低成本高强塑镁合金板材的合金设计与异步轧制变形的基础研究
U1610253
2016
E0104.金属结构材料与力学行为
秦高梧
联合基金项目
教授
东北大学
288万元
变形镁合金;异步轧制;合金设计;第一性原理计算
2017-01-01到2020-12-31
- 中英文摘要
- 结题摘要
- 结题报告
- 项目成果
- 项目参与人
查看更多信息请先登录或注册
查看更多信息请先登录或注册
查看更多信息请先登录或注册
| 序号 | 标题 | 类型 | 作者 |
|---|---|---|---|
| 1 | 通过流固耦合加热的轧辊温度场分析 | 期刊论文 | 李洋;马立峰;姜正义;黄志权;林金宝;姬亚峰 |
| 2 | Effects of single-pass large-strain rolling on microstructure and mechanical properties of Mg-Al-Ca alloy sheet | 期刊论文 | Cheng Renshan;Li Man;Du Sen;Pan Hucheng;Liu Yujie;Gao Meiqi;Zhang Xingshuo;Huang Qiuyan;Yang Changlin;Ma Lifeng;Qin Gaowu |
| 3 | Experimental evidence of the Mg-7(Zn, Ag)(3) continuous solid solution in Mg-rich corner of Mg-Zn-Ag ternary system at 335 degrees C | 期刊论文 | Zhao Hong;Yang Bo;Ren Yuping;Qin Gaowu |
| 4 | 固溶处理对挤压态Mg-Zn-Ag合金体外降解速率的影响(英文) | 期刊论文 | 王利卿;秦高梧;孙世能;任玉平;李松 |
| 5 | Development of low-alloyed and rare-earth-free magnesium alloys having ultra-high strength | 期刊论文 | Pan Hucheng;Qin Gaowu;Huang Yunmiao;Ren Yuping;Sha Xuechao;Han Xiaodong;Liu Zhi-Quan;Li Caifu;Wu Xiaolei;Chen Houwen;He Cong;Chai Linjiang;Wang Yunzhi;Nie Jian-feng |
| 6 | Al含量对Mg-Sn-Ca合金微观组织与力学性能的影响 | 期刊论文 | 武华建;程仁山;李景仁;谢东升;宋锴;潘虎成;秦高梧 |
| 7 | Atomic-scale HAADF-STEM characterization of an age-hardenable Mg-Cd-Yb alloy | 期刊论文 | Xie Hongbo;Pan Hucheng;Sun Shineng;Wang Liqing;Zhao Hong;Liu Boshu;Ren Yuping;Qin Gaowu |
| 8 | 一种镁合金薄板轧制边部开裂准则及深度预判方法 | 专利 | 贾伟涛;马立峰;焦明扬;林金宝;黄志权 |
| 9 | 一种半固态镁合金梯度挤压组合模具 | 专利 | 贾伟涛;马立峰;雷军义;邹景锋 |
| 10 | 一种轻稀土元素Ce和Sm强化的低成本变形镁合金及其制备方法 | 专利 | 潘虎成;谢东升;任玉平;谢红波;秦高梧 |
| 11 | 一种用于斜轧穿孔工艺前镁棒的均匀加热及保温装置 | 专利 | 邹景锋;马立峰;朱艳春;刘光明;黄志权;林金保 |
| 12 | 一种半固态镁合金剪切推送装置 | 专利 | 贾伟涛;马立峰;雷军义;王丽娟 |
| 13 | 一种含钆钇稀土元素的高强度Mg-Ca-Mn-Al-Zn系变形镁合金及其制备方法 | 专利 | 潘虎成;谢东升;任玉平;谢红波;秦高梧 |
| 14 | Co-existences of the two types of beta' precipitations in peak-aged Mg-Gd binary alloy | 期刊论文 | Hongbo Xie;Hucheng Pan;Yuping Ren;Shineng Sun;Liqing Wang;Yufeng He;Gaowu Qin |
| 15 | 镁合金温控轧辊的温度场(英文) | 期刊论文 | 李洋;马立峰;姜正义;黄志权;林金宝;姬亚峰 |
| 16 | Effect of extrusion speed on microstructure and mechanical properties of the Mg-Ca binary alloy | 期刊论文 | Jingren Li;Aiyue Zhang;Hucheng Pan;Yuping Ren;Zhuoran Zeng;Qiuyan Huang;Changlin Yang;Lifeng Ma;Gaowu Qin |
| 17 | Effect of solid solution treatment on in vitro degradation rate of as-extruded Mg-Zn-Ag alloys | 期刊论文 | Wang Li-qing;Qin Gao-wu;Sun Shi-neng;Ren Yu-ping;Li Song |
| 18 | Effects of electromagnetic field on physical behaviors during low-frequency electromagnetic casting of Mg alloy AZ31 | 期刊论文 | Xu Shuang;Jia Weitao;Song Zetian |
| 19 | A new rare-earth-free Mg-Sn-Ca-Mn wrought alloy with ultra-high strength and good ductility | 期刊论文 | Zhang Aiyue;Kang Rui;Wu Lu;Pan Hucheng;Xie Hongbo;Huang Qiuyan;Liu Yujie;Ai Zhengrong;Ma Lifeng;Ren Yuping;Qin Gaowu |
| 20 | 一种半固态镁合金梯度冷却密封装置 | 专利 | 贾伟涛;马立峰;雷军义;毋嘉豪 |
| 21 | 一种含钕钐轻稀土元素及高Mn含量的变形镁合金及其制备方法 | 专利 | 潘虎成;谢东升;任玉平;谢红波;秦高梧 |
| 22 | 一种镁合金板材大应变热轧变形区板温的在线感知方法 | 专利 | 贾伟涛;马立峰;尚田 |
| 23 | Microstructure and mechanical property of multi-pass low-strain rolled Mg-Al-Zn-Mn alloy sheet | 期刊论文 | Jingren Li;Dongsheng Xie;Hansong Yu;Ruolin Liu;Yangzi Shen;Xingshuo Zhang;Changlin Yang;Lifeng Ma;Hucheng Pan;Gaowu Qin |
| 24 | Beneficial effect of low plastic deformation rate on the flatness and residual stress of the magnesium alloy plate straightened at room temperature | 期刊论文 | Wang Rongjun;Zhang Qiang;Zhang Pengchong;Liu Xin;Yuan Shengnan;Ma Lidong;Ma Lifeng |
| 25 | Evidence of a novel intermetallic Mg7Ag3 phase in Mg-Ag binary alloy system | 期刊论文 | Ren Yuping;Zhao Hong;Wang Liqing;Yang Bo;Li Hongxiao;Sun Shineng;Pan Hucheng;Qin Gaowu |
| 26 | Magnesium Alloys Strengthened by Nanosaucer Precipitates with Confined New Topologically Close-Packed Structure | 期刊论文 | Xie Hongbo;Pan Hucheng;Ren Yuping;Sun Shineng;Wang Liqing;Zhao Hong;Liu Boshu;Qi Xixi;Qin Gaowu |
| 27 | 交叉轧制对AZ31B镁合金边部组织及成形性的影响 | 期刊论文 | 支晨琛;马立峰;黄庆学;朱艳春;赵广辉 |
| 28 | Improvement of magnesium alloy edge cracks by multi-cross rolling | 期刊论文 | Zhi Chenchen;Ma Lifeng;Huang Qingxue;Huang Zhiquan;Lin Jinbao |
| 29 | 一种镁合金薄板带温轧-超低温冷轧生产工艺 | 专利 | 马立峰;支晨琛;霍晓娇;贾伟涛;马自勇;朱艳春;黄志权 |
| 30 | 一种Ce和Ca元素协同强化的低成本变形镁合金及其制备方法 | 专利 | 潘虎成;李景仁;任玉平;谢红波;秦高梧 |
| 31 | 一种波纹预轧弱化连续生产镁合金板带基面织构的方法 | 专利 | 支晨琛;马立峰;刘鹏涛;贾伟涛;马自勇;黄志权;朱艳春 |
| 32 | 一种高钙高铝含量的高弹性模量镁基复合材料及制备方法 | 专利 | 潘虎成;秦高梧;李景仁;任玉平;杨延涛;李松;左良 |
| 33 | 一种新型的镁合金铸轧机 | 专利 | 马立峰;李洋;黄志权;王荣军;刘光明;朱彦春;林金保;楚志兵 |
| 34 | Fracture criterion for predicting edge-cracking in Hot rolling of twin-roll casted AZ31 Mg alloy | 期刊论文 | Jia Weitao;Ma Lifeng;Jiao Mingyang;Le Qichi;Han Tingzhuang;Che Chaojie |
| 35 | Re-recognition of the aging precipitation behavior in the Mg-Sm binary alloy | 期刊论文 | Xie Hongbo;Liu Boshu;Bai Junyuan;Guan Changli;Lou Dongfang;Pang Xueyong;Zhao Hong;Li Shanshan;Ren Yuping;Pan Hucheng;Yang Changlin;Qin Gaowu |
| 36 | β-Mg_5Gd平衡相原子尺度的HAADF-STEM表征 | 期刊论文 | 谢红波;潘虎成;任玉平;李洪晓;蒋敏;秦高梧 |
| 37 | Age hardening responses of as-extruded Mg-2.5Sn-1.5Ca alloys with a wide range of Al concentration | 期刊论文 | Huang Qiuyan;Liu Yang;Zhang Aiyue;Jiang Haoxin;Pan Hucheng;Feng Xiaohui;Yang Changlin;Luo Tianjiao;Li Yingju;Yang Yuansheng |
| 38 | A new phenomenological model describing the compressive thermal deformation flow stress of cast-rolled AZ31B Mg alloy | 期刊论文 | Jiao Mingyang;Ma Lifeng;Jia Weitao;Zhu Yanchun;Lin Jinbao;Le Qichi |
| 39 | Ultra-fine grain size and exceptionally high strength in dilute Mg-Ca alloys achieved by conventional one-step extrusion | 期刊论文 | Pan Hucheng;Yang Changlin;Yang Yantao;Dai Yongqiang;Zhou Dengshan;Chai Linjiang;Huang Qiuyan;Yang Qingshan;Liu Shengming;Ren Yuping;Qin Gaowu |
| 40 | Self-Assembly of Two Unit Cells into a Nanodomain Structure Containing Five-Fold Symmetry | 期刊论文 | Xie Hongbo;Pan Hucheng;Ren Yuping;Sun Shineng;Wang Liqing;Zhao Hong;Liu Boshu;Li Song;Qin Gaowu |
| 41 | Zn添加对挤压态Mg-16Gd-xZn合金微观组织的影响 | 期刊论文 | 谢红波;潘虎成;任玉平;李洪晓;蒋敏;秦高梧 |
| 42 | Evolution of microstructure and mechanical properties of AZ31 Mg alloy sheets processed by accumulated extrusion bonding with different relative orientation | 期刊论文 | Han Tingzhuang;Huang Guangsheng;Ma Lifeng;Wang Guangang;Wang Lifei;Pan Fusheng |
| 43 | AZ31镁合金中厚板轧制温度场的数值模拟与实验验证 | 期刊论文 | 李洋;马立峰;姜正义;黄志权;林金宝;姬亚峰 |
| 44 | AZ31B镁合金热变形开裂准则的研究 | 期刊论文 | 赵大可;马立峰;朱艳春 |
| 45 | 高强高塑性Mg-Ca-Al-Zn-Mn-Ce变形镁合金及其制备方法 | 专利 | 潘虎成;秦高梧;杨延涛;任玉平;李景仁;戴永强;左良 |
| 46 | 一种镁合金材料本构关系模型的建立方法 | 专利 | 马立峰;黄庆学;贾伟涛;黄志权;刘光明;楚志兵;蒋亚平 |
| 47 | 一种高Mn含量的Mg-Ca-Mn-Al-Zn系变形镁合金及其制备方法 | 专利 | 潘虎成;谢东升;任玉平;谢红波;秦高梧 |
| 48 | 一种镁合金板材轧制组织性能预测模型的建立方法 | 专利 | 马立峰;徐海洁;刘光明;黄志权;林金保;朱彦春 |
| 49 | 一种高锶高铝含量的铸造镁基复合材料及制备方法 | 专利 | 潘虎成;秦高梧;李景仁;任玉平;杨延涛;李松;左良 |
| 50 | Hopf bifurcation control for the main drive delay system of rolling mill | 期刊论文 | Wang Jinbin;Ma Lifeng;Wang Yong |
| 51 | Microstructure Evolution and Mechanical Properties of Mg-1.5Zn-0.2Ca-0.2Ce Alloy Processed by Accumulated Extrusion Bonding | 期刊论文 | Han Tingzhuang;Zou Jingfeng;Ma Lifeng;Huang Guangsheng;Che Chaojie;Jia Weitao;Wang Lifei;Pan Fusheng;Zhang Ya |
| 52 | 新型高强度低合金化镁合金研究进展 | 期刊论文 | 程仁山;潘虎成;谢东升;李景仁;谢红波;秦高梧 |
| 53 | Mechanistic investigation of a low-alloy Mg-Ca-based extrusion alloy with high strength-ductility synergy | 期刊论文 | Pan Hucheng;Kang Rui;Li Jingren;Xie Hongbo;Zeng Zhuoran;Huang Qiuyan;Yang Changlin;Ren Yuping;Qin Gaowu |
| 54 | 一类介于晶体与准晶体之间的有序结构 | 期刊论文 | 秦高梧;谢红波;潘虎成;任玉平 |
| 55 | Anomalous crystal structure of -gamma '' phase in the Mg-RE-Zn(Ag) series alloys: Causality clarified by ab initio study | 期刊论文 | Bai Junyuan;Pang Xueyong;Meng Xiangying;Xie Hongbo;Pan Hucheng;Ren Yuping;Jiang Min;Qin Gaowu |
| 56 | New Structured Laves Phase in the Mg-In-Ca System with Nontranslational Symmetry and Two Unit Cells | 期刊论文 | Xie Hongbo;Pan Hucheng;Ren Yuping;Wang Liqing;He Yufeng;Qi Xixi;Qin Gaowu |
| 57 | Dependence of deformation behaviors on temperature for twin-roll casted AZ31 alloy by processing maps | 期刊论文 | Zhi Chenchen;Ma Lifeng;Jia Weitao;Huo Xiaojiao;Fan Qinhong;Huang Zhiquan;Le Qichi;Lin Jinbao |
| 58 | Deformation and fracture behaviors of AZ31B Mg alloy at elevated temperature under uniaxial compression | 期刊论文 | Jia Weitao;Ma Lifeng;Le Qichi;Zhi Chenchen;Liu Pengtao |
| 59 | Self-adapted clustering of solute atoms into a confined two-dimensional prismatic platelet with an ellipse-like quasi-unit cell | 期刊论文 | Xie Hongbo;Bai Junyuan;Pan Hucheng;Pang Xueyong;Ren Yuping;Sun Shineng;Wang Liqing;Zhao Hong;Liu Boshu;Qin Gaowu |
| 60 | 一种铸辊温度分区可调的宽幅镁合金铸轧机 | 专利 | 马立峰;孟月;黄庆学;王荣军;黄志权;刘光明 |
| 61 | 一种镁合金等径角轧制的剪切变形装置 | 专利 | 马立峰;徐传强;黄志权;王清华;孟进礼 |
| 62 | 一种镁合金板材剪切弯曲复合变形的组合模具 | 专利 | 徐传强;马立峰;邹景峰 |
| 63 | 一种含轻稀土元素镧的高强度Mg-Ca-Mn-Al-Zn系变形镁合金及其制备方法 | 专利 | 潘虎成;谢东升;任玉平;谢红波;秦高梧 |
| 64 | 一种镁合金交叉轧制的方法 | 专利 | 姬亚锋;马立峰;段晋芮;刘光明;李华英;胡啸 |
| 65 | 大应变轧制Mg-Al-Sn合金板材的微观组织与力学性能 | 期刊论文 | 莫华均;程仁山;马立峰;林金宝;杨吉顺;潘虎成;任玉平;秦高梧 |
| 66 | Double Hopf Bifurcation in Microbubble Oscillators with Delay Coupling | 期刊论文 | Wang Jinbin;Zhang Rui;Ma Lifeng |
查看更多信息请先登录或注册
