| 1 |
第二十一届中国国际工业博览会高校展区“优秀展品奖”,激光增材制造高性能金属基复合材料构件跨尺度调控技术(南京航空航天大学)
|
奖励 |
顾冬冬 |
| 2 |
Laser powder bed fusion of diatom frustule inspired bionic NiTi lattice structures: Compressive behavior and shape memory effect
|
期刊论文 |
Jianfeng Sun;Dongdong Gu;Kaijie Lin;Luhao Yuan;Jiankai Yang;Wei Chen |
| 3 |
铝合金激光增材制造支撑布局及精确成形机制
|
期刊论文 |
杨建凯;顾冬冬;葛庆;檀晨晨;文雨 |
| 4 |
Microstructure evolution and high-temperature oxidation behaviour of selective laser melted TiC/TiAl composites
|
期刊论文 |
Chenglong Ma;Dongdong Gu;Donghua Dai;Han Zhang;Hongmei Zhang;Jiangkai Yang;Meng Guo;Yuexin Du;Jie Gao |
| 5 |
Multi-material additive manufacturing of a bio-inspired layered ceramic/metal structure: Formation mechanisms and mechanical properties
|
期刊论文 |
Rui Wang;Dongdong Gu;Kaijie Lin;Caiyan Chen;Qing Ge;Deli Li |
| 6 |
Metallic integrated thermal protection structures inspired by the Norway spruce stem: Design, numerical simulation and selective laser melting fabrication
|
期刊论文 |
Kaijie Lin;Kaiming Hu;Dongdong Gu |
| 7 |
Influence of scanning strategy and parameter on microstructural feature, residual stress and performance of Sc and Zr modified Al–Mg alloy produced by selective laser melting
|
期刊论文 |
Han Zhang;Dongdong Gu;Donghua Dai;Chenglong Ma;Yuxin Li;Ruolin Peng;Shuhui Li;Gang Liu;Biqi Yang |
| 8 |
Development of interfacial stress during selective laser melting of TiC reinforced TiAl composites: Influence of geometric feature of reinforcement
|
期刊论文 |
Chenglong Ma;Dongdong Gu;Donghua Dai;Hongmei Zhang;Lei Du;Han Zhang |
| 9 |
Laser absorption behavior of randomly packed powder-bed during selective laser melting of SiC and TiB2 reinforced Al matrix composites
|
期刊论文 |
Dongdong Gu;Ying Yang;Lixia Xi;Jiankai Yang;Mujian Xia |
| 10 |
Optimization of bio-inspired bi-directionally corrugated panel impact-resistance structures: Numerical simulation and selective laser melting process
|
期刊论文 |
Jiankai Yang;Dongdong Gu;Kaijie Lin;Ying Yang;Chenglong Ma |
| 11 |
Novel WC-reinforced iron-based composites with excellent mechanical properties synthesized by laser additive manufacturing: Underlying role of reinforcement weight fraction
|
期刊论文 |
Hongyu Chen;Dongdong Gu;Hongmei Zhang;Lixia Xi;Tiwen Lu;Liang Deng;Uta Kühn;Konrad Kosiba |
| 12 |
高性能金属基复合材料构件激光增材制造的跨尺度形性调控机制
|
奖励 |
顾冬冬;戴冬华;李雅莉;沈以赴;贾清波;袁鹏鹏 |
| 13 |
第四届中国(国际)3D打印创意设计大赛高校(国际)组三等奖
|
奖励 |
袁鲁豪 |
| 14 |
面向增材制造的材料-结构-工艺特征融合高性能设计理论与方法
|
奖励 |
朱继宏;张卫红;高彤;林晔;谷小军;孟亮 |
| 15 |
Influence of environmental constraints and carrier gas velocity on powder concentration and temperature distribution during laser inside additive manufacturing process
|
期刊论文 |
Yanze Li;Dongdong Gu;Xinyu Shi;Donghua Dai;Qing Ge;Yixuan Sun;Shuhui Li |
| 16 |
Microstructure characteristics and its formation mechanism of selective laser melting SiC reinforced Al-based composites
|
期刊论文 |
Xuan Zhao;Dongdong Gu;Chenglong Ma;Lixia Xi;Han Zhang |
| 17 |
Laser additive manufacturing of bio-inspired lattice structure: Forming quality, microstructure and energy absorption behavior
|
期刊论文 |
Yuexin Du;Dongdong Gu;Lixia Xi;Donghua Dai;Tong Gao;Jihong Zhu;Chenglong Ma |
| 18 |
ZrC+TiC synergically reinforced metal matrix composites with micro/nanoscale reinforcements prepared by laser powder bed fusion
|
期刊论文 |
Lixia Xi;Lili Feng;Dongdong Gu;Ruiqi Wang;Baran Sarac;Konda Gokuldoss Prashanth;Jürgen Eckert |
| 19 |
A novel approach to direct preparation of complete lath martensite microstructure in tool steel by selective laser melting
|
期刊论文 |
Hongyu Chen;Dongdong Gu;Donghua Dai;Mujian Xia;Chenglong Ma |
| 20 |
On the role of powder flow behavior in fluid thermodynamics and laser processability of Ni-based composites by selective laser melting
|
期刊论文 |
Dongdong Gu;Mujian Xia;Donghua Dai |
| 21 |
一种仿生多功能热防护结构及其成形方法
|
专利 |
林开杰;胡凯明;顾冬冬;袁鲁豪;王皓冉;杨建凯;李鹏宇;陆秋阳;江涛;田昊东;朱立超 |
| 22 |
一种基于红外线辅助预热的激光增材制造热裂纹敏感性材料的制备方法
|
专利 |
席丽霞;顾冬冬;陈龙;冯丽莉;王瑞琪;罗棋;胥紫微 |
| 23 |
一种基于激光3D打印成形的高性能镁基复合材料及其制备方法
|
专利 |
顾冬冬;马成龙;戴冬华;夏木建;陈洪宇;赵轩 |
| 24 |
一种具有多级调温层的高效率热电模块
|
专利 |
高彤;朱继宏;张卫红;高峰;范春辉;穆芷兰;石建雄 |
| 25 |
一种抑制3D打印激光成形铝-铜合金裂纹萌生的方法
|
专利 |
顾冬冬;张晗;曹少霆;陆秋阳;戴冬华 |
| 26 |
一种核壳结构增强改性铝合金材料及其制备方法
|
专利 |
席丽霞;顾冬冬;徐俊灿;耿晓锋 |
| 27 |
Laser energy absorption behavior of powder particles using ray tracing method during selective laser melting additive manufacturing of aluminum alloy
|
期刊论文 |
Ying Yang;Dongdong Gu;Donghua Dai;Chenglong Chen |
| 28 |
High temperature oxidation behavior of laser powder bed fusion printed WC/Inconel 718 composites
|
期刊论文 |
Rui Wang;Dongdong Gu;Hongmei Zhang;Meng Guo |
| 29 |
Laser additive manufacturing of cellular structure with enhanced compressive performance inspired by Al–Si crystalline microstructure
|
期刊论文 |
Jiankai Yang;Dongdong Gu;Kaijie Lin;Libin Wu;Hongmei Zhang;Meng Guo;Luhao Yuan |
| 30 |
Selective laser melting of high strength and toughness stainless steel parts: The roles of laser hatch style and part placement strategy
|
期刊论文 |
Dongdong Gu;Hongyu Chen |
| 31 |
航空航天高性能金属材料构件激光增材制造
|
期刊论文 |
顾冬冬;张红梅;陈洪宇;张晗;席丽霞 |
| 32 |
Anisotropic corrosion resistance of TiC reinforced Ni-based composites fabricated by selective laser melting
|
期刊论文 |
Hongmei Zhang;Dongdong Gu;Lixia Xi;Han Zhang;Mujian Xia;Chenglong Ma |
| 33 |
Fraunhofer-Bessel Research Award
|
奖励 |
顾冬冬 |
| 34 |
2021年度“中国百篇最具影响国内学术论文”,航空航天高性能金属材料构件激光增材制造
|
奖励 |
顾冬冬;张红梅;陈洪宇;张晗;席丽霞 |
| 35 |
中国机械工程学会“2019年度专业特色突出的活动”,举办第五届全国增材制造青年科学家论坛
|
奖励 |
顾冬冬 |
| 36 |
Tailored pore canal characteristics and compressive deformation behavior of bionic porous NiTi shape memory alloy prepared by selective laser melting
|
期刊论文 |
Chenglong Ma;Dongdong Gu;Donghua Dai;Jiankai Yang;Han Zhang;Meng Guo;Rui Wang;Jie Gao;Wei Chen;Yingjie Song |
| 37 |
Laser printing path and its influence on molten pool configuration, microstructure and mechanical properties of laser powder bed fusion processed rare earth element modified Al-Mg alloy
|
期刊论文 |
Han Zhang;Dongdong Gu;Donghua Dai |
| 38 |
Role of laser scan strategies in defect control, microstructural evolution and mechanical properties of steel matrix composites prepared by laser additive manufacturing
|
期刊论文 |
Hongyu Chen;Dongdong Gu;Qing Ge;Xinyu Shi;Hongmei Zhang;Rui Wang;Han Zhang;Konrad Kosiba |
| 39 |
Carbon Nanotubes Enabled Laser 3D Printing of High-Performance Titanium with Highly Concentrated Reinforcement
|
期刊论文 |
Dongdong Gu;Hongyu Chen;Donghua Dai;Chenglong Ma;Han Zhang;Kaijie Lin;Lixia Xi;Tong Zhao;Chen Hong;Andres Gasser;Reinhart Poprawe |
| 40 |
Laser powder bed fusion of node-reinforced hybrid lattice structure inspired by crystal microstructure: Structural feature sensitivity and mechanical performance
|
期刊论文 |
He Liu;Dongdong Gu;Jiankai Yang;Keyu Shi;Luhao Yuan |
| 41 |
Laser additive manufacturing of carbon nanotubes (CNTs) reinforced aluminum matrix nanocomposites: Processing optimization, microstructure evolution and mechanical properties
|
期刊论文 |
Dongdong Gu;Xiangwei Rao;Donghua Dai;Chenglong Ma;Lixia Xi;Kaijie Lin |
| 42 |
Achieving high strength and high ductility in WC-reinforced iron-based composites by laser additive manufacturing
|
期刊论文 |
Hongyu Chen;Dongdong Gu;Konrad Kosiba;Tiwen Lu;Liang Deng;Lixia Xi;Uta Kühn |
| 43 |
In-situ synthesis of aluminum matrix nanocomposites by selective laser melting of carbon nanotubes modified Al-Mg-Sc-Zr alloys
|
期刊论文 |
Lixia Xi;Kai Ding;Han Zhang;Dongdong Gu |
| 44 |
Coaxial powder-feeding nozzle used for additive manufacturing on inner wall and having self-cleaning function
|
专利 |
Dongdong Gu;Xinyu Shi;Yanze Li;Donghua Dai;Qing Ge;Yixuan Sun |
| 45 |
一种预测SLM激光波长对吸收行为影响的模拟方法及装置
|
专利 |
顾冬冬;孙婧佳;郭朦;林开杰 |
| 46 |
一种飞行器翼面结构
|
专利 |
高彤;张卫红;邱雪莹;唐磊;时光辉;全栋梁 |
| 47 |
仿生王莲交错分级式多层级燃料电池双极板流道场结构
|
专利 |
林开杰;顾冬冬;董伟菘;乔竞驰;王超超;张万里 |
| 48 |
Laser additive manufacturing of nano-TiC reinforced Ni-based nanocomposites with tailored microstructure and performance
|
期刊论文 |
Dongdong Gu;Hongmei Zhang;Donghua Dai;Mujian Xia;Chen Hong;Reinhart Poprawe |
| 49 |
Laser additive manufactured high-performance Fe-based composites with unique strengthening structure
|
期刊论文 |
Hongyu Chen;Dongdong Gu;Liang Deng;Tiwen Lu;Uta Kühn;Konrad Kosiba |
| 50 |
Compressive Properties of Bio‐Inspired Reticulated Shell Structures Processed by Selective Laser Melting
|
期刊论文 |
Haoran Wang;Dongdong Gu;Kaijie Lin;Lixia Xi;Luhao Yuan |
| 51 |
一种高密度跨尺度固溶陶瓷增强铝基复合材料及其制备方法
|
专利 |
席丽霞;冯丽莉;顾冬冬 |
| 52 |
一种3D打印稀土改性高强铝合金约束结构的自去除方法
|
专利 |
顾冬冬;张晗;曹少霆;戴冬华;陆秋阳 |
| 53 |
一种无人机及其机翼
|
专利 |
高彤;张卫红;朱继宏;邓可欣;宋龙龙 |
| 54 |
一种用于航天着陆器轻质承载结构的二维叠加波纹梯度夹层结构
|
专利 |
顾冬冬;杨建凯;林开杰;郭朦;张晗;张红梅;戴冬华 |
| 55 |
一种基于激光增材制造的界面强化原位增强铝基复合材料的制备方法
|
专利 |
王瑞琪;顾冬冬;席丽霞;冯丽莉;陶积彪 |
| 56 |
一种燃料电池极板流道磨粒流抛光加工装置及方法
|
专利 |
顾冬冬;林开杰;张万里;陕俊豪;陶积彪 |
| 57 |
一种耐磨损梯度界面复相增强钛合金材料及其制备方法
|
专利 |
席丽霞;顾冬冬;丁凯;曹梦臻;庄杰;郭爽 |
| 58 |
一种仿生无人机机身承载结构
|
专利 |
林开杰;顾冬冬;吴立斌;董伟菘;杨建凯;全景峰;袁鲁豪;石新宇;方亚美 |
| 59 |
一种轻质空间点阵结构
|
专利 |
高彤;张卫红;石建雄;孟亮;范春辉 |
| 60 |
一种纳米多相增强铝基复合材料及其制备方法
|
专利 |
席丽霞;丁凯;顾冬冬 |
| 61 |
一种基于激光束整形的高成形性铝合金材料及其制备方法
|
专利 |
席丽霞;顾冬冬;耿晓锋;徐俊灿;陆秋阳;石珂羽 |
| 62 |
一种复相陶瓷原位协同增强铝基复合材料及其制备方法
|
专利 |
王瑞琪;顾冬冬;席丽霞;陆秋阳;刘泓 |
| 63 |
PEMFC双极板流道截面的优化方法及三维质子交换膜燃料电池
|
专利 |
林开杰;全景峰;顾冬冬;方亚美;董伟菘;乔竞驰;吴立斌;葛庆;庄杰;刘洋 |
| 64 |
第十三届全国激光加工学术会议暨第二届激光复合制造协同创新国际论坛优秀论文奖,选区激光熔化TiC/TiAl基复合材料的显微组织演变与高温氧化行为研究
|
奖励 |
马成龙 |
| 65 |
Laser 3D printed bio-inspired impact resistant structure: failure mechanism under compressive loading
|
期刊论文 |
Jiankai Yang;Dongdong Gu;Kaijie Lin;Chenglong Ma;Rui Wang;Hongmei Zhang;Meng Guo |
| 66 |
Powder preparation during ball milling and laser additive manufacturing of aluminum matrix nanocomposites: Powder properties, processability and mechanical property
|
期刊论文 |
Ruiqi Wang;Lixia Xi;Kai Ding;Bilal Gökce;Stephan Barcikowski;Dongdong Gu |
| 67 |
Preparation method and underlying mechanism of MWCNTs/Ti6Al4V nanocomposite powder for selective laser melting additive manufacturing
|
期刊论文 |
Jie Zhuang;Dongdong Gu;Lixia Xi;Kaijie Lin;Yamei Fang;Rui Wang |
| 68 |
Influence of structural features on processability, microstructures, chemical compositions, and hardness of selective laser melted complex thin-walled components
|
期刊论文 |
Luhao Yuan;Dongdong Gu;Kaijie Lin;Qing Ge;Xinyu Shi;Haoran Wang;Kaiming Hu |
| 69 |
选区激光熔化成形碳纳米管增强铝基复合材料成形机制及力学性能研究
|
期刊论文 |
饶项炜;顾冬冬;席丽霞 |
| 70 |
第六届江苏省“互联网+”大学生创新创业大赛高教主赛道一等奖,3D打印陶瓷颗粒增强铝基复材定制构件引领者
|
奖励 |
袁鲁豪;石新宇;高捷;厉彦泽;王瑞琪;陈威;宋英杰;王锐;陈洪宇;张晗;刘天宇;刘昉 |
| 71 |
Surface wettability and superhydrophobic characteristics of Ni-based nanocomposites fabricated by selective laser melting
|
期刊论文 |
Hongmei Zhang;Dongdong Gu;Chenglong Ma;Mujian Xia;Meng Guo |
| 72 |
Laser additive manufacturing of layered TiB2/Ti6Al4V multi-material parts: Understanding thermal behavior evolution
|
期刊论文 |
Caiyan Chen;Dongdong Gu;Donghua Dai;Lei Du;Rui Wang;Chenglong Ma;Mujian Xia |
| 73 |
Compression performance and mechanism of superimposed sine-wave structures fabricated by selective laser melting
|
期刊论文 |
Dongdong Gu;Jiankai Yang;Kaijie Lin;Chenglong Ma;Luhao Yuan;Hongmei Zhang;Meng Guo;Han Zhang |
| 74 |
Selective laser melting additive manufacturing of cancer pagurus’s claw inspired bionic structures with high strength and toughness
|
期刊论文 |
Chenglong Ma;Dongdong Gu;Kaijie Lin;Donghua Dai;Mujian Xia;Jiankai Yang;Haoran Wang |
| 75 |
Influence of substrate surface morphology on wetting behavior of tracks during selective laser melting of aluminum-based alloys
|
期刊论文 |
Jie Liu;Dongdong Gu;Hongyu Chen;Donghua Dai;Han Zhang |
| 76 |
Selective laser melting of graphene reinforced titanium matrix composites: Powder preparation and its formability
|
期刊论文 |
Kaijie Lin;Yamei Fang;Dongdong Gu;Qing Ge;Jie Zhuang;Lixia Xi |
| 77 |
一种基于机器学习的增材制造记忆合金成形质量预测方法
|
专利 |
林开杰;王超超;顾冬冬;石珂羽;袁鲁豪;乔竞驰;孙建峰 |
| 78 |
Graded lattice energy-absorbing structure, chiral cell thereof having programmable stiffness, and 3D printing method
|
专利 |
Dongdong Gu;Jie Gao;Chenglong Ma;Yingjie Song;Wei Chen |
| 79 |
一种原位激光冲击强化-激光增材制造装置及方法
|
专利 |
林开杰;顾冬冬;田昊东;曹少霆;陆秋阳 |
| 80 |
Interfacial structure and wear properties of selective laser melted Ti/(TiC+TiN) composites with high content of reinforcements
|
期刊论文 |
Lixia Xi;Kai Ding;Dongdong Gu;Shuang Guo;Mengzhen Cao;Jie Zhuang;Kaijie Lin;Ilya Okulov;Baran Sarac;Jürgen Eckert;Konda Gokuldoss Prashanth |
| 81 |
Mechanical properties and deformation behavior under compressive loading of selective laser melting processed bio-inspired sandwich structures
|
期刊论文 |
Kaiming Hu;Kaijie Lin;Dongdong Gu;Jiankai Yang;Haoran Wang;Luhao Yuan |
| 82 |
一种微米银颗粒增强316L不锈钢基复合材料及其制备方法
|
专利 |
林开杰;顾冬冬;全景峰;方亚美;葛庆;庄杰;刘洋;董伟菘;帅朋江 |
| 83 |
一种低元素烧损稀土改性增强铝合金激光3D打印的工艺调控方法
|
专利 |
顾冬冬;马成龙;石齐民;杨建凯;张晗 |
| 84 |
带过渡层的变单胞尺寸梯度点阵结构
|
专利 |
高彤;张卫红;石建雄;孟亮 |
| 85 |
第一届空军“创新杯”科技创新大赛优胜提案奖,轻质高强耐蚀的稀土改性铝合金结构-功能一体化激光增材制造
|
奖励 |
顾冬冬;戴冬华;张晗;李飞;荣鹏 |
| 86 |
Influence of heat treatment on corrosion behavior of rare earth element Sc modified Al-Mg alloy processed by selective laser melting
|
期刊论文 |
Han Zhang;Dongdong Gu;Donghua Dai;Chenglong Ma;Yuxin Li;Mengzhen Cao;Shuhui Li |
| 87 |
From Topology Optimization Design to Additive Manufacturing: Today’s Success and Tomorrow’s Roadmap
|
期刊论文 |
Liang Meng;Weihong Zhang;Dongliang Quan;Guanghui Shi;Lei Tang;Yuliang Hou;Piotr Breitkopf;Jihong Zhu;Tong Gao |
| 88 |
Anisotropic corrosion behavior of Sc and Zr modified Al-Mg alloy produced by selective laser melting
|
期刊论文 |
Dongdong Gu;Han Zhang;Donghua Dai;Chenglong Ma;Hongmei Zhang;Yuxin Li;Shuhui Li |
| 89 |
稀土改性高强铝微桁架激光增材制造工艺调控
|
期刊论文 |
顾冬冬;张晗;刘刚;杨碧琦 |
| 90 |
Selective laser melted TiB2/Ti6Al4V graded materials and first-principle calculations
|
期刊论文 |
Rui Wang;Dongdong Gu;Lixia Xi;Kaijie Lin;Meng Guo;Hongmei Zhang |
| 91 |
Mesoscopic study of thermal behavior, fluid dynamics and surface morphology during selective laser melting of Ti-based composites
|
期刊论文 |
Donghua Dai;Dongdong Gu;Qing Ge;Yanze Li;Xinyu Shi;Yixuan Sun;Shuhui Li |
| 92 |
Effect of Trace Addition of Ceramic on Microstructure Development and Mechanical Properties of Selective Laser Melted AlSi10Mg Alloy
|
期刊论文 |
Yuxin Li;Dongdong Gu;Han Zhang;Lixia Xi |
| 93 |
国家自然科学基金资助项目优秀成果选编(七),激光增材制造铝基纳米复合材料新颖增强结构可控形成及其对力学性能强化机制
|
奖励 |
顾冬冬 |
| 94 |
Mechanisms of laser energy absorption and melting behavior during selective laser melting of titanium-matrix composite: role of ceramic addition
|
期刊论文 |
Qing Ge;Dongdong Gu;Donghua Dai;Chenglong Ma;Yixuan Sun;Xinyu Shi;Yanze Li;Hongmei Zhang;Hongyu Chen |
| 95 |
Grain refinement in laser manufactured Al-based composites with TiB2 ceramic
|
期刊论文 |
Lixia Xi;Dongdong Gu;Shuang Guo;Ruiqi Wang;Kai Ding;Konda Gokuldoss Prashanth |
| 96 |
Laser Additive Manufacturing of Bio-inspired Metallic Structures
|
期刊论文 |
Jiankai Yang;Dongdong Gu;Kaijie Lin;Yicha Zhang;Meng Guo;Luhao Yuan;Han Zhang;Hongmei Zhang |
| 97 |
Laser‐Directed Energy Deposition Additive Manufacturing of Nickel–Titanium Coatings: Deposition Morphology, Microstructures, and Mechanical Properties
|
期刊论文 |
Luhao Yuan;Dongdong Gu;Kaijie Lin;Donghua Dai;Jiankai Yang;Guangjing Huang;Ke Xiong |
| 98 |
Laser powder bed fusion of bio-inspired honeycomb structures: Effect of twist angle on compressive behaviors
|
期刊论文 |
Kaijie Lin;Dongdong Gu;Kaiming Hu;Jiangkai Yang;Haoran Wang;Luhao Yuan;Xinyu Shi;Liang Meng |
| 99 |
Laser powder bed fusion of mechanically efficient helicoidal structure inspired by mantis shrimp
|
期刊论文 |
Jiankai Yang;Dongdong Gu;Kaijie Lin;Luhao Yuan;Meng Guo;Han Zhang;He Liu |
| 100 |
Fragmentation and refinement behavior and underlying thermodynamic mechanism of WC reinforcement during selective laser melting of Ni-based composites
|
期刊论文 |
Mujian Xia;Dongdong Gu;Chenglong Ma;Hongmei Zhang;Donghua Dai;Hongyu Chen;Changpeng Li;Zhongjiao Zhou;Guofeng Chen;Ingomar Kelbassa |
| 101 |
一种直接生成FeN增强相的铁基复合粉末制备方法及设备
|
专利 |
顾冬冬;石齐民;曹赛男 |
| 102 |
一种仿生散热器散热片结构
|
专利 |
林开杰;王超超;顾冬冬;乔竞驰;孙建峰 |
| 103 |
一种仿生马鞍形单元及其衍生构成的点阵结构
|
专利 |
顾冬冬;孙建峰;林开杰;杨建凯;袁鲁豪;王超超;乔竞驰 |
| 104 |
压致扭转仿石墨烯点阵结构及其3D打印方法
|
专利 |
林开杰;顾冬冬;武志远;袁鲁豪;何泰安;黄名威;吴金泽 |
| 105 |
原位自热效应辅助3D打印成形TiAl复杂金属构件的装置及其方法
|
专利 |
戴冬华;赵文泰;顾冬冬;龙宇航;石新宇 |
| 106 |
一种基于相变尺寸效应自动调控激光加工成形精度的方法
|
专利 |
顾冬冬;陈洪宇;戴冬华;马成龙;夏木建 |
| 107 |
一种具有相变储能层的多级热电模块
|
专利 |
高彤;朱继宏;张卫红;高峰;范春辉;穆芷兰;石建雄;何莹斌 |
| 108 |
一种高强铝基材料选区激光熔化成形铺粉系统及其控制方法
|
专利 |
顾冬冬;杨建凯;林开杰;郭朦;张晗;张红梅;戴冬华 |
| 109 |
具有自净功能的内壁增材制造同轴送粉喷嘴
|
专利 |
顾冬冬;石新宇;历彦泽;戴冬华;葛庆;孙宜璇 |
| 110 |
Thermal behavior and fluid dynamics within molten pool during laser inside additive manufacturing of 316L stainless steel coating on inner surface of steel tube
|
期刊论文 |
Xinyu Shi;Dongdong Gu;Yanze Li;Donghua Dai;Qing Ge;Yixuan Sun;Hongyu Chen |
| 111 |
Additively manufacturing-enabled hierarchical NiTi-based shape memory alloys with high strength and toughness
|
期刊论文 |
Dongdong Gu;Chenglong Ma;Donghua Dai;Jiankai Yang;Kaijie Lin;Hongmei Zhang;Han Zhang |
| 112 |
An all-movable rudder designed by thermo-elastic topology optimization and manufactured by additive manufacturing
|
期刊论文 |
Longlong Song;Tong Gao;Lei Tang;Xinxin Du;Jihong Zhu;Ye Lin;Guanghui Shi;Hui Liu;Guannan Zhou;Weihong Zhang |
| 113 |
Relation of thermal behavior and microstructure evolution during multi-track laser melting deposition of Ni-based material
|
期刊论文 |
Lei Du;Dongdong Gu;Donghua Dai;Qimin Shi;Chenglong Ma;Mujian Xia |
| 114 |
Mercator Fellow奖
|
奖励 |
顾冬冬 |
| 115 |
Laser Additive Manufacturing of Metallic Materials and Components
|
专著 |
Dongdong Gu |
| 116 |
Laser powder bed fusion of bio-inspired reticulated shell structure: Optimization mechanisms of structure, process, and compressive property
|
期刊论文 |
Dongdong Gu;Jiankai Yang;Haoran Wang;Kaijie Lin;Luhao Yuan;Kaiming Hu;Libin Wu |
| 117 |
Influence of laser parameters and complex structural features on the bio-inspired complex thin-wall structures fabricated by selective laser melting
|
期刊论文 |
Kaijie Lin;Luhao Yuan;Dongdong Gu |
| 118 |
Topology optimization of nonlinear heat conduction problems involving large temperature gradient
|
期刊论文 |
Lei Tang;Tong Gao;Longlong Song;Liang Meng;Chengqi Zhang;Weihong Zhang |
| 119 |
Compressive mechanical properties and shape memory effect of NiTi gradient lattice structures fabricated by laser powder bed fusion
|
期刊论文 |
Wei Chen;Dongdong Gu;Jiankai Yang;Qin Yang;Jie Chen;Xianfeng Shen |
| 120 |
Formation mechanisms of TiB2 tracks on Ti6Al4V alloy during selective laser melting of ceramic-metal multi-material
|
期刊论文 |
Rui Wang;Dongdong Gu;Caiyan Chen;Donghua Dai;Chenglong Ma;Hongmei Zhang |
| 121 |
激光增材制造成形系统、激光增材制造成形性的调控方法
|
专利 |
顾冬冬;曹少霆;张晗;林开杰;戴冬华;陆秋阳 |
| 122 |
基于可编程刚度的手性胞元构建的梯度点阵吸能结构及其3D打印方法
|
专利 |
顾冬冬;高捷;马成龙;宋英杰;陈威 |
| 123 |
澳洲增材制造数字孪生国际会议(Symposium ‘Towards a True Digital Twin’)青年科研人员报告竞赛奖一等奖
|
奖励 |
张红梅 |
| 124 |
Length scale control in density-based multi-material topology optimization
|
期刊论文 |
Longlong Song;Jian Zhao;Tong Gao;Jiajia Li;Lei Tang;Yang Li;Weihong Zhang |
| 125 |
一种基于超声处理辅助激光3D打印纳米粒子修饰Al-Cu合金的晶粒细化方法
|
专利 |
席丽霞;陆秋阳;顾冬冬 |
| 126 |
带过渡层的变单胞尺寸对金字塔梯度点阵结构
|
专利 |
高彤;张卫红;石建雄;孟亮 |
| 127 |
一种用于航天着陆器足垫的轻质高强仿圆筛藻多层级支撑结构
|
专利 |
顾冬冬;孙建峰;林开杰;王骞;宋玉越 |
| 128 |
一种燃料电池双极板仿生轻量化夹芯结构
|
专利 |
林开杰;顾冬冬;许勇;张万里;陕俊豪 |
| 129 |
激光增材制造复杂金属构件的无支撑成形方法及其多自由度平台装置
|
专利 |
戴冬华;赵文泰;俞皓捷;顾冬冬;龙宇航;历彦泽;石新宇 |
