Ping Xia;Qiancheng Liu;Hua Fu;Yaping Yu;Lijuan Wang;Qingyuan Wang;Xue Yu;Feng Zhao |
| 19 |
Deformation nanotwins in a single-crystal Ni-based superalloy at room temperature and low strain rate
|
期刊论文 |
Hong Zhang;Yubing Pei;Xiufang Gong;Xiaohui Chen;Wei Zhang;Peng Zhang;Lang Li;Yongjie Liu;Qingyuan Wang |
| 20 |
基于固有频率的超声疲劳裂纹扩展速率测量方法
|
专利 |
何超;王清远;刘永杰;李雪;李浪;张宏;王宠 |
| 21 |
复杂荷载与环境下超长寿命疲劳测试技术及工程应用
|
奖励 |
王清远;刘永杰;王宠 |
| 22 |
Small fatigue crack growth in an extruded dual-phase Mg-Li alloy
|
期刊论文 |
Xiangyu WANG;Chao HE;Yajun DAI;Chang LIU;Min ZHAN;Xue LI;Yongjie LIU;Qingyuan WANG |
| 23 |
Deterioration of ambient-cured and heat-cured fly ash geopolymer concrete by high temperature exposure and prediction of its residual compressive strength
|
期刊论文 |
Zhang Hongen;Li Lang;Yuan Cheng;Wang Qingyuan;Sarker Prabir Kumar;Shi Xiaoshuang |
| 24 |
Nanoprecipitates assisting subsurface cracking in high-strength steel under very high cycle fatigue
|
期刊论文 |
Yao Chen;Shijian Wang;Haizhou Li;Yongjie Liu;Chao He;Jie Cui;Qing Jiang;Chang Liu;Qiyuan He;Quanwei Liang;Lang Li;Qingyuan Wang |
| 25 |
Crack initiation mechanism of titanium alloy in very high cycle fatigue regime at 400℃ considering stress ratio effect
|
期刊论文 |
Fulin Liu;Haotian Peng;Yongjie Liu;Chong Wang;Qingyuan Wang;Yao Chen |
| 26 |
A Novel Model of Ultrasonic Fatigue Test in Pure Bending
|
期刊论文 |
Dongtong Yang;Sen Tang;Yongtao Hu;Alexander Nikitin;Qingyuan Wang;Yongjie Liu;Lang Li;Chao He;Yan Li;Bo Xu;Chong Wang |
| 27 |
Effect of long-period stacking ordered structure on very high cycle fatigue properties of Mg-Gd-Y-Zn-Zr alloys
|
期刊论文 |
Xiangyu WANG;Chao HE;Xue Li;Lang LI;Yongjie LIU;Qingyuan WANG |
| 28 |
Three-dimensional domain patterns in tetragonal-to-monoclinic Bi4Ti3O12 ceramics: Nonlinear analysis and piezoresponse force microscopy imaging
|
期刊论文 |
Xie Shaoxiong;Chen Yu;Liu Wenyuan;Xia Guozhan;Huang Boyuan;Liu Cong;Wang Qingyuan;Li Jiangyu |
| 29 |
A Phase-Field Framework for Brittle Fracture in Quasi-Crystals
|
期刊论文 |
Peidong Li;Weidong Li;Haidong Fan;Qingyuan Wang;Kun Zhou |
| 30 |
针对单晶材料热-机疲劳本构模型的损伤计算方法
|
专利 |
张宏;王清远;刘永杰;王宠;何超;李浪 |
| 31 |
Very high cycle fatigue behavior of laser powder bed fusion additively manufactured Ti6Al4V alloy at elevated temperature
|
期刊论文 |
Haotian Peng;Fulin Liu;Yao Chen;Chao He;Lang Li;Hong Zhang;Chong Wang;Qingyuan Wang;Yongjie Liu |
| 32 |
基于Abaqus平台疲劳损伤与寿命评估方法
|
专利 |
张宏;王清远;刘永杰;王宠;李浪 |
| 33 |
波形钢腹板组合梁抗疲劳关键技术及应用
|
奖励 |
王清远;王志宇;陈宜言;姜瑞娟;盖卫明;吴启明;刘永杰;石宵爽;董桔灿;何超 |
| 34 |
Tensile behavior, microstructural evolution, and deformation mechanisms of a high Nb-TiAl alloy additively manufactured by electron beam melting
|
期刊论文 |
Hong Zhang;Dong Lu;Yubing Pei;Tan Chen;Tongfei Zou;Tianjian Wang;Xiaoyan Wang;Yongjie Liu;Qingyuan Wang |
| 35 |
Cyclic responses and microstructure sensitivity of Cr-based turbine steel under different strain ratios in low cycle fatigue regime
|
期刊论文 |
Xiufang Gong;Tianjian Wang;Qingsong Li;Yongjie Liu;Hong Zhang;Wei Zhang;Quanyi Wang;Qingyuan Wang |
| 36 |
Tensile and very high cycle fatigue behaviors of a compressor blade titanium alloy at room and high temperatures
|
期刊论文 |
Liu Fulin;Chen Yao;He Chao;Li Lang;Wang Chong;Li Haizhou;Zhang Hong;Wang Qingyuan;Liu Yongjie |
| 37 |
Strength degradation of a ferrite-bainite weathering steel subjected to corrosion fatigue environment
|
期刊论文 |
Du Yaohan;Hanqing Liu;Yongjie Liu;Jun Song;Kai Tan;Lang Li;Chong Wang;Ying Yang;Qingyuan Wang |
| 38 |
Enhanced extra-long life fatigue resistance of a bimodal titanium alloy by laser shock peening
|
期刊论文 |
Yang Kun;Huang Qi;Zhong Bin;Wang Qingyuan;Chen Qiang;Chen Yao;Su Ning;Liu Hanqing |
| 39 |
In Situ Non‐Topotactic Reconstruction‐Induced Synergistic Active Centers for Polysulfide Cascade Catalysis
|
期刊论文 |
Pan Zeng;Hao Zou;Chen Cheng;Lei Wang;Cheng Yuan;Genlin Liu;Jing Mao;Ting‐Shan Chan;Qingyuan Wang;Liang Zhang |
| 40 |
天府万人计划天府杰出科学家
|
奖励 |
王清远 |
| 41 |
Development of biomedical Ti-Nb-Zr-Mn alloys with enhanced mechanical properties and corrosion resistance
|
期刊论文 |
Jiang Wu;Xiao Tan;Xuguang An;Jing Zhang;Yi Guo;Jia Liu;Yuanqi Luo;Weitang Yao;Qingquan Kong;Qingyuan Wang |
| 42 |
Vacuum retarding and air accelerating effect on the high-cycle andvery-high-cycle fatigue behavior of a ZK60 magnesium alloy
|
期刊论文 |
Yongjie Liu;Yao Chen;Chao He;Fulin Liu;Kun Yang;Lang Li;Hong Zhang;Chong Wang;Qingyuan Wang |
| 43 |
Effect of texture and banded structure on the crack initiation mechanism of a friction stir welded magnesium alloy joint in very high cycle fatigue regime
|
期刊论文 |
Chen Yao;Zhang Ruofan;He Chao;Liu Fulin;Yang Kun;Wang Chong;Wang Qingyuan;Liu Yongjie |
| 44 |
The high cycle fatigue behavior, failure characteristics, and fatigue life empirical relationship of 9% Cr steel under different stress ratios at 630 ℃
|
期刊论文 |
Quanyi Wang;Meng Liu;Yifan Cai;Tianjian Wang;Yubing Pei;Hong Zhang;Yongjie Liu;Qingyuan Wang |
| 45 |
Effects of microstructure on crack initiation in super martensitic stainless steel under very‐high‐cycle fatigue at elevated temperature
|
期刊论文 |
Xue Li;Chao He;Xiangyu Wang;Yao Chen;Chong Wang;Hong Zhang;Lang Li;Yongjie Liu;Qingyuan Wang |
| 46 |
Effects of local microstructure on crack initiation in super martensitic stainless steel under very-high-cycle fatigue
|
期刊论文 |
Xue LI;Yajun DAI;Xiangyu WANG;Yongjie LIU;Yao CHEN;Chong WANG;Hong ZHANG;Lang LI;Hanqing LIU;Chao HE;Qingyuan WANG |
| 47 |
Comparisons of low cycle fatigue response, damage mechanism, and life prediction of MarBN steel under stress and strain-controlled modes
|
期刊论文 |
Hong Zhang;Quanyi Wang;Xiufang Gong;Tianjian Wang;Yubing Pei;Wei Zhang;Yongjie Liu;Chong Wang;Qingyuan Wang |
| 48 |
Thermodynamic Investigation with Synergetic Method on Inner Crack Growth Behavior at Very High Cycle Fatigue Regime
|
期刊论文 |
Yujia Liu;Bo Xu;Sen Tang;Lang Li;Chao He;Chong Wang;Qingyuan Wang |
| 49 |
Fatigue-induced HCP-to-FCC phase transformation assisting crack nucleation of pure zirconium in high cycle fatigue regime
|
期刊论文 |
Qing Jiang;Yao Chen;Qi Shuai;Fulin Liu;Lang Li;Chao He;Hong Zhang;Chong Wang;Yongjie Liu;Qingyuan Wang |
| 50 |
可调式纵-扭复合振动的超声疲劳试验变幅杆及试验方法
|
专利 |
朱振宇;陈茂林;张俊良;葛枫;王清远 |
| 51 |
A review on the recovery of fire-damaged concrete with post-fire-curing
|
期刊论文 |
Lang Li;Long Shi;Qingyuan Wang;Yongjie Liu;Jiangfeng Dong;Hong Zhang;Lihai Zhang |
| 52 |
Low cycle fatigue properties, damage mechanism, life prediction and microstructure of MarBN steel: Influence of temperature
|
期刊论文 |
Zhang Xiaodong;Wang Tianjian;Gong Xiufang;Li Qingsong;Liu Yongjie;Wang Quanyi;Zhang Hong;Wang Qingyuan |
| 53 |
2014~2022连续九年Elsevior中国高被引学者(Chinese Most Cited Researchers)
|
奖励 |
王清远 |
| 54 |
A comparative study of low cycle fatigue behavior and microstructure of Cr-based steel at room and high temperatures
|
期刊论文 |
Wang Quanyi;Wang Qingyuan;Gong Xiufang;Wang Tianjian;Zhang Wei;Li Lang;Liu Yongjie;He Chao;Wang Chong;Zhang Hong |
| 55 |
Effect of high temperature on crack initiation of super austenitic stainless steel 654SMO in very high cycle fatigue
|
期刊论文 |
Li Xue;Zhang Ruofan;Wang Xiangyu;Liu Yongjie;Wang Chong;Zhang Hong;Li Lang;He Chao;Wang Qingyuan |
| 56 |
Effect of microstructure on the fatigue crack growth behavior of 9%Cr martensitic steel at different stress ratios under 630 ℃
|
期刊论文 |
Quanyi Wang;Fei Yang;Tongfei Zou;Meng Liu;Yunqing Jiang;Yubing Pei;Hong Zhang;Yongjie Liu;Qingyuan Wang |
| 57 |
Competing crack initiation behaviors of a laser additively manufactured nickel-based superalloy in high and very high cycle fatigue regimes
|
期刊论文 |
Yang Kun;Huang Qi;Wang Qingyuan;Chen Qiang |
| 58 |
Thermal shock resistance and crack growth behavior of Aurivillius phase Bi_4Ti_3O_(12)-based ferroelectric ceramics
|
期刊论文 |
Xu Qian;Xie Shaoxiong;Chen Yu;Wang Qingyuan |
| 59 |
基于晶体塑性的疲劳裂纹萌生与扩展的损伤寿命评估方法
|
专利 |
张宏;张玮;王林森;王清远;刘永杰;李浪;何超;王宠 |
| 60 |
一种统一试样尺寸的超声疲劳应力放大装置
|
专利 |
何超;王清远;王宠;刘永杰;李雪;李浪;张宏 |
| 61 |
2013-2023 MRL OUTSTANDING PAPER AWARD
|
奖励 |
Huang C.X.;Hu W.P.;Wang Q.Y.;Wang C.;Yang G.;Zhu Y.T. |
| 62 |
Comparative study of very high cycle tensile and torsional fatigue in TC17 titanium alloy
|
期刊论文 |
Liu Hanqing;Wang Haomin;Huang Zhiyong;Wang Qingyuan;Chen Qiang |
| 63 |
Effects of defects on tensile and fatigue behaviors of selective laser melted titanium alloy in very high cycle regime
|
期刊论文 |
Liu Fulin;He Chao;Chen Yao;Zhang Hong;Wang Qingyuan;Liu Yongjie |
| 64 |
Heterogeneous microstructure and associated mechanical properties of thick electron beam welded Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy joint
|
期刊论文 |
Hanqing Liu;Jun Song;Haomin Wang;Yaohan Du;Kun Yang;Yongjie Liu;Qingyuan Wang;Qiang Chen |
| 65 |
Machine learning-based prediction of fracture toughness and path in the presence of micro-defects
|
期刊论文 |
Xiaotao Li;Xu Zhang;Wei Feng;Qingyuan Wang |
| 66 |
Slip-driven and weld pore assisted fatigue crack nucleation in electron beam welded TC17 titanium alloy joint
|
期刊论文 |
Hanqing Liu;Jun Song;Haomin Wang;Chuanli Yu;Yaohan Du;Chao He;Qingyuan Wang;Qiang Chen |
| 67 |
Influence of the volume content of α + β colonies on the very high cycle fatigue behavior of a titanium alloy
|
期刊论文 |
Kun Yang;Qi Huang;Bin Zhong;Yong Jie Liu;Chao He;Hanqing Liu;Ning Su;Qingyuan Wang;Qiang Chen |
| 68 |
Dependence on Manufacturing Directions of Tensile Behavior and Microstructure Evolution of Selective Laser Melting Manufactured Inconel 625
|
期刊论文 |
Meng Liu;Quanyi Wang;Yifan Cai;Dong Lu;Yubing Pei;Hong Zhang;Yongjie Liu;Qingyuan Wang |
| 69 |
In Situ Reconstruction of Electrocatalysts for Lithium–Sulfur Batteries: Progress and Prospects
|
期刊论文 |
Pan Zeng;Bin Su;Xiaolian Wang;Xiaoqin Li;Cheng Yuan;Genlin Liu;Kehua Dai;Jing Mao;Dongliang Chao;Qingyuan Wang;Liang Zhang |
| 70 |
一种三相组织钛合金及其制备方法
|
专利 |
张靖;孔清泉;徐希伟;安旭光;冯威;姚卫棠;王清远;雷少峰;马震钰;郭溢 |
| 71 |
Localized dislocation interactions within slip bands and crack initiation in Mg-10Gd-3Y-0.3Zr alloy
|
期刊论文 |
He Chao;Li Xue;Liu Yongjie;Wang Chong;Zhang Hong;Li Lang;Wang Qingyuan;Shao Xiaohong;Chen Qiang |
| 72 |
Tensile and Fatigue Behavior of Electron Beam Welded TC17 Titanium Alloy Joint
|
期刊论文 |
Hanqing Liu;Haomin Wang;Zhen Zhang;Yongjie Liu;Zhiyong Huang;Qingyuan Wang;Qiang Chen |
| 73 |
微观-宏观尺度钣金成形工艺模型的损伤与疲劳寿命评估方法
|
专利 |
张宏;王清远;刘永杰;王宠;李浪 |
| 74 |
一种十字对称超声共振弯曲加速疲劳实验装置
|
专利 |
王宠;阳东彤;王清远;唐森;李浪;刘永杰 |
| 75 |
Adhesive Contact of a One-Dimensional Hexagonal Quasicrystal Half-Space Punched by a Spherical Indenter
|
期刊论文 |
Peidong Li;Yuwei Liu;Songhan Zhang;Bingmei Shao;Haidong Fan;Qingyuan Wang |
| 76 |
Cyclic plastic deformation mechanism and cyclic hardening model of Sanicro 25 steel welded joint
|
期刊论文 |
Li Haizhou;Chen Jintao;Chen Hui;Xu Lianyong;Wang Qingyuan |
| 77 |
Effect of basal texture on small crack behavior of magnesium alloy in very high cycle fatigue regime
|
期刊论文 |
Chang Liu;Yajun Dai;Xiangyu Wang;Yao Chen;Lang Li;Yongjie Liu;Qingyuan Wang;Chao He |
| 78 |
Microscopic and macroscopic analyses of the interaction mechanism between defect growth and dislocation emission in single-crystal aluminum
|
期刊论文 |
Li Xiaotao;Peng Shenyou;Zhang Xu;Jiang Xiaoyu;Wang Qingyuan |
| 79 |
Crack initiation and propagation characteristics of a dual‐phase Mg–Li alloy under high‐cycle and very‐high‐cycle fatigue regimes
|
期刊论文 |
Xiangyu Wang;Chao He;Xue Li;Yongjie Liu;Qingyuan Wang;Lang Li;Hong Zhang;Chong Wang |
| 80 |
METHOD FOR ASSESSING FATIGUEDAMAGE AND A FATIGUE LIFE BASED ONA CRYSTAL PLASTIC WELDING PROCESSMODEL
|
专利 |
Qingyuan Wang;Hong Zhang;Yongjie Liu;Chong Wang;Lang Li;Chao He |
| 81 |
Fatigue mechanisms of wheel rim steel under off-axis loading
|
期刊论文 |
Zhenyu Zhu;Yilin Zhu;Qingyuan Wang |
| 82 |
Recovery of mortar-aggregate interface of fire-damaged concrete after post-fire curing
|
期刊论文 |
Lang Li;Hong Zhang;Jiangfeng Dong;Hongen Zhang;Pu Jia;Qingyuan Wang;Yongjie Liu |
| 83 |
一种生物医用纯β相钛合金及其制备方法
|
专利 |
孔清泉;安旭光;张靖;郭溢;冯威;姚卫棠;王清远;黄林;雷少峰;徐希伟;马震钰 |
| 84 |
基于晶体塑性焊接工艺模型的损伤与疲劳寿命评估方法
|
专利 |
张宏;王清远;刘永杰;王宠;李浪 |
| 85 |
Effect of ultrasonic peening treatment on the fatigue behaviors of a magnesium alloy up to very high cycle regime
|
期刊论文 |
Yao Chen;Fulin Liu;Chao He;Lang Li;Chong Wang;Yongjie Liu;Qingyuan Wang |
| 86 |
Mechanical behaviors of electron beam welded titanium alloy up to very high cycle fatigue under different process conditions
|
期刊论文 |
Liu Yongjie;Liu Fulin;He Ruixiang;Wang Qingyuan;Wang Chong;He Chao;Kashif Khan Muhammad;Chen Yao |
| 87 |
Bending Fatigue Behavior of 316L Stainless Steel up to Very High Cycle Fatigue Regime
|
期刊论文 |
Yongtao Hu;Yao Chen;Chao He;Yongjie Liu;Qingyuan Wang;Chong Wang |
| 88 |
Fatigue-induced oxidation assisting microcrack nucleation in Mg-RE alloy under ultrasonic fatigue
|
期刊论文 |
Yao Chen;Qi Shuai;Yujuan Wu;Liming Peng;Xiaohong Shao;Fulin Liu;Chao He;Lang Li;Yongjie Liu;Qingyuan Wang;Shaoxiong Xie;Qiang Chen |
| 89 |
Phase-field modeling of hydro-thermally induced fracture in thermo-poroelastic media
|
期刊论文 |
Li Peidong;Li Dingyu;Wang Qingyuan;Zhou Kun |
| 90 |
Effect of microstructure inhomogeneity and crack initiation environment on the very high cycle fatigue behavior of a magnesium alloy
|
期刊论文 |
Yao Chen;Chao He;Fulin Liu;Chong Wang;Qing Xie;Qingyuan Wang;Yongjie Liu |
| 91 |
The cyclic response behavior, failure mechanism, and life prediction model of 9% Cr‐based steel under different strain ratios in the low cyclic fatigue regime at 430°C
|
期刊论文 |
Quanyi Wang;Yifan Cai;Meng Liu;Qingsong Li;Yubing Pei;Hong Zhang;Yongjie Liu;Qingyuan Wang |
| 92 |
Inhomogeneity of microstructure in friction stir welded TC17 alloy joint and its effects on mechanical behavior
|
期刊论文 |
Song Jun;Liu Hanqing;Tan Kai;Liu Yongjie;Du Yaohan;Wang Chong;He Chao;Wang Qingyuan |
| 93 |
一种考虑缺陷随机特征的概率疲劳强度评估方法
|
专利 |
朱顺鹏;牛晓鹏;王清远;靳吉庆;罗昌齐;何金超;孟德彪 |
| 94 |
超声共振多轴拉压疲劳实验装置
|
专利 |
王宠;汪歆彧;唐森;白晓明;李一磊;刘永杰;王清远 |
| 95 |
一种低周疲劳测试数据处理与内应力评估方法
|
专利 |
张宏;张玮;王林森;王清远;刘永杰;李浪;何超;王宠 |
| 96 |
一种金属材料表面处理喷砂机
|
专利 |
苏振华;刘晓阳;姜文煌;王清远;冯威;郑建能;王少江;邓嫄媛;孔清泉;朱晓东;安旭光;孙艳;杨旭林;吴小强;黄林;张瑞;罗建军;傅朝坤;高林 |
| 97 |
科学中国人年度人物创新团队奖
|
奖励 |
王清远 |
| 98 |
Influence of Welded Pores on Very Long-Life Fatigue Failure of the Electron Beam Welding Joint of TC17 Titanium Alloy
|
期刊论文 |
Fulin Liu;Hong Zhang;Hanqing Liu;Yao Chen;Muhammad Kashif Khan;Qingyuan Wang;Yongjie Liu |
| 99 |
Effect of temperature on tensile behavior, fracture morphology and deformation mechanisms of Nickel-based single crystal CMSX-4
|
期刊论文 |
Tianjian Wang;Hong Zhang;Chunhua Liu;Xiufang Gong;Yubing Pei;Yu Zou;Yongjie Liu;Qingyuan Wang |
| 100 |
Effects of metallic microstructures on fatigue fracture of Q345 steel
|
期刊论文 |
Hanqing Liu;Chun-ming Wang;Hong Zhang;Zhiyong Huang;Qingyuan Wang;Qiang Chen |
| 101 |
Determination of the crack initiation stress, elastic modulus and ultimate crack length in TPBT concrete beams based on shear deformation theory
|
期刊论文 |
Pu Jia;Qingyuan Wang |
| 102 |
Cyclic Deformation and Fatigue Failure Mechanisms of Thermoplastic Polyurethane in High Cycle Fatigue
|
期刊论文 |
Shuo Wang;Sen Tang;Chao He;Qingyuan Wang |
| 103 |
A novel dynamic extrusion for microstructure tailoring and evading strength-ductility trade-off in AZ31 magnesium alloy
|
期刊论文 |
Zhao Feng;Xie Jinhong;Zhu Yikun;Liu Qiancheng;Ye Tian;Chen Lianyang;Suo Tao;Wang Kaixuan;Wang Tao;Wang Qingyuan |
| 104 |
一种超声共振多轴弯曲疲劳实验装置
|
专利 |
王宠;邓海鳞;王清远;刘永杰;黄志勇;范海冬 |
