基于形变补偿、晶体取向及多介质微量润滑的铝合金高速切削残余应力控制机理研究

51705270
2017
E0505.机械摩擦学与表面技术
张平
青年科学基金项目
教授
青岛理工大学
25万元
微量润滑;残余应力;形变补偿;高速切削;晶体取向
2018-01-01到2020-12-31
  • 中英文摘要
  • 结题摘要
  • 结题报告
  • 项目成果
  • 项目参与人
查看更多信息请先登录或注册
查看更多信息请先登录或注册
查看更多信息请先登录或注册
重置
序号 标题 类型 作者
1 表面改性对滑动轴承弹流润滑的影响 期刊论文 周亚博;王优强;魏聪;龙慎文
2 A study on the dynamic mechanical behavior and microtexture of 6082 aluminum alloy under different direction 期刊论文 Zhang Ping;Song Aili;Fang Yuxin;Yue Xiujie;Wang Yougiang;Yu Xiao
3 Effects of shear strain and annealing on the nano-precipitate phase and crystal orientation of 7055 aluminum alloy during cutting process 期刊论文 Zhang Ping;Wang Youqiang
4 Effects of heat treatment on the nanoscale precipitation behavior of 7055 aluminum alloy under dynamic shock 期刊论文 Zhang Ping;Wang Youqiang
5 Finite element analysis of TC17 Ti alloy under high-speed cutting based on its friction model of deformation zone 期刊论文 Zhang Ping;Wang Youqiang;Liu Wenhui
6 海水润滑UHMWPE轴承不同加减速形式润滑分析 期刊论文 谢奕浓;王优强;宋晓萍;赵晶晶
7 水润滑螺旋阶梯腔艉轴承的振动特性 期刊论文 龙慎文;王优强;周亚博;魏聪
8 Energy absorption and impact resistance of sandwich composite alloy structures under dynamic impact 期刊论文 Zhang Ping;Wang Youqiang;Zhang Xiancheng
9 刚玉砂轮外圆磨削微观热流体动压效应分析 期刊论文 宋晓萍;王优强;谢奕浓;赵晶晶
10 橡胶轴承黏弹性和振动载荷耦合润滑特性研究 期刊论文 周亚博;王优强;魏聪;龙慎文
11 一种基于物理特性的多介质混合高速切削微量润滑雾化系统 专利 张平;王优强;王立梅;王涛;王建
12 汽车差速器锥齿轮差速工况下的润滑特性研究 期刊论文 魏聪;王优强;周亚博;龙慎文
13 刃倾角对7055铝合金高速切削过程的影响研究 期刊论文 于晓;王优强;张平;刘纪新;宗成国
14 A Newtonian thermal elastohydrodynamic lubrication model for ferrofluid-lubricated involute spur gear pair 期刊论文 Zhao Jing-jing;Wang You-qiang;Zhang Ping;Jian Guang-xiao
15 一种基于物联网的射孔枪内盲孔切削加工控制系统及方法 专利 张平;王优强;赵晶晶;魏聪;于晓
16 7075铝合金超声振动切削残余应力的仿真及实验 期刊论文 罗恒;王优强;张平
17 橡胶蠕变特性对水润滑橡胶轴承弹流润滑的影响 期刊论文 周亚博;王优强;龙慎文;魏聪
18 Experiment and simulation on the high-speed milling mechanism of aluminum alloy 7050-T7451 期刊论文 Zhang Ping;Xiujie Yue;Han Shuangfeng;Song Ailing;Li Baoshun;Yu Xiao
19 Analysis of lubricating performance for involute spur gear under vibration 期刊论文 Jian Guangxiao;Wang Youqiang;Zhang Ping;Xie Yinong;Zhao Jingjing
20 低粘度多介质三体接触软弹流润滑理论与关键技术研究 奖励 王优强;张平;刘新福;任付娥;王建;徐彩红;龙慎文;周亚博;魏聪;于晓
21 A study on microstructure evolution and corrosion resistance of cutting layer metal of 7055 aluminum alloy based on extreme environment 期刊论文 Ping Zhang;Youqiang Wang;Weihui Li;Qing Wang;Yuanyuan Li
22 Research on the Large Plastic Deformation Damage and Shock Resistance of 7055 Aluminum Alloy 期刊论文 Zhang Ping;Wang Youqiang;Luo Heng;Long Shenwen;Wei Cong
23 不同润滑条件下PA66的摩擦学性能研究 期刊论文 李云凯;王优强;谢奕浓;龙慎文
24 Simulation and experimental study of 7A09 aluminum alloy milling under double liquid quenching 期刊论文 Luo Heng;Wang You-qiang;Zhang Ping
25 变位斜齿轮弹流润滑的现状及发展趋势 期刊论文 赵晶晶;王优强
26 The Influence of Heat Treatment on Nanoscale Microstructure and Crystal Orientation of 7055 Aluminum Alloy Before and After High-Speed Milling 期刊论文 Zhang Ping;Wang Youqiang
27 Research on the nanocutting mechanism of Ni-Fe-Cr-based superalloys: Conventional cutting versus UEVC 期刊论文 Ping Zhang;Xiancheng Zhang;Xiao yu;Youqiang Wang
28 A study on chip and microstructure of 7055 aluminum alloy's 3D HSC based on FEM and experiment 期刊论文 Zhang Ping;Wang Youqiang
29 Effect of cutting parameters on machinability of 7075-T651 aluminum alloy in different processing methods 期刊论文 Luo Heng;Wang Youqiang;Zhang Ping
30 Effect of cutting and vibration parameters on the cutting performance of 7075-T651 aluminum alloy by ultrasonic vibration 期刊论文 Luo Heng;Wang Youqiang;Zhang Ping
31 The mechanical behaviors and energy absorption mechanisms of Al-Cu-Mn alloy under dynamic penetration at wide temperature ranges and large angles 期刊论文 Zhang Ping;Wang Youqiang;Yu Xiao;Luo Heng
32 Research on the effect of aging time on the microstructure of 7055 aluminum alloy 期刊论文 Li Yuanyuan;Zhang Ying;Han Shuangfeng;Wang Qing;XiaoYu
33 新型复合型艉轴承的流体特性研究 期刊论文 龙慎文;王优强;周亚博;魏聪
34 汽车差速器锥齿轮差速工况下的热弹流润滑分析 期刊论文 魏聪;王优强;周亚博;龙慎文
35 Research on High Speed Machining of TC17 Titanium Alloy Under Extreme Environments 期刊论文 Zhang Ping;Wang Youqiang
36 7075铝合金高速铣削表面质量及刀具磨损机理 期刊论文 岳修杰;张平;宋爱利;李宝顺;于晓
37 Dislocation damage and adiabatic shear mechanisms of 7055 aluminum alloy during cutting process 期刊论文 Zhang Ping;Wang Youqiang;Wang Qing;Yu Xiao
38 A study on the dynamic shock performance of 7055-T6I4 aluminum alloy based on experimental and simulation 期刊论文 Ping Zhang;Youqiang Wang;Yinong Xie;Yabo Zhou
39 低粘度多介质三体接触软弹流润滑理论与实验研究 奖励 王优强;张平;刘新福;任付娥;徐彩红;王建;于晓;赵晶晶
40 Analysis of the microhardness, mechanical properties and electrical conductivity of 7055 aluminum alloy 期刊论文 Ping Zhang;Yuanyuan Li;Yanan Liu;Ying Zhang;Jixin Liu
41 基于有限长线接触的锥齿轮热弹流润滑分析 期刊论文 魏聪;王优强;周亚博;龙慎文
42 水润滑动静压陶瓷轴承的热弹流润滑分析 期刊论文 张同钢;王优强;徐彩红;王立梅
43 直齿圆锥齿轮的时变弹流润滑分析 期刊论文 魏聪;王优强;周亚博;龙慎文
44 On the precipitation behaviour of 7055 aluminium alloy during high-speed cutting 期刊论文 Zhang Ping;Wang Youqiang;Wang Qing
45 基于谐响应分析的艉轴承动态特性研究及灵敏度分析 期刊论文 龙慎文;王优强;周亚博;魏聪
46 变位斜齿轮的热弹流润滑数值分析 期刊论文 赵晶晶;王优强;谢奕浓;宋晓萍
47 Effects of cutting parameters on the subsurface damage of single crystal copper during nanocutting process 期刊论文 Ping Zhang;Xian Cao;Xiancheng Zhang;Youqiang Wang
48 Analysis on the tool wear behavior of 7050-T7451 aluminum alloy under ultrasonic elliptical vibration cutting 期刊论文 Ping zhang;Xiancheng Zhang;Xian Cao;Xiao Yu;Youqiang Wang
查看更多信息请先登录或注册

相关项目

趋势报告

经验分享