Ti2AlNb双层结构脉冲电流辅助超塑成形/扩散连接控形控性控构基础研究

51875122
2018
E0508.成形制造
王国峰
面上项目
教授
哈尔滨工业大学
61万元
超塑性;电流辅助成形;电塑性;扩散连接;变形机理
2019-01-01到2022-12-31
  • 中英文摘要
  • 结题摘要
  • 结题报告
  • 项目成果
  • 项目参与人
查看更多信息请先登录或注册
查看更多信息请先登录或注册
查看更多信息请先登录或注册
重置
序号 标题 类型 作者
1 Air atmosphere diffusion bonding of Al–Mg–Li alloy using Cu nano-coating interlayer: Microstructural characterization and formation mechanisms 期刊论文 Yongkang Liu;Guofeng Wang;Yuqing Chen;Qingxin Kang;Shuyi Luo;Zhenlun Li;Xunhu Xu;Qing Liu;Xiaochong Sui
2 The Process Design and Rapid Superplastic Forming of Industrial AA5083 for a Fender with a Negative Angle in a Small Batch 期刊论文 Z. Du;G. Wang;H. Wang
3 大国重器驱动材料成型及控制工程专业创新型领军人才培养教学改革实践 奖励 王国峰;姜巨福;孙宇;刘祖岩;王小松;刘钢;卢振
4 一种点阵位置可控的钛合金空间点阵轻量化结构成形方法 专利 王国峰;刘青;周彤旭;陈玉清;骆姝伊
5 Electrically assisted diffusion bonding of Ti2AlNb alloy sheet using CP-Ti foil interlayer: Microstructural characterization and mechanical tests 期刊论文 X. Li;G. Wang;Y. Gu;J. Yang
6 Electrically assisted superplastic forming/diffusion bonding of the Ti2AlNb alloy sheet 期刊论文 X. Li;G. Wang;J. Zhang;Y. Liu
7 The superplastic forming/diffusion bonding of TA7 titanium alloy for manufacturing hollow structure with stiffeners 期刊论文 Z. Du;C. Wang;Q. Liu;S. Wang;Y. Liu;G. Wang
8 难变形合金异形整体薄壳双调热介质压力成形技术 奖励 苑世剑;何祝斌;郎利辉;王国峰;凡晓波;刘钢
9 Investigation for oxidation mechanism of CrN: A combination of DFT and ab initio molecular dynamics study 期刊论文 Q. Kang;G. Wang;Q. Liu;X. Sui;Y. Liu;Y. Chen;S. Luo;Z. Li
10 Atomic level insights into the Ti2AlC oxidation mechanism by the combination of density functional theory and ab initio molecular dynamics calculations 期刊论文 Q. Kang;G. Wang;Q. Liu;X. Sui;Y. Liu;Y. Chen
11 Molecular dynamics simulation and experimental verification of the crystallization behavior of a Ti–Zr–Ni alloy prepared by SPS low temperature liquid phase sintering 期刊论文 S. Luo;J. Luo;Q. Kang;Z. Li;G. Wang
12 一种铝合金同步超塑成形扩散连接方法 专利 王国峰;刘永康;陈玉清;康庆鑫;骆姝伊
13 一种硬质合金三刃刀具烧结成形一体化模具及制备方法 专利 王国峰;刘青;李丹峰;隋小冲
14 一种铝合金表面活化非真空扩散焊接及后续热处理方法 专利 王国峰;刘永康;李振伦;王珊
15 Fabricating Ti2AlNb sheet with high tensile strength and good ductility by hot packed rolling the spark plasma sintered pre-alloyed powder 期刊论文 G. Wang;X. Sui;Q. Liu;Y. Liu
16 Effects of electropulsing treatment on the microstructural evolution of hot-rolled TiBw/TA15 composite billet with a network architecture 期刊论文 X. Xu;Q. Kang;Y. Liu;Z. Li;G. Wang
17 Ultra-fine grain TixVNbMoTa refractory high-entropy alloys with superior mechanical properties fabricated by powder metallurgy 期刊论文 Q. Liu;G. Wang;X. Sui;Y. Xu;Y. Liu;J. Yang
18 龙江工匠 奖励 王国峰
19 Theoretical research for oxidation mechanism of α-Ti: A combination of DFT and ab initio molecular dynamics study 期刊论文 Q. Kang;G. Wang;Q. Liu;X. Sui;Y. Liu;Y. Chen;S. Luo;Z. Li
20 Fast recrystallization and phase transformation in ECAP deformed Ti–6Al–4V alloy induced by pulsed electric current 期刊论文 Z. Zhao;G. Wang;Y. Zhang;Y. Wang;H. Hou
21 Experimental and theoretical study for hot corrosion behavior of network structured TiBw/TA15 composite with NaCl film at 800 ℃ 期刊论文 Q. Kang;G. Wang;Y. Liu;Y. Chen;S. Luo
22 一种铝合金构件气动柔性电极加热夹持装置及模内淬火成形方法 专利 王国峰;赖小明;顾义斌;王博;易卓勋;张敬轩
23 2B06铝合金双层结构件DB&SPF组合工艺研究 期刊论文 王国峰;张建威;张晓巍
24 一种互为对称特征件用的两件一模成形方法 专利 王国峰;林海朋;杜志豪;李振伦;刘永康
25 The defining role of ultrasonic on the relaxed GBs and superior thermal stability of copper coatings 期刊论文 Y. Liu;G. Wang;Q. Liu;X. Sui;S. Luo;Z. Li;Q. Kang
26 Microstructure and mechanical properties of ultra-fine grained MoNbTaTiV refractory high-entropy alloy fabricated by spark plasma sintering 期刊论文 Q. Liu;G. Wang;X. Sui;Y. Liu;X. Li;J. Yang
27 Achieving high ductility of Ti2AlNb sheet without sacrificing the tensile strength without post heat treatment 期刊论文 X.C. Sui;Q. Liu;S.Y. Luo;Y.K. Liu;Z.L. Li;Q.X. Kang;G.F. Wang
28 Temperature distribution and effect of low-density electric current on B2+O lamellar microstructure of Ti2AlNb alloy sheet during resistance heating 期刊论文 G.-f. Wang;X. Li;D.-f. Li;Y.-b. Gu;H. Fang
29 碳化硅、碳化硼新型材料加工及制品应用开发 奖励 张继红;韩文波;韩春源;桑井茂;王国峰;宋颖;李颖;孙利民;苏贻波
30 高性能复杂整体薄壁构件高效精确热介质压力成形技术 奖励 苑世剑;何祝斌;郎利辉;王国峰;凡晓波;刘钢
31 Investigation on the ageing behaviour and hardening mechanisms of 5A90 Al–Li alloy U-shaped parts formed by electric resistance heating forming-quenching process 期刊论文 Y. Liu;X. Lai;Y. Gu;B. Wang;G. Wang;Q. Liu
32 一种表面活化铝合金电流辅助非真空扩散焊接方法 专利 王国峰;刘永康;刘青;骆姝伊;王春旭
33 Hot pack rolling of spark-plasma-sintered pre-alloyed powders to fabricate Ti2AlNb sheets 期刊论文 X. Sui;G. Wang;Q. Liu;S. Luo
34 Synthesis and thermal stability of a nanocrystalline MoNbTaTiV refractory high-entropy alloy via mechanical alloying 期刊论文 G. Wang;Q. Liu;J. Yang;X. Li;X. Sui;Y. Gu;Y. Liu
35 Diffusion Bonding of Ti6Al4V at Low Temperature via SMAT 期刊论文 Y. Chen;G. Wang;Y. Liu;L. Zhan;H. Diao;Y. Wang
36 Hot deformation behaviors of an ultrafine-grained MoNbTaTiV refractory high-entropy alloy fabricated by powder metallurgy 期刊论文 Q. Liu;G. Wang;Y. Liu;X. Sui;Y. Chen;S. Luo
37 Microstructural behavior and mechanical properties of nanocrystalline Ti-22Al-25Nb alloy processed by high-pressure torsion 期刊论文 J. Yang;G. Wang;J.M. Park;H.S. Kim
38 Microstructure evolution during hot-packed rolling and mechanical properties anisotropy of as-rolled network-structured TiBw/TA15 composites 期刊论文 Z. Li;Q. Kang;G. Wang ;X. Sui;Y. Liu;S. Luo
39 Finite Element Simulation and Low‐Temperature Spark Plasma Sintering for Ti–Zr–Ni Alloy 期刊论文 S. Luo;J. Luo;Y. Liu;Z. Li;G. Wang
40 Fabricating Ti2AlNb sheet with tensile strength higher than 1500 MPa by hot packed rolling spark-plasma-sintered pre-alloyed Ti2AlNb powder at the B2 + O phase field 期刊论文 X. Sui;G. Wang;Q. Liu;Y. Liu;Y. Chen
41 一种基于高表面质量轻质合金三维点阵夹层结构制备方法 专利 王国峰;周彤旭;刘青;李振伦;康庆鑫
42 一种Ti2AlNb合金板材制备方法 专利 王国峰;隋小冲;刘永康;刘青;李骁
查看更多信息请先登录或注册

相关项目

趋势报告

经验分享