| 1 |
一种聚合物中声速与衰减系数一体化检测方法
|
专利 |
赵朋;夏能;赵耀;张剑锋;黄俊业;傅建中 |
| 2 |
Improving the Consistency of Injection Molding Products by Intelligent Temperature Compensation Control
|
期刊论文 |
Ruan Yufei;Gao Huang;Li Dequn |
| 3 |
Ultrasonic autofocus imaging of internal voids in multilayer polymer composite structures
|
期刊论文 |
Kaipeng Ji;Peng Zhao;Chaojie Zhuo;Mu Chen;Jian Chen;Haoran Jin;Sheng Ye;Jianzhong Fu |
| 4 |
一种聚合物中声速与衰减系数一体化检测方法
|
专利 |
赵朋;夏能;赵耀;张剑锋;黄俊业;傅建中 |
| 5 |
Detecting shrinkage voids in plastic gears using magnetic levitation
|
期刊论文 |
Daofan Tang;Peng Zhao;Yaqiang Shen;Hongwei Zhou;Jun Xie;Jianzhong Fu |
| 6 |
Self-Powered Infrared-Responsive Electronic Skin Employing Piezoelectric Nanofiber Nanocomposites Driven by Microphase Transition
|
期刊论文 |
Li Mei;Wang Yunming;Yu Zhaohan;Fu Yue;Zheng Jiaqi;Liu Yang;Cui Jingqiang;Zhou Huamin;Li Dequn |
| 7 |
高精密高性能塑料注射成形技术及装备
|
奖励 |
周华民;张云;赵朋;李德群;饶启琛;黄志高;丁宏参;王云明;朱秉科;徐尚祥;杜呈表;陆志强;胡迪;徐斌;沈亚强 |
| 8 |
基于磁悬浮装置的塑料零件缺陷检测方法
|
专利 |
赵朋;夏能;颉俊;张承谦;张雪纯;傅建中 |
| 9 |
一种聚合物熔体温度的在线测量方法及装置
|
专利 |
赵朋;张剑锋;纪凯鹏;董正阳;夏能;周宏伟;傅建中 |
| 10 |
注射与注射压缩成形工艺对精密透镜面形偏差及光学畸变影响的对比研究
|
期刊论文 |
周晓伟;李茂源;张 云;周华民 |
| 11 |
Molecular configuration evolution model and simulation for polymer melts using a non-equilibrium irreversible thermodynamics method
|
期刊论文 |
Wenjie Yu;Guancheng Shen;Yun Zhang;Dequn Li;Huamin Zhou |
| 12 |
一种用于制备透明器件的注塑成形方法
|
专利 |
王云明;周华民;胡诗尧;张云;黄志高;李德群;陈丹 |
| 13 |
In situ dielectric characterization of dynamic orientation for polymer molecular chains
|
期刊论文 |
Guancheng Shen;Yi Zhang;Yunming Wang;Wenjie Yu;Zhigao Huang;Maoyuan Li;Yun Zhang;Huamin Zhou |
| 14 |
Trajectory optimization and positioning control for batch process using learning control
|
期刊论文 |
Yufei Ruan;Yun Zhang;Ting Mao;Xundao Zhou;Dequn Li;Huamin Zhou |
| 15 |
Feature extraction and physical interpretation of melt pressure during injection molding process
|
期刊论文 |
Zhou Xundao;Zhang Yun;Mao Ting;Ruan Yufei;Gao Huang;Zhou Huamin |
| 16 |
A Constitutive Model Describing Molecular Configuration Evolution and Transient Rheological Behavior of Entangled Polymer Solutions
|
期刊论文 |
WenJie Yu;GuanCheng Shen;XiaoWei Zhou;MaoYuan Li;Yun Zhang;Huamin Zhou;Dequn Li |
| 17 |
3D Printing of Functional Magnetic Materials: From Design to Applications
|
期刊论文 |
Chengqian Zhang;Xiangjia Li;Laiming Jiang;Daofan Tang;Han Xu;Peng Zhao;Jianzhong Fu;Qifa Zhou;Yong Chen |
| 18 |
一种基于环形悬浮的磁悬浮密度检测方法
|
专利 |
赵朋;张承谦;顾复;张雪纯;颉俊;傅建中 |
| 19 |
碳纤维增强塑料的纤维取向介电测量方法
|
期刊论文 |
叶庆莹;张逸;沈关成;王云明;张云;周华民 |
| 20 |
Thermoplastic biomass transparent films directly fabricated by chitosan nanospheres
|
期刊论文 |
Sun Shuang;Wang Yunming;Li Longhui;Huang Zhigao;Zhou Huamin |
| 21 |
通过超声波手段间接测量注塑机型腔压力的方法及装置
|
专利 |
赵朋;张剑锋;赵耀;顾复;黄俊业;夏能;傅建中 |
| 22 |
Three-dimensional numerical simulation for plastic injection-compression molding
|
期刊论文 |
Zhang Yun;Yu Wenjie;Liang Junjie;Lang Jianlin;Li Dequn |
| 23 |
非等温高剪切聚合物注射成形的超声波原位表征装置
|
专利 |
赵朋;张剑锋;赵耀;夏能;傅建中 |
| 24 |
Separation of mixed waste plastics via magnetic levitation
|
期刊论文 |
Zhao Peng;Xie Jun;Gu Fu;Sharmin Nusrat;Hall Philip;Fu Jianzhong |
| 25 |
一种基于光子晶体高弹态法制备高质量透明制件的成形方法
|
专利 |
王云明;胡诗尧;周华民;张云;黄志高;李德群;周孟源 |
| 26 |
In-situ ultrasonic measurement of molten polymers during injection molding
|
期刊论文 |
Zhao Peng;Ji Kaipeng;Zhang Jianfeng;Chen Yuhong;Dong Zhengyang;Zheng Jianguo;Fu Jianzhong |
| 27 |
Intelligent methods for the process parameter determination of plastic injection molding
|
期刊论文 |
Huang Gao;Yun Zhang;Xundao Zhou;Dequn Li |
| 28 |
Experimental investigation and modeling study of the fiber orientation behavior
|
期刊论文 |
Maoyuan Li;Yun Zhang;Shi Zhang;Binkui Hou;Huamin Zhou |
| 29 |
Electrospinning of Nanofibrous Membrane and Its Applications in Air Filtration: A Review
|
期刊论文 |
Chenxin Lyu;Peng Zhao;Jun Xie;Shuyuan Dong;Jiawei Liu;Chengchen Rao;Jianzhong Fu |
| 30 |
一种基于分类模型的注塑工艺参数优化方法
|
期刊论文 |
胡雷;高煌;李阳;张云;周华民 |
| 31 |
Evaluation of polymer injection molded parts via density-based magnetic levitation
|
期刊论文 |
Peng Zhao;Jun Xie;Jianfeng Zhang;Chengqian Zhang;Neng Xia;Jianzhong Fu |
| 32 |
智能注射成形中工艺参数的多目标自学习优化
|
期刊论文 |
赵朋;董正阳;冯伟;周宏伟;傅建中 |
| 33 |
A reinforcement learning decision model for online process parameters optimization from offline data in injection molding
|
期刊论文 |
Fei Guo;Xiaowei Zhou;Jiahuan Liu;Yun Zhang;Dequn Li;Huamin Zhou |
| 34 |
Using magneto-archimedes levitation for Non-invasive characterization of injection molded parts
|
会议论文 |
Peng Zhao;Neng Xia;Jun Xie;Chengqian Zhang;Jianzhong Fu;Lih-Sheng Turng |
| 35 |
通过超声波手段间接测量注塑机型腔压力的方法及装置
|
专利 |
赵朋;张剑锋;赵耀;顾复;黄俊业;夏能;傅建中 |
| 36 |
一种顺序焊接制造厚壁透明塑料制件的方法
|
专利 |
周华民;周晓伟;张云;郭飞;邓天正雄;黄志高 |
| 37 |
Ultrasonic measurement of the tie-bar stress for die-casting machine
|
期刊论文 |
Chaojie Zhuo;Peng Zhao;Kaipeng Ji;Jun Xie;Sheng Ye;Peng Cheng;Jianzhong Fu |
| 38 |
基于磁悬浮的零件缺陷的检测装置和检测方法
|
专利 |
赵朋;颉俊;傅建中;贺永 |
| 39 |
Magnetic Flexible Tactile Sensor via Direct Ink Writing
|
期刊论文 |
Xuechun Zhang;Hao Hu;Daofan Tang;Chengqian Zhang;Jianzhong Fu;Peng Zhao |
| 40 |
一种光学制件均匀性干涉检测方法
|
专利 |
周华民;周晓伟;张云;余文劼;李茂源;邓天正雄;黄志高 |
| 41 |
碳纤维取向的原位介电测量
|
会议论文 |
沈关成;余文劼;李茂源;王云明;张云;周华民 |
| 42 |
An imaging performance analysis method correlated with geometrical deviation for the injection molded high-precision aspheric negative plastic lens
|
期刊论文 |
Xiaowei Zhou;Yun Zhang;Wenjie Yu;Maoyuan Li;Yuhong Chen;Huamin Zhou |
| 43 |
Feature learning and process monitoring of injection molding using convolution-deconvolution auto encoders
|
期刊论文 |
Mao Ting;Zhang Yun;Ruan Yufei;Gao Huang;Zhou Huamin;Li Dequn |
| 44 |
Magnetic levitation for polymer testing using magnet array
|
期刊论文 |
Peng Zhao;Yuhan Jia;Jun Xie;Tingyu Wang;Chenqian Zhang;Jianzhong Fu |
| 45 |
Current State of Magnetic Levitation and Its Applications in Polymers: A Review
|
期刊论文 |
Jun Xie;Peng Zhao;Chengqian Zhang;Jianzhong Fu;Lih-Sheng Turng |
| 46 |
聚合物成形过程中分子取向与双折射的预测与调控
|
会议论文 |
余文劼;沈关成;李茂源;张云;周华民;李德群 |
| 47 |
Origami-inspired magnetic-driven soft actuators with programmable designs and multiple application
|
期刊论文 |
Daofan Tang;Chengqian Zhang;Haonan Sun;Huangzhe Dai;Jun Xie;Jianzhong Fu;Peng Zhao |
| 48 |
Cavity pressure measurement during injection molding via ultrasonic technology
|
会议论文 |
Peng Zhao;Jianfeng Zhang |
| 49 |
An efficient coupled pressure-velocity solver for three-dimensional injection molding simulation using Schur complement preconditioned FGMRES
|
期刊论文 |
Xiang Liu;Fei Guo;Yun Zhang;Junjie Liang;Dequn Li;Huamin Zhou |
| 50 |
一种基于叉指电极的高分子层内剪切取向测量方法
|
专利 |
周华民;叶庆莹;张云;黄志高;张逸;李德群;王云明 |
| 51 |
一种基于叉指电极的高分子溶液分散性测量方法
|
专利 |
王云明;叶庆莹;周华民;张云;黄志高;张逸 |
| 52 |
Atomistic molecular dynamic simulations of the thermal transport across h-BN/cellulose nanocrystal interface
|
期刊论文 |
Maoyuan Li;Jiahuan Liu;Wenjie Yu;Yun Zhang;Huamin Zhou |
| 53 |
Quality monitoring and stability control in injection molding process
|
会议论文 |
Xundao Zhou;Yun Zhang;Ting Mao |
| 54 |
抗磁性高密度物质的磁悬浮密度测量方法
|
期刊论文 |
张承谦;赵朋;颉俊;夏能;傅建中 |
| 55 |
一种用于制备透明器件的注塑成形方法
|
专利 |
王云明;周华民;张云;黄志高;李德群;陈丹;符岳 |
| 56 |
Process parameters optimization using a novel classification model for plastic injection molding
|
期刊论文 |
Gao Huang;Zhang Yun;Fu Yang;Mao Ting;Zhou Huamin;Li Dequn |
| 57 |
An accurate and versatile density measurement device: Magnetic Levitation
|
期刊论文 |
Jun Xie;Chengqian Zhang;Fu Gu;Yunming Wang;Jianzhong Fu;Peng Zhao |
| 58 |
基于磁悬浮装置的塑料零件缺陷检测方法
|
专利 |
赵朋;夏能;颉俊;张承谦;张雪纯;傅建中 |
| 59 |
塑料注射成形过程形性智能调控技术及装备
|
奖励 |
周华民;张云;赵朋;李德群;陈宇宏;黄志高;饶启琛;徐斌;沈亚强;汪智勇 |
| 60 |
Prediction of birefringence for polymer optical products based on a novel molecular chain orientation model
|
期刊论文 |
Wenjie Yu;Ning Xiang;Maoyuan Li;Guancheng Shen;Xiaowei Zhou;Zhigao Huang;Yun Zhang;Huamin Zhou;Dequn Li |
| 61 |
基于响应面模型和灰关联分析的保压曲线优化
|
期刊论文 |
胥泽林;李阳;高煌;张云;黄志高 |
| 62 |
用于测量聚合物成型过程中分子取向的装置及测量方法
|
专利 |
周华民;王云明;张云;沈关成;李茂源;余文劼;周晓伟 |
| 63 |
一种共面电容式聚合物分子取向测量装置及方法
|
专利 |
张云;李德群;周华民;黄志高;王云明;张逸;叶庆莹 |
| 64 |
Characterization of Polymer Pellets in Injection Molding Using Magnetic Levitation
|
会议论文 |
Peng Zhao;Jun Xie;Jianfeng Zhang;Jianzhong Fu;Lih-Sheng Turng |
| 65 |
一种基于波前传感器的光学制件均匀性检测装置与方法
|
专利 |
周华民;周晓伟;张云;李茂源;余文劼;黄志高 |
| 66 |
一种多层结构空洞缺陷超声自聚焦检测方法
|
专利 |
赵朋;纪凯鹏;颉俊;卓超杰;陈剑;叶盛;周宏伟;傅建中 |
| 67 |
一种共面电容式聚合物分子取向测量装置及方法
|
专利 |
张云;李德群;周华民;黄志高;王云明;张逸;叶庆莹 |
| 68 |
Intelligent Injection Molding: Parameters Self-learning Optimization Using Iterative Gradient-approximation Adaptive Method
|
期刊论文 |
Zhengyang Dong;Peng Zhao;Jianguo Zheng;Kaipeng Ji;Yuhong Chen;Jianzhong Fu |
| 69 |
用于检测密度的磁悬浮检测方法
|
专利 |
赵朋;颉俊;张承谦;傅建中 |
| 70 |
注射成型中聚合物剪切诱导结晶行为的三维模拟
|
期刊论文 |
赵朋;赵耀;严波;汪晓蔓;卢圣坤;傅建中 |
| 71 |
An effective retrieval method for 3D models in plastic injection molding for process reuse
|
期刊论文 |
Fei Guo;Jiahuan Liu;Xiaowei Zhou;Hui Wang;Yun Zhang;Dequn Li;Huamin Zhou |
| 72 |
一种基于超声纵波的聚合物取向度表征方法
|
专利 |
赵朋;夏能;赵耀;张剑锋;黄俊业;傅建中 |
| 73 |
一种基于响应空间一致分布的初始化方法
|
专利 |
赵朋;纪凯鹏;颉俊;董正阳;叶盛;郑建国;傅建中 |
| 74 |
注塑机拉杆健康状态的超声波检测装置及注塑机系统
|
专利 |
赵朋;赵耀;张剑锋;夏能;黄俊业;傅建中 |
| 75 |
一种基于超声纵波的聚合物取向度表征方法
|
专利 |
赵朋;夏能;赵耀;张剑锋;黄俊业;傅建中 |
| 76 |
Monitoring and dynamic control of quality stability for injection molding process
|
期刊论文 |
Zhou Xundao;Zhang Yun;Mao Ting;Zhou Huamin |
| 77 |
一种注射成形工艺参数无模型优化方法
|
专利 |
赵朋;董正阳;纪凯鹏;周宏伟;郑建国;王庭瑜;傅建中 |
| 78 |
Automatic Magnetic Projection for One-step Separation of Mixed Plastics using Ring Magnets
|
期刊论文 |
Xuechun Zhang;Weitong Zhang;Jun Xie;Chengqian Zhang;Jue Fu;Jianzhong Fu;Peng Zhao |
| 79 |
抗磁性物质的磁悬浮仿真及密度测量
|
期刊论文 |
夏能;颉俊;张承谦;赵朋;傅建中 |
| 80 |
一种用于制备交联高分子聚合物材料的成形加工方法;申请;201
|
专利 |
王云明;黄志高;张云;陈丹;周华民;李德群 |
| 81 |
A Concise TSK Fuzzy Ensemble Classifier Integrating Dropout and Bagging for High-dimensional Problems
|
期刊论文 |
Fei Guo;Jiahuan Liu;Maoyuan Li;Tianlun Huang;Yun Zhang;Dequn Li;Huamin Zhou |
| 82 |
A Novel MagLev-based Separation Approach for Heavy Metal Recycling
|
期刊论文 |
Chengqian Zhang;Daofan Tang;Mingyi Cao;Fu Gu;Xiangyu Cai;Xuetao Liu;Zhaoyu Cheng;Philip Hall;Jianzhong Fu;Peng Zhao |
| 83 |
Real-time characterization of microcellular injection molding via ultrasonic technology
|
会议论文 |
Peng Zhao;Yao Zhao;Hrishikesh Kharbas;Tong Wu;Weimin Yang;Jianzhong Fu;Lih-Sheng Turng |
| 84 |
基于磁悬浮装置的柱形塑料件缩孔缺陷检测方法
|
专利 |
赵朋;唐道梵;沈亚强;郑建国;王庭瑜;颉俊;傅建中 |
