微孔发泡连续纤维增强热塑性单聚合物复合材料制品的注射成型机理研究

51873021
2018
E0303.高分子材料加工与成型
王建
面上项目
教授
北京化工大学
59万元
连续纤维;微孔发泡;聚丙烯;注射成型;单聚合物复合材料
2019-01-01到2022-12-31
  • 中英文摘要
  • 结题摘要
  • 结题报告
  • 项目成果
  • 项目参与人
查看更多信息请先登录或注册
查看更多信息请先登录或注册
查看更多信息请先登录或注册
重置
序号 标题 类型 作者
1 Mechanical properties of polyacrylonitrile nascent fibers prepared by 100+ L/D ratio Tse with different screw speed 会议论文 Zhang Shuimu;Wang Jian;Shi Shan;Ding Yongzhi
2 混杂碳质填料对聚丙烯流变性能的影响 期刊论文 邵明旺;王建;彭炯;赵亚凤;刘方可;丁永志
3 The incorporation of graphene to enhance mechanical properties of polypropylene self-reinforced polymer composites 期刊论文 Wang Jian;Song Feiyan;Ding Yongzhi;Shao Mingwang
4 聚丙烯混杂碳质填料复合材料的导电性能 期刊论文 王建;张谦;邵明旺
5 聚丙烯单聚合物复合材料的制备方法及应用研究现状 期刊论文 何跃龙;王建;何其超
6 单聚合物复合材料制品过冷膜过热丝成型方法及装置 专利 王建
7 单聚合物复合材料管 专利 王建
8 塑料齿轮及其成型设备与方法 专利 王建
9 精密塑料制品注射成型关键技术及装备的开发与应用 奖励 谢鹏程;王建;傅南红;张弛;杨卫民;高世权;陈邦锋;朱宁迪;焦晓龙;许宇轩
10 Measurement of specific volume of polymers under simulated injection molding processes 期刊论文 Wang Jian;Hopmann Christian;Kahve Cemi;Hohlweck Tobias;Alms Jonathan
11 Internal Circulation Clamping System with Supplementary Volume for Small and Medium Types of Two-platen Injection Molding Machine 期刊论文 Wang Jian;Yang Lu
12 Modeling of pvT behavior of semi-crystalline polymer based on the two-domain Tait equation of state for injection molding 期刊论文 Wang Jian;Hopmann Christian;Schmitz Mauritius;Hohlweck Tobias;Wipperfuerth Jens
13 双组份单聚合物复合材料制品热压成型方法及装置 专利 王建
14 Process dependence of pressure-specific volume-temperature measurement for amorphous polymer: Acrylonitrile-butadiene-styrene 期刊论文 Wang Jian;Hopmann Christian;Schmitz Mauritius;Hohlweck Tobias
15 Continuous two-domain equations of state for the description of the pressure-specific volume-temperature behavior of polymers 期刊论文 Wang Jian;Hopmann Christian;Röbig Malte;Hohlweck Tobias;Kahve Cemi;Alms Jonathan
16 Gel-spinning of ultra-high molecular weight polyethylene by a twin-screw extruder with an ultra-large length-to-diameter ratio 期刊论文 Wang Jian;Hu Xiaofeng;Liu Fangke;Long Zhibin;Shao Mingwang
17 高密度聚乙烯单聚合物复合材料的制备及性能 期刊论文 丁永志;王建;彭炯;邵明旺;刘方可
18 连续纤维增强热塑性聚合物复合材料管成型设备和方法 专利 王建
19 超高分子量聚乙烯凝胶的流变行为 期刊论文 刘方可;王建;彭炯;安明月;邵明旺;丁永志
20 Self-reinforced composites based on polypropylene fiber and graphene nano-platelets/polypropylene film 期刊论文 Wang Jian;Zhang Qian;Cheng Yue;Song Feiyan;Ding Yongzhi;Shao Mingwang
21 Effects of injection molding parameters on properties of insert-injection molded polypropylene single-polymer composites 期刊论文 Wang Jian;Mao Qianchao;Jiang Nannan;Chen Jinnan
22 The effect of graphene nanoplatelets on the complex viscocity of high density polyethylene 会议论文 Xu Yue;Wang Jian;Peng Jiong;Ding Yongzhi
23 Prediction of specific volume of polypropylene at high cooling rates by artificial neural networks 期刊论文 Wang Jian;Hopmann Christian;Liu Ben;Lockner Yannik
24 Unidirectional continuous fiber-reinforced polypropylene single-polymer composites prepared by extrusion-calendering process 期刊论文 Wang Jian;Song Feiyan;Yu Mingxing
25 Fabric Insert Injection Molding for the Preparation of Ultra-High Molecular Weight Polyethylene/High-Density Polyethylene Two-Component Self-Reinforced Composites 期刊论文 Wang Jian;Wang Da;Mao Qianchao;Chen Jinnan
26 Modeling of pressure-specific volume-temperature behavior of polymers considering the dependence of cooling and heating processes 期刊论文 Wang Jian;Hopmann Christian;Röbig Malte;Hohlweck Tobias;Alms Jonathan
27 Influence of measurement processes on pressure-specific volume-temperature relationships of semi-crystalline polymer: Polypropylene 期刊论文 Wang Jian;Hopmann Christian;Schmitz Mauritius;Hohlweck Tobias
28 塑料齿轮及其成型制造技术进展 期刊论文 李福海;王达;王建
29 单聚合物复合材料制品过热丝预紧装置 专利 王建
查看更多信息请先登录或注册

相关项目

趋势报告

经验分享