| 1 |
Influence of homogenizing on mechanical properties of as-cast AZ31 magnesium alloy
|
期刊论文 |
Zhang Zhi-min|Zhang Bao-hong| |
| 2 |
Analysis of local loading forming for titanium-alloy T-shaped components using slab method
|
期刊论文 |
Sun, Z.C.|Zhang, D.W.|Yang, H.| |
| 3 |
热变形对AZ80镁合金组织性能的影响
|
期刊论文 |
张治民|李保成|李兆智|杨亚琴| |
| 4 |
一种辊轮式凹模挤压成形方法
|
专利 |
张治民, 李国俊, 李保成, 李旭斌, 薛勇, 王强, 张星 |
| 5 |
Mechanism of unequal deformation during large-scale complex integral component isothermal local loading forming
|
期刊论文 |
Sun Zhichao| |
| 6 |
3D-FE modelling and simulation of multi-way loading process for multi-ported valves
|
期刊论文 |
Yang, H.|Sun, Z.C.|Zhang, D.W.| |
| 7 |
一种整体成形铝合金等径三通件的方法
|
专利 |
孙志超; 杨合; 王江辉; 王煜 |
| 8 |
一种XX铝合金轮毂成形方法
|
专利 |
张治民 |
| 9 |
挤压温度对退火态ZL102合金组织和性能的影响
|
期刊论文 |
李保成|张治民|曲明洋| |
| 10 |
Study on high temperature deformation characteristics of BTi-62421S
|
会议论文 |
Ma, Hong-Hai|Li, Bao-Cheng|Zhang, Zhi-Min|Zhang, Xing|Zhang, Hui-Fang| |
| 11 |
Influence of aging on microstructure and mechanical properties of wrought magnesium alloys
|
会议论文 |
Zhang, Zhimin|Lang, Lihui|Yang, Hui|Xue, Yong| |
| 12 |
铸态7050铝合金大应变速率下有外推能力的本构模型建立
|
期刊论文 |
杨合|孙志超|崔军辉| |
| 13 |
变形历程对TA15钛合金等温局部近β锻微观组织的影响
|
会议论文 |
杨合|樊晓光|孙志超|刘磊| |
| 14 |
Effect of forward extrusion and heat treatment on microstructure and mechanical properties of as-cast ZK60 magnesium alloy
|
会议论文 |
Zhang, Zhimin|Lang, Lihui|Xue, Yong| |
| 15 |
TA15钛合金多道次等温局部常规锻热变形行为研究
|
期刊论文 |
孙志超|樊晓光|刘磊|杨合| |
| 16 |
AZ80变形镁合金形变热处理组织性能研究
|
期刊论文 |
杨亚琴|张治民|李保成|李兆智| |
| 17 |
正挤压对铸态AZ31镁合金组织与性能的影响
|
期刊论文 |
李大旭|张治民|张宝红| |
| 18 |
TC11 alloy flow behavior and constitutive model using piecewise function of strain
|
期刊论文 |
SHEN Changwu.|YANG He|CUI Junhui|SUN Zhichao|Li Hongwei|LI Zhijun| |
| 19 |
挤压态7075铝合金高温流变行为及神经网络本构模型
|
期刊论文 |
杨合|李志颖|王煜|孙志超| |
| 20 |
止推轴承座挤压成形过程中产生折叠缺陷的原因及解决方案
|
期刊论文 |
骆庆群|张治民|李国俊| |
| 21 |
TA15钛合金复杂构件预锻初始毛坯形状优化(英文)
|
期刊论文 |
周稳静|杨合|左书鹏|孙志超|樊晓光| |
| 22 |
BTi-62421S合金高温变形流动应力模型
|
期刊论文 |
李保成|张星|张治民|张慧芳|马鸿海| |
| 23 |
一种镁合金车轮挤旋成形方法及其装置
|
专利 |
张治民, 王 强, 马春生, 张宝红 |
| 24 |
钛合金整体隔框等温成形局部加载分区研究
|
期刊论文 |
孙志超|杨合|孙念光| |
| 25 |
樊晓光.片层组织TA15钛合金热变形行为及组织球化研究
|
期刊论文 |
吴成宝|孙志超|杨合| |
| 26 |
TA15钛合金等温局部加载过渡区组织性能
|
会议论文 |
杨合|孙志超| |
| 27 |
Corrosion properties of plastically deformed AZ80 magnesium alloy
|
期刊论文 |
Li Bao-cheng|Zhang Zhi-min|Xu Hong-yan| |
| 28 |
Study on high temperature deformation characteristics of BTi-62421S
|
会议论文 |
Ma, Hong-Hai|Li, Bao-Cheng|Zhang, Zhi-Min|Zhang, Xing|Zhang, Hui-Fang| |
| 29 |
**构件轻量化关键技术及应用
|
奖励 |
张治民| |
| 30 |
TA15钛合金大型复杂整体构件预锻成形微观组织演化研究
|
会议论文 |
孙志超|周稳静|左书鹏|杨合| |
| 31 |
TA15钛合金局部加载锻件高温持久性能
|
会议论文 |
孙志超|孙念光|杨合|韩冠军| |
| 32 |
BTi-62421S 合金高温变形力学行为研究
|
会议论文 |
张治民|孟模|张慧芳|李保成|张星| |
| 33 |
镁合金高性能构件塑性成型关键技术
|
会议论文 |
张治民| |
| 34 |
大型钛合金隔框等温闭式模锻成形工艺优化
|
期刊论文 |
孙志超|孙念光|杨合| |
| 35 |
大型复杂筋板类构件局部加载等温成形宏微观模型
|
会议论文 |
杨合|张大伟|孙志超| |
| 36 |
热变形参数对BTi-62421S合金微观组织及性能的影响
|
期刊论文 |
张治民|张星|张慧芳|李保成|马鸿海| |
| 37 |
Hot deformation behavior and fracture of as-extruded 7075 aluminum alloy
|
会议论文 |
Sun, Zhichao|Wang, Jianghui|Yang, He|Wang, Yu| |
| 38 |
一种曲线回转外形××弹体的引伸辊挤成形方法
|
专利 |
张治民 |
| 39 |
铸态7050铝合金大应变速率下有外推能力的本构模型建立
|
期刊论文 |
杨合|孙志超|崔军辉| |
| 40 |
High temperature deformation behavior of BTi-62421S alloy
|
期刊论文 |
Zhang, Zhimin|Zhang, Xing|Ma, Hong-Hai|Zhang, Huifang|Li, Baochenga| |
| 41 |
Finite element simulation of aluminum alloy cross valve forming by multi-way loading
|
会议论文 |
YANG He|SUN Zhi-chao|ZHANG Da-wei| |
| 42 |
Effects of Multiple Plastic Deformations on Microstructure and Mechanical Properties of 7A04 Ultra-high Strength Aluminum Alloy
|
期刊论文 |
Ya cui | |
| 43 |
时效处理对AZ80和ZK60镁合金微观组织和力学性能的影响(英文)
|
期刊论文 |
薛勇|张治民|李艳| |
| 44 |
Microstructure and mechanical properties of TA15 titanium alloy under multi-step local loading forming
|
期刊论文 |
Sun, Zhichao|Yang, He| |
| 45 |
Modelling of Microstructure Evolution In AISI 5140 Steel Triple Valve Forming Under Multi-Way Loading
|
期刊论文 |
Sun Zhichao| |
| 46 |
Effect of plastic deformation on the mechanical properties and microstructure of homogenized AZ80 magnesium alloy
|
会议论文 |
Zhang, Zhimin|Xue, Yong|Lang, Lihui| |
| 47 |
几种基于回归方法的本构模型研究及其在TB6合金上的应用
|
期刊论文 |
孙志超|杨合|崔军辉| |
| 48 |
一种镁合金汽车车轮挤压成形方法及模具
|
专利 |
张治民, 王强, 张星, 张宝红, 于建民 |
| 49 |
基于DEFORM的履带板多向主动加载成形数值模拟
|
期刊论文 |
宁玲艳|张治民| |
| 50 |
四通阀多向加载成形参数影响模拟分析
|
期刊论文 |
孙志超|张大伟|杨合| |
| 51 |
钛合金大型复杂件预制坯成形工艺模拟研究
|
期刊论文 |
杨合|彭飞飞|高涛|樊晓光|孙志超| |
| 52 |
A study on processing map and flow stress model of AZ80 magnesium alloy forming at elevated temperature
|
会议论文 |
Wu, Yaojin|Xue, Yong|Zhang, Zhimin| |
| 53 |
钛合金筋板件等温局部加载模具应力分析
|
会议论文 |
暴志峰|杨合|孙志超| |
| 54 |
三通件多向加载成形热力耦合有限元分析
|
期刊论文 |
孙志超|张大伟|杨合|郭晓锋| |
| 55 |
Analysis on process and forming defects of large-scale complex integral component isothermal local loading
|
会议论文 |
Sun Zhichao|Wu Yuejiang|Yang He| |
| 56 |
TA15合金H型构件等温局部加载成形工艺研究
|
期刊论文 |
孙志超|李志燕|杨合| |
| 57 |
TA15钛合金局部加载成形工艺
|
会议论文 |
暴志峰|李志燕|孙志超|杨合| |
| 58 |
空心坯料反挤压省力成形方法及应用研究
|
期刊论文 |
王强|张治民| |
| 59 |
履带板挤压成形加载速度对金属流动规律影响的研究
|
期刊论文 |
张治民|宁玲艳| |
| 60 |
轻量化材料与构件精确塑性成形先进技术研究进展
|
会议论文 |
詹梅|杨合|孙志超| |
| 61 |
**传动、行动构件轻量化关键技术及应用
|
奖励 |
张治民| |
| 62 |
Modeling for Microstructure Evolution in Titanium Alloy Large-Scale Complex Component Isothermal Forming under Local Loading
|
会议论文 |
Fan xiaoguang|Sun Zhichao|Yang He| |
| 63 |
A study on the phenomenological constitutive models of AZ80 and AZ31 magnesium alloy forming at elevated temperatures
|
会议论文 |
Xue, Yong|Lu, Guang|Wu, Yao Jin|Zhang, Zhi Min| |
| 64 |
TA15钛合金复杂构件预锻初始毛坯形状优化(英文)
|
期刊论文 |
周稳静|杨合|左书鹏|孙志超|樊晓光| |
| 65 |
Microstructural evolution model of TA15 titanium alloy based on BP neural network method and application in isothermal deformation
|
期刊论文 |
Sun, Zhichao|Tang, Ze|Yang, He| |
| 66 |
AZ80镁合金热变形中第二相析出机理研究
|
期刊论文 |
李兆智|李保成|张治民|杨亚琴| |
| 67 |
Study on forming feasibility of AISI-5140 triple valve by multi-way loading: From aspect of geometric parameters
|
会议论文 |
Yang, He|Wang, Jianghui|Sun, Zhichao| |
| 68 |
×××过渡区组织性能控制方法
|
专利 |
孙志超; 杨合; 樊晓光 |
| 69 |
New extrusion process of Mg alloy automobile wheels
|
期刊论文 |
Li Guo-jun|Zhang Xing|Wang Qiang|Zhang Zhi-min| |
| 70 |
Microstructure evolution of different loading zones during TA15 alloy multi-cycle isothermal local forging
|
期刊论文 |
Liu, Lei|Yang, He|Sun, Zhichao| |
| 71 |
AISI-5140三通阀多向加载成形开裂预测
|
会议论文 |
李志颖|孙志超|张大伟|杨合| |
| 72 |
车辆用镁合金大型承力构件控制成形技术及装置
|
奖励 |
张治民| |
| 73 |
3D-FE modelling and simulation of multi-way loading process for multi-ported valves
|
期刊论文 |
Yang, H.|Sun, Z.C.|Zhang, D.W.| |
| 74 |
挤压变形对ZL102材料组织和性能的影响
|
期刊论文 |
张星|张治民|张爱云| |
| 75 |
Influence of Solution Treatment on Impact Toughness and Microstructure of Cobalt-free Maraging Steel
|
期刊论文 |
Zhang Baohong|Li Baocheng|Yu Jianmin|Yang Weiyu| |
| 76 |
一种汽车轮毂省力成形方法及装置
|
专利 |
张治民, 王强, 张星, 张宝红, 李保成 |
| 77 |
A numerical model based on internal-state-variable method for the microstructure evolution during hot-working process of TA15 titanium alloy
|
期刊论文 |
Yang, H.|Han, G.J.|Sun, Z.C.|Fan, X.G.| |
| 78 |
Influence of Plastic Deformation on the Mechanical Properties and icrostructure of Homogenized AZ80 Magnesium Alloy
|
期刊论文 |
Yaojin Wu| |
| 79 |
一种XX用大规格铝合金轮辋成形方法
|
专利 |
张治民 |
| 80 |
TA15合金大型筋板件等温局部加载晶粒尺寸演化研究
|
会议论文 |
韩冠军|樊晓光|孙念光|杨合|孙志超| |
| 81 |
Microstructure evolution of different loading zones during TA15 alloy multi-cycle isothermal local forging
|
期刊论文 |
Liu, Lei|Yang, He|Sun, Zhichao| |
| 82 |
高性能构件精确控制塑性成形基础理论研究
|
奖励 |
张治民| |
| 83 |
Influence of plastic deformation on the microstructure and wear properties of as-cast HAL60-1-1 Al-brass.
|
期刊论文 |
zhang baohong| |
| 84 |
A numerical model based on internal-state-variable method for the microstructure evolution during hot-working process of TA15 titanium alloy
|
期刊论文 |
Yang, H.|Han, G.J.|Sun, Z.C.|Fan, X.G.| |
| 85 |
Study on mechanical behavior for warm extrusion of AZ61 magnesium alloy
|
期刊论文 |
Zhang, Zhi-Min|Li, Bao-Cheng|Zhang, Xing| |
| 86 |
Microstructure and mechanical properties of TA15 titanium alloy under multi-step local loading forming
|
期刊论文 |
Sun, Zhichao|Yang, He| |
| 87 |
几种基于回归方法的本构模型研究及其在TB6合金上的应用
|
期刊论文 |
孙志超|杨合|崔军辉| |
| 88 |
sothemal Local Loading Technology and its Application in Large-Scale Integral Component Forming of Ti-alloy
|
会议论文 |
Zhichao Sun| |
| 89 |
枝杈类壳体零件多向主动加载成形模具结构参数优化
|
期刊论文 |
张治民 |于建民|王子田|王强| |
| 90 |
EFFECT OF INITIAL STATE ON GRAIN REFINEMENT STRENGTHENING OF az31 magnesium alloy
|
会议论文 |
jianmin yu| |
| 91 |
Influence of Plastic Deformation on Mechanical Properties and Microstructure of Annealed ZL102 Alloy
|
期刊论文 |
jianmin Yu| |
| 92 |
基于逐步回归法的TA15钛合金本构模型的建立
|
会议论文 |
孙志超|杨合|沈昌武| |
| 93 |
Analysis of local loading forming for titanium-alloy T-shaped components using slab method
|
期刊论文 |
Sun, Z.C.|Zhang, D.W.|Yang, H.| |
| 94 |
Characteristic of large-scale and complex rib-web components isothermal local loading forming
|
会议论文 |
Sun Zhichao|Yang He| |
| 95 |
Analysis on flow stress of magnesium alloys during high temperature deformation
|
期刊论文 |
Yang Ya-qin|Zhang Zhi-min|Li Bao-cheng| |
| 96 |
Analysis on process and forming defects of large-scale complex integral component isothermal local loading
|
会议论文 |
Yang, He|Sun, Zhichao| |
| 97 |
TA15钛合金局部加载成形件的热处理
|
会议论文 |
郭晓锋|孙志超|彭飞飞|杨合| |
| 98 |
Effect of deformation condition on the mechanical behavior of AZ80 magnesium alloy
|
期刊论文 |
Wu, Y.J.|Wang, Q.|Zhang, X.|Li, B.C.|Zhang, Z.M.| |
| 99 |
Effect of Extrusion Ratio on Microstructure and Mechanical Properties of As-cast AZ91D Magnesium Alloy
|
期刊论文 |
zhimin zhang|baohong zhang| |
| 100 |
Transformation mechanism of lamellar microstructure of AZ80 wrought Mg alloy during warm deformation
|
期刊论文 |
Yang Ya-qin|Li Zhao-zhi|Zhang Zhi-min| |
| 101 |
Forming Quality of Titanium Alloy Large-Scale Integral Components Isothermal Local Loading
|
期刊论文 |
Sun Zhichao| |
| 102 |
High temperature deformation behavior of BTi-62421S alloy
|
期刊论文 |
Zhang, Zhimin|Zhang, Xing|Ma, Hong-Hai|Zhang, Huifang|Li, Baochenga| |
| 103 |
某筒形件壳体冷冲压工艺编制及模具设计
|
期刊论文 |
徐兴学|罗金山|张治民| |
| 104 |
多向加载近净成形研究动态
|
会议论文 |
杨合|张大伟|孙志超| |
| 105 |
金属塑性成形多向数控液压机
|
专利 |
张治民, 于建民, 王强, 张宝红, 张星, 李保成, 崔亚 |
| 106 |
Effects of Parameters on Inhomogeneous Deformation and Damage in Isothermal Local Loading Forming of Ti-Alloy Component . Journal of Materials Engineering and Performance
|
期刊论文 |
SUN Zhichao|YANG He|SUN Nianguang| |
| 107 |
Microstructure evolution of different loading zones during TA15 alloy multi-cycle isothermal local forging
|
期刊论文 |
Liu, Lei|Sun, Zhichao|Yang, He| |
| 108 |
Effect of Aging on the Microstructures and Mechanical Properties of AZ80 and ZK60 Wrought Magnesium Alloys
|
期刊论文 |
Y. J.Wu| |
| 109 |
3D FE simulation on large-scale complex integral component isothermal local loading forming
|
会议论文 |
Sun Zhichao| |
| 110 |
sothemal Local Loading Technology and its Application in Large-Scale Integral Component Forming of Ti-alloy
|
会议论文 |
Zhichao Sun| |
