再问科研
基金查询
学科分析
选题分析
AI润色(Beta)
新闻公告
趋势报告
经验分享
登录
注册
李落星
联合基金项目
项目编号:
U1664252 【年份:2016】
项目名称:
车身用铝合金结构件设计、工艺、性能调控及应用基础
资助金额:
234万
单位名称:
湖南大学
学科分类:
E0508.成形制造
参与者:
湖南大学
车身用铝合金结构件设计、工艺、性能调控及应用基础
项目批准号:
U1664252
批准年份:
2016
学科分类:
E0508.成形制造
项目负责人:
李落星
资助类别:
联合基金项目
负责人职称:
教授
依托单位:
湖南大学
资助金额:
234万元
关键词:
挤压-弯曲;工艺优化;应用验证;铝合金车身结构件;组织演变
起止时间:
2017-01-01到2020-12-31
中英文摘要
结题摘要
结题报告
项目成果
项目参与人
查看更多信息请先登录或注册
查看更多信息请先登录或注册
查看更多信息请先登录或注册
标题
类型
全部
期刊论文
会议论文
著作
奖励
专利
作者
搜索
重置
序号
标题
类型
作者
1
Precipitation Stages and Reaction Kinetics of AlMgSi Alloys during the Artificial Aging Process Monitored by In-Situ Electrical Resistivity Measurement Method
期刊论文
He Hong;Zhang Long;Li Shikang;Wu Xiaodong;Zhang Hui;Li Luoxing
2
一种自冲铆接工装及装置
专利
李落星;刘建鹏;何洪;徐从昌
3
铝合金汽车前防撞梁焊接过程的数值仿真与顺序优化
期刊论文
郭鹏程;曹淑芬;易杰;李落星
4
一种焊接接头微区力学性能的等效测试方法
专利
何洪;李落星;徐从昌
5
铝合金空心型材挤压截面内凹变形有限元分析及模具结构优化设计
期刊论文
王震虎;何芯;李落星
6
Study of the Sliding Door Shaking Problem and Optimization Based on the Application of Euler’s Spiral
期刊论文
Chen Ziming;Li Luoxing;Wu Yunlong;Zhou Wufeng
7
Modeling and simulation of the flow drill screw process of a DP590/Al6061-T6 multi-material joint used for vehicle body
期刊论文
Liu Weixue;Zhu Xuewu;Zhou Qiaoying;He Hong;Liu Jianpeng;Xu Congchang;Li Luoxing
8
一种制备超细晶块体材料的等通道挤压模具及方法
专利
李落星;叶拓;华家辉;徐从昌;何洪
9
基于响应面模型的滑移门动力学特性多目标优化
期刊论文
陈梓铭;郭鹏程;熊勇;李会玉;李落星
10
Entrance shape design of spread extrusion die for large-scale aluminum panel
期刊论文
Liu Zhiwen;Li Luoxing;Yi Jie;Wang Guan
11
Compressive deformation behavior and microstructure evolution of AM80 magnesium alloy under quasi-static and dynamic loading
期刊论文
Guo Pengcheng;Li Luoxing;Liu Xiao;Ye Tuo;Cao Shufen;Xu Congchang;Li Shikang
12
Sequential optimization and moment-based method for efficient probabilistic design
期刊论文
Wang Zhenhu;Li Hao;Chen Ziming;Li Luoxing;Hong He
13
Simulation Analysis of Porthole Die Extrusion Process and Die Structure Modifications for an Aluminum Profile with High Length-Width Ratio and Small Cavity
期刊论文
Liu Zhiwen;Li Luoxing;Li Shikang;Yi Jie;Wang Guan
14
CVDA序贯采样法在全铝车架轻量化设计上的应用
期刊论文
王哲阳;王震虎;张松波;李落星
15
A modified dynamic stiffness calculation method of rubber isolator considering frequency, amplitude and preload dependency and its application in transfer path analysis of vehicle bodies - ScienceDirect
期刊论文
Erli Xia;Zhenglin Cao;Xuewu Zhu;Sawei Qiu;Zhigang Xue;Hong He;Luoxing Li
16
FE analysis of extrusion defect and optimization of metal flow in porthole die for complex hollow aluminium profile
期刊论文
Yi Jie;Wang Zhenhu;Liu Zhiwen;Zhang Jianming;He Xin
17
Influence of the deformation heating on the flow behavior of 6063 alloy during compression at medium strain rates
期刊论文
Li Shikang;Li Luoxing;He Hong;Wang Guan
18
Precipitates Dissolution, Phase Transformation, and Re-precipitation-Induced Hardness Variation in 6082-T6 Alloy During MIG Welding and Subsequent Baking
期刊论文
Zhang Wenkang;He Hong;Xu Congchang;Yu Wanyu;Li Luoxing
19
热处理可强化铝合金时效过程的在线监测方法
专利
何洪;李落星
20
Influence of dynamic recrystallization on microstructure and mechanical properties of welding zone in Al-Mg-Si aluminum profile during porthole die extrusion
期刊论文
Li Shikang;Li Luoxing;He Hong;Liu Zhiwen;Zhang Long
21
芯轴参数对Q235A大口径薄壁钢管绕弯成形质量的影响
会议论文
刘志文;李落星;董菲菲
22
机器人主动牵引的三维变曲率型材在线弯曲成形装置
专利
李落星;刘志文;徐从昌
23
EW组合近似模型在概念铝车架断面轻量化设计中的应用
期刊论文
王哲阳;王震虎;张松波;李皓;李落星
24
Mechanical Performance Evaluation of the Al-Mg-Si-(Cu) Aluminum Alloys after Transient Thermal Shock through an Novel Equivalent Structure Design and Finite Element Modeling
期刊论文
Xu Congchang;Liu Ke;He Hong;Xiang Hanlin;Zhang Xinxin;Li Luoxing
25
基于ADAMS与Simulink联合仿真的滑移门关闭能量分析
期刊论文
陈梓铭;薛志刚;张松;李落星
26
基于响应面模型的白车身多目标轻量化设计
期刊论文
王震虎;周巧英;刘开勇;方向东;李落星
27
Influence of quenching temperature on peak aging time and hardness of Al-Mg-Si-Cu alloys strengthened by nano-sized precipitates
期刊论文
Xu Congchang;He Hong;Yu Wanyu;Li Luoxing
28
Diffusion assisted hardness recovering and related microstructural characteristics in fusion welded Al-Mg-Si alloy butt
期刊论文
Zhang Wenkang;He Hong;Shan Yilin;Sun Chaorong;Li Luoxing
29
6063挤压型材时效过程的二次相析出行为研究
会议论文
何洪;李世康;张龙;李落星
30
高性能铝合金车身型材结构件制备关键技术及应用
奖励
李落星;何洪;徐从昌;李瑞师;孙志义;杨斌;裴永胜;吴林
31
Influence of heat treatment conditions on bending characteristics of 6063 aluminum alloy sheets
期刊论文
Liu Zhiwen;Li Luoxing;Yi Jie;Li Shikang;Wang Zhenhu;Wang Guan
32
Springback behaviors of extruded 6063 aluminum profile in subsequent multi-stage manufacturing processes
期刊论文
Liu Zhiwen;Li Luoxing;Wang Guan;Chen Jingran;Yi Jie
33
大应变率范围内AM80镁合金的变形行为及组织演变
期刊论文
郭鹏程;李健;曹淑芬;徐从昌;刘志文;李落星
34
基于关闭能量的汽车滑移门闭合性能优化
期刊论文
肖良红;李晓东;陈梓铭;李落星;李俊
35
一种汽车拖车钩连接结构及汽车
专利
李落星;张欣欣;王震虎;薛志刚;徐从昌;何洪
36
基于车身概念模型的白车身主断面尺寸优化
期刊论文
王震虎;王万林;张松波;尹双;李落星
37
一种H型构件0°拉伸试验工装
专利
李落星;周巧英;何洪;徐从昌
38
铝合金车体的有限元分析和结构评估方法研究
期刊论文
王万林;徐从昌;王震虎;王哲阳;李落星
39
一种焊接接头力学性能及断裂失效仿真建模方法
专利
徐从昌;李落星;何洪
40
High-speed impact behavior of a casting AM80 magnesium alloy under various deformation temperatures
期刊论文
Guo Pengcheng;Li Luoxing;Xiao Gang;Cao Shufen;Wang Guan;He Hong
41
The Influence of Microstructural Anisotropy on the Formation of Adiabatic Shearing Bands in Extruded 7003 Aluminum Alloy Profiles During High Strain Rate Impaction
期刊论文
Wu Xiaodong;He Hong;Zhang Long;Li Luoxing;Xu Congchang;Liu Wenhui
42
铝型材挤压在线淬火系统喷嘴流速的仿真优化
期刊论文
刘志文;李落星;胡理中;王冠
43
Influence of extrusion speed on the seam weld quality in the porthole die extrusion of AZ31 magnesium alloy tube
期刊论文
Liu Zhiwen;Li Luoxing;Yi Jie;Li Shikang;Wang Guan
44
基于二次优化法的铝合金车架可靠优化设计研究
期刊论文
李皓;王震虎;李落星;朱学武
45
基于刚柔耦合动力学的玻璃升降器多目标优化研究
期刊论文
罗坤;陈梓铭;吴云龙;曾刚;李落星
46
Development of adiabatic shearing bands in 7003-T4 aluminum alloy under high strain rate impacting
期刊论文
Wu Xiaodong;Li Luoxing;Liu Wenhui;Li Sikang;Zhang Long;He Hong
47
一种型材挤压—弯曲装置
专利
李落星;许亮;何洪;周巧英;刘建鹏
48
车用变形铝合金新型材料、先进工艺和关键零件技术研发与应用
奖励
刘波;代陈绪;郭世杰;李落星;刘杨胜;陈昌云;吴仙和;张金生;刘鹏;李俊;陈海波;陆波;邱忠财
49
Grain structure and precipitate variations in 7003-T6 aluminum alloys associated with high strain rate deformation
期刊论文
He Hong;Wu Xiaodong;Sun Chaorong;Li Luoxing
50
Dynamic compression behavior of 6005 aluminum alloy aged at elevated temperatures
期刊论文
Zhang Long;He Hong;Li Shikang;Wu Xiaodong;Li Luoxing
51
6061铝合金与H13模具钢固体界面接触换热系数的反分析求解
期刊论文
刘志文;李落星;易杰;王冠
52
A detailed investigation on the grain structure evolution of AA7005 aluminum alloy during hot deformation
期刊论文
Xu Congchang;He Hong;Xue Zhigang;Li Luoxing
53
考虑被动侧动刚度的动力总成悬置传递率优化
期刊论文
周子琨;夏二立;陈梓铭;方向东;李落星
54
某型SUV空-空中冷器内部流动换热研究
期刊论文
邱飒蔚;王震虎;廖斌;夏二立;李落星
55
一种用于铆接接头试样制备的定位工装
专利
李落星;周巧英;何洪;徐从昌
56
6000系铝合金时效析出过程的原位电阻表征
期刊论文
何洪;李世康;张龙;李落星
57
多功能三人座椅与车身强度匹配探究及应用
期刊论文
马铭;郭鹏程;许弦;李落星
58
挤压速度对6063铝合金管材焊合强度的影响
期刊论文
李世康;李落星;刘志文;王冠
59
热熔自攻丝连接接头的斜拉伸试验夹具
专利
李落星;周巧英;何洪;徐从昌
60
一种H型构件90°拉伸试验工装
专利
李落星;刘伟学;何洪;徐从昌
61
Modulation of the natural aging effect on subsequent artificial aging in Al-Mg-Si aluminum alloys with alloying content similar to 1 wt% through temperature tuning
期刊论文
Yu Wanyu;He Hong;Zhang Wenkang;Li Luoxing;Sun Chaorong
62
热熔自攻丝连接接头的十字拉伸试验夹具
专利
李落星;周巧英;何洪;徐从昌
63
铝合金车身平台的基础性能关联性研究
期刊论文
王震虎;夏二立;张松波;邱飒蔚;李落星
64
一种铆接接头拉伸试验工装
专利
李落星;周巧英;何洪;徐从昌
查看更多信息请先登录或注册
相关项目
1
激光增材制造镍基合金热力协同表面强化及高温疲劳增益机理研究
2
可控热质传递的摆动激光-电弧复合增材制造控形机理研究
3
激光选区熔化成形TA15残余应力场主动控制机制及其对疲劳性能影响研究
趋势报告
国自然申请攻略干货全集(1月30日大更新)
【专业会员】独享&免费内容合集
2023年国自然二级学科资助率汇总
经验分享
国自然申请攻略干货全集(1月30日大更新)
【专业会员】独享&免费内容合集
2023年国自然二级学科资助率汇总
年份:
请选择
2022年
2021年
2020年
2019年
2018年
2017年
2016年
2015年
2014年
2013年
2012年
2011年
2010年
2009年
2008年
2007年
2006年
2005年
2004年
2003年
2002年
2001年
2000年
1999年
1998年
1997年
1996年
1995年
1994年
1993年
1992年
1991年
1990年
1989年
1988年
项目负责人:
单位名称:
提交
由于2020年国自然政策发生变化,若您身边有2020年获得过国自然的请提交一下