| 1 |
Shakedown based model for high-cycle fatigue of shape memory alloys
|
期刊论文 |
Gu Xiaojun;Moumni Ziad;Zaki Wael;Zhang Weihong |
| 2 |
Experimental and theoretical investigation of the frequency effect on low cycle fatigue of shape memory alloys
|
期刊论文 |
Zhang Yahui;You Yajun;Moumni Ziad;Anlas Gunay;Zhu Jihong;Zhang Weihong |
| 3 |
Effect of thermomechanical coupling on stress-induced martensitic transformation around the crack tip of edge cracked shape memory alloy
|
期刊论文 |
You Yajun;Gu Xiaojun;Zhang Yahui;Moumni Ziad;Anlas Gunay;Zhang Weihong |
| 4 |
Shape optimization of Dirichlet boundaries based on weighted B-spline finite cell method and level-set function
|
期刊论文 |
Zhang WH;Zhao LY;Cai SY |
| 5 |
基于多点自由度约束的方向性保形拓扑优化设计方法
|
期刊论文 |
朱继宏;王林;李昱;张卫红 |
| 6 |
Experimentation and Modeling of the Tension Behavior of Polycarbonate at High Strain Rates
|
期刊论文 |
Xu Yingjie;Gao Tenglong;Wang Jun;Zhang Weihong |
| 7 |
Identification of milling process damping using operational modal analysis
|
期刊论文 |
Wan Min;Feng Jia;Ma Ying Chao;Zhang Wei Hong |
| 8 |
Improved inverse filter for the correction of distorted measured cutting forces
|
期刊论文 |
Wan Min;Yin Wei;Zhang Wei Hong;Liu Hui |
| 9 |
Processing-Induced Inhomogeneity of Yield Stress in Polycarbonate Product and Its Influence on the Impact Behavior
|
期刊论文 |
Xu Yingjie;Lu Huan;Gao Tenglong;Zhang Weihong |
| 10 |
Integrated layout and topology optimization design of multi-frame and multi-component fuselage structure systems
|
期刊论文 |
Zhu Ji Hong;Guo Wen Jie;Zhang Wei Hong;Liu Tao |
| 11 |
固定网格中基于边界描述的CAD模型快速分析方法
|
期刊论文 |
李心耀;张卫红;陈亮 |
| 12 |
面向压电智能结构精确变形的协同优化设计方法
|
期刊论文 |
吴曼乔;朱继宏;杨开科;张卫红 |
| 13 |
A moving bounds strategy for the parameterization of geometric design variables in the simultaneous shape optimization of curved shell structures and openings
|
期刊论文 |
Wang Dan;Zhang Weihong;Zhu Jihong |
| 14 |
An improved method for tool point dynamics analysis using a bi-distributed joint interface model
|
期刊论文 |
Yang Yun;Wan Min;Ma Ying Chao;Zhang Wei Hong |
| 15 |
Structural topology optimization under rotating load
|
期刊论文 |
Liu Hu;Zhang Weihong;Gao Tong |
| 16 |
Optimization and improvement of stable processing condition by attaching additional masses for milling of thin-walled workpiece
|
期刊论文 |
Wan Min;Dang Xue-Bin;Zhang Wei-Hong;Yang Yun |
| 17 |
一种基于支反力方差约束的机床底座拓扑优化设计方法
|
专利 |
高彤;邱利彬;赵志光;张卫红 |
| 18 |
基于梯度微结构的材料/结构一体化设计方法
|
专利 |
王创;朱继宏;侯杰;张卫红;李韶英 |
| 19 |
弱刚度构件切削的工艺力学理论与方法
|
奖励 |
张卫红;万敏;李阳;高彤;杨昀;马颖超;秦国华 |
| 20 |
A novel thermo-tunable band-stop filter employing a conductive rubber split-ring resonator
|
期刊论文 |
Qiu Kepeng;Jin Jianqiang;Liu Zijun;Zhang Fuli;Zhang Weihong |
| 21 |
Energy-based fatigue model for shape memory alloys including thermomechanical coupling
|
期刊论文 |
Zhang Yahui;Zhu Jihong;Moumni Ziad;Van Herpen Alain;Zhang Weihong |
| 22 |
Stiffeners layout design of thin-walled structures with constraints on multi-fastener joint loads
|
期刊论文 |
Hou Jie;Zhu Jihong;He Fei;Zhang Weihong;Guo Wenjie |
| 23 |
Exact imposition of inhomogeneous Dirichlet boundary conditions based on weighted finite cell method and level-set function
|
期刊论文 |
Zhang Weihong;Zhao Linying |
| 24 |
CBS-based topology optimization including design-dependent body loads
|
期刊论文 |
Zhang Weihong;Zhao Linying;Gao Tong |
| 25 |
Structural topology optimization under harmonic base acceleration excitations
|
期刊论文 |
Zhu Ji-Hong;He Fei;Liu Tao;Zhang Wei-Hong;Liu Qinglin;Yang Chong |
| 26 |
A thermomechanically coupled finite deformation constitutive model for shape memory alloys based on Hencky strain
|
期刊论文 |
Wang Jun;Moumni Ziad;Zhang Weihong;Zaki Wael |
| 27 |
Topology Optimization in Aircraft and Aerospace Structures Design
|
期刊论文 |
Zhu Ji Hong;Zhang Wei Hong;Xia Liang |
| 28 |
薄壁件铣削变形误差预测方法
|
专利 |
张卫红;万敏;党学斌;马颖超;其他发明人请求不公开姓名 |
| 29 |
一种飞行器翼面结构
|
专利 |
高彤;张卫红;邱雪莹;唐磊;时光辉;全栋梁 |
| 30 |
基于机床主轴刀柄刀具模态耦合技术的切削力测量方法
|
专利 |
张卫红;万敏;原恒;殷伟 |
| 31 |
Effect of the thermomechanical coupling on fatigue crack propagation in NiTi shape memory alloys
|
期刊论文 |
You Yajun;Zhang Yahui;Moumni Ziad;Anlas Gunay;Zhang Weihong |
| 32 |
机械结构系统的整体式构型设计理论与方法研究
|
奖励 |
张卫红;朱继宏;高彤;王栋;许英杰 |
| 33 |
Topology optimization of thermo-elastic structures with multiple materials under mass constraint
|
期刊论文 |
Gao Tong;Xu Pengli;Zhang Weihong |
| 34 |
A comparative study of dynamic analysis methods for structural topology optimization under harmonic force excitations
|
期刊论文 |
Liu H;Zhang WH;Gao T |
| 35 |
Degradation of the recoverable strain during stress controlled full transformation cycling in NiTi shape memory alloys
|
期刊论文 |
Zhang Yahui;Li Weichen;Moumni Ziad;Zhu Jihong;Zhang Weihong;Zhong Sheng Yi |
| 36 |
Theoretical prediction of machining-induced residual stresses in three-dimensional oblique milling processes
|
期刊论文 |
Wan Min;Ye Xiang-Yu;Yang Yun;Zhang Wei-Hong |
| 37 |
An extended thermomechanically coupled 3D rate-dependent model for pseudoelastic SMAs under cyclic loading
|
期刊论文 |
Gu Xiaojun;Zhang Weihong;Zaki Wael;Moumni Ziad |
| 38 |
A linear relaxation model for shape optimization of constrained contact force problem
|
期刊论文 |
Zhang Weihong;Niu Cao |
| 39 |
Study of static and dynamic ploughing mechanisms by establishing generalized model with static milling forces
|
期刊论文 |
Wan Min;Ma Ying Chao;Feng Jia;Zhang Wei Hong |
| 40 |
An improved adaptive constraint aggregation for integrated layout and topology optimization
|
期刊论文 |
Gao Huan-Huan;Zhu Ji-Hong;Zhang Wei-Hong;Zhou Ying |
| 41 |
Topology optimization in engineering structure design
|
专著 |
Weihong Zhang;Jihong Zhu;Tong Gao |
| 42 |
A 3D finite-strain-based constitutive model for shape memory alloys accounting for thermomechanical coupling and martensite reorientation
|
期刊论文 |
Wang Jun;Moumni Ziad;Zhang Weihong;Xu Yingjie;Zaki Wael |
| 43 |
Electrically reconfigurable split ring resonator covered by nematic liquid crystal droplet
|
期刊论文 |
Qiu Kepeng;Jia Ning;Liu Zijun;Wu Chen;Fan Yuancheng;Fu Quanhong;Zhang Fuli;Zhang Weihong |
| 44 |
基于几何非线性的钉载灵敏度的梁结构拓扑优化方法
|
专利 |
王杰;朱继宏;侯杰;张卫红;曹吟锋 |
| 45 |
基于几何非线性的载荷可控传递结构拓扑优化方法
|
专利 |
朱继宏;曹吟锋;候杰;王杰;张卫红 |
| 46 |
基于大质量法的简谐加速度激励下结构拓扑优化设计方法
|
专利 |
朱继宏;何飞;刘虎;张卫红;杨开科;谷小军 |
| 47 |
Topology optimization of continuum structures subjected to the variance constraint of reaction forces
|
期刊论文 |
Gao Tong;Qiu Libin;Zhang Weihong |
| 48 |
Numerical simulation of pseudoelastic shape memory alloys using the large time increment method
|
期刊论文 |
Gu Xiaojun;Zhang Weihong;Zaki Wael;Moumni Ziad |
| 49 |
Effect of the amplitude of the training stress on the fatigue lifetime of NiTi shape memory alloys
|
期刊论文 |
Zhang Yahui;Moumni Ziad;Zhu Jihong;Zhang Weihong |
| 50 |
Topology optimization of large-scale structures subjected to stationary random excitation: An efficient optimization procedure integrating pseudo excitation method and mode acceleration method
|
期刊论文 |
Zhang WH;Liu H;Gao T |
| 51 |
Unification of parametric and implicit methods for shape sensitivity analysis and optimization with fixed mesh
|
期刊论文 |
Zhang Weihong;Huang Qiangqiang |
| 52 |
Mechanics of tapping process with emphasis on measurement of feed error and estimation of its induced indentation forces
|
期刊论文 |
Wan Min;Ma Ying Chao;Feng Jia;Zhang Wei Hong |
| 53 |
Industry-oriented method for measuring the cutting forces based on the deflections of tool shank
|
期刊论文 |
Wan Min;Yuan Heng;Fen Jia;Zhang Wei Hong;Yin Wei |
| 54 |
Note on spatial gradient operators and gradient-based minimum length constraints in SIMP topology optimization
|
期刊论文 |
Yang Kaike;Fernandez Eduardo;Niu Cao;Duysinx Pierre;Zhu Jihong;Zhang Weihong |
| 55 |
A thermomechanically coupled finite-strain constitutive model for cyclic pseudoelasticity of polycrystalline shape memory alloys
|
期刊论文 |
Wang Jun;Moumni Ziad;Zhang Weihong |
| 56 |
On the Topology Optimization of Elastic Supporting Structures under Thermomechanical Loads
|
期刊论文 |
Hou Jie;Zhu Ji Hong;Li Qing |
| 57 |
Working mechanism of helix angle on peak cutting forces together with its design theory for peripheral milling tools
|
期刊论文 |
Wan Min;Feng Jia;Zhang Wei Hong;Yang Yun;Ma Ying Chao |
| 58 |
Topology optimization with closed B-splines and Boolean operations
|
期刊论文 |
Zhang Weihong;Zhao Linying;Gao Tong;Cai Shouyu |
| 59 |
面向增材制造的飞行器结构优化设计关键问题
|
期刊论文 |
朱继宏;何飞;张卫红 |
| 60 |
部件级多组件结构系统的整体式拓扑布局优化
|
期刊论文 |
张卫红;郭文杰;朱继宏 |
| 61 |
Topology optimization of self-supporting structures with polygon features for additive manufacturing
|
期刊论文 |
Zhang Weihong;Zhou Lu |
| 62 |
基于工作模态分析的铣削过程阻尼标定方法
|
专利 |
万敏;冯佳;张卫红;马颖超;杨昀 |
| 63 |
一种具有多级调温层的高效率热电模块
|
专利 |
高彤;朱继宏;张卫红;高峰;范春辉;穆芷兰;石建雄 |
| 64 |
基于多点约束的方向性保形拓扑优化设计方法
|
专利 |
王林;朱继宏;李昱;张卫红 |
| 65 |
基于最小切削力峰值的铣刀螺旋角设计方法
|
专利 |
张卫红;万敏;冯佳;马颖超 |
| 66 |
考虑大变形精确形状控制的细长悬臂梁结构拓扑优化设计方法
|
专利 |
杨开科;朱继宏;吴曼乔;侯杰;张卫红 |
| 67 |
A damage-based elastic-viscoplastic constitutive model for amorphous glassy polycarbonate polymers
|
期刊论文 |
Wang Jun;Xu Yingjie;Zhang Weihong;Moumni Ziad |
| 68 |
Feature-driven topology optimization method with signed distance function
|
期刊论文 |
Zhou Ying;Zhang Weihong;Zhu Jihong;Xu Zhao |
| 69 |
Identification of position independent geometric errors of rotary axes for five-axis machine tools with structural restrictions
|
期刊论文 |
Liu Yang;Wan Min;Xing Wan-Jing;Zhang Wei-Hong |
| 70 |
Microstructural defects induced by stereolithography and related compressive behaviour of polymers
|
期刊论文 |
Liu Tao;Guessasma Sofiane;Zhu Jihong;Zhang Weihong;Nouri Hedi;Belhabib Sofiane |
| 71 |
Topology optimization of continuum structures for the uniformity of contact pressures
|
期刊论文 |
Niu Cao;Zhang Weihong;Gao Tong |
| 72 |
简谐力激励下多组件结构系统的整体优化设计
|
期刊论文 |
朱继宏;赵华;刘涛;张卫红 |
| 73 |
简谐力激励下多组件结构系统的整体优化设计
|
期刊论文 |
朱继宏;赵华;刘涛;张卫红 |
| 74 |
Optimization of injection molding process parameters to improve the mechanical performance of polymer product against impact
|
期刊论文 |
Xu Yingjie;Zhang QingWen;Zhang Weihong;Zhang Pan |
| 75 |
Analysis of microstructure and mechanical performance of polymeric cellular structures designed using stereolithography
|
期刊论文 |
Guessasma Sofiane;Tao Liu;Belhabib Sofiane;Zhu Jihong;Zhang Weihong;Nouri Hedi |
| 76 |
Stress constrained topology optimization with free-form design domains
|
期刊论文 |
Cai SY;Zhang WH |
| 77 |
A new method using double distributed joint interface model for three-dimensional dynamics prediction of spindle-holder-tool system
|
期刊论文 |
Yang Yun;Wan Min;Ma Ying-Chao;Zhang Wei-Hong |
| 78 |
Generalized method for the analysis of bending, torsional and axial receptances of tool–holder–spindle assembly
|
期刊论文 |
Yun Yang;Wei-Hong Zhang;Ying-Chao Ma;Min Wan |
| 79 |
多组件结构系统布局拓扑优化中处理组件干涉约束的惩罚函数方法
|
期刊论文 |
朱继宏;郭文杰;张卫红;何飞 |
| 80 |
Chatter prediction for the peripheral milling of thin-walled workpieces with curved surfaces
|
期刊论文 |
Yang Yun;Zhang Wei Hong;Ma Ying Chao;Wan Min |
| 81 |
A comprehensive study of feature definitions with solids and voids for topology optimization
|
期刊论文 |
Zhang Weihong;Zhou Ying;Zhu Jihong |
| 82 |
Structural topology optimization for directional deformation behavior design with the orthotropic artificial weak element method
|
期刊论文 |
Li Yu;Zhu Ji Hong;Zhang Wei Hong;Wang Lin |
| 83 |
Determination of optimal geometrical parameters of peripheral mills to achieve good process stability
|
期刊论文 |
Wan Min;Yuan Heng;Ma Ying-Chao;Zhang Wei-Hong |
| 84 |
设计相关压力载荷作用下的结构形状拓扑联合优化方法
|
专利 |
张卫红;周莹;朱继宏;徐钊;杨开科 |
| 85 |
基于罚函数的多组件结构系统布局优化设计方法
|
专利 |
朱继宏;郭文杰;谷小军;张卫红 |
| 86 |
Study on the construction mechanism of stability lobes in milling process with multiple modes
|
期刊论文 |
Wan Min;Ma Ying-Chao;Zhang Wei-Hong;Yang Yun |
| 87 |
基于保形约束的悬臂梁结构拓扑优化设计方法
|
专利 |
李昱;朱继宏;张卫红;王林 |
