1 |
Co-segregation behavior of Sc and Zr solutes and their effect on the Al sigma 5 (210) [110] symmetrical tilt grain boundary: a first-principles study
|
期刊论文 |
Xiao Zhengbing;Hu Jiawei;Liu Yu;Dong Fang;Huang Yuanchun |
2 |
2219铝合金中温变形过程本构模型的修正及其激活能演化(英文)
|
期刊论文 |
刘磊;吴运新;龚海;王凯 |
3 |
基于RBF神经网络预测2219铝合金多层TIG焊接头拉伸性能研究
|
期刊论文 |
阮德重;张登魁;王国庆;单际国;赵玥;吴爱萍 |
4 |
High-temperature oxidation resistance of VCps-reinforced Fe-matrix composites using an in-situ reaction
|
期刊论文 |
Chen Pinghu;Li Ruiqing;Jiang Ripeng;Zeng Songsheng;Zhang Yun;Li Xiaoqian |
5 |
Effects of axial cold-compression on microstructure uniformity and mechanical property enhancement of large 2219 Al–Cu alloy rings
|
期刊论文 |
Wanfu Guo;Hailin He;Youping Yi;Shiquan Huang;Xianchang Mao;Jie Fang;Jianwu Huang |
6 |
Effect of Shot Peening on Redistribution of Residual Stress Field in Friction Stir Welding of 2219 Aluminum Alloy
|
期刊论文 |
Nie Lin;Wu Yunxin;Gong Hai;Chen Dan;Guo Xudong |
7 |
Numerical simulation of ultrasonic field within the large-scale Al alloy melts treated by scalable sonotrodes
|
期刊论文 |
Peng Hao;Wang Ying;Jiang Ripeng;Li Xiaoqian;Li Ruiqing;Zhang Lihua |
8 |
Microstructure modification for 2219 Al alloy through ultrasonic treatment and fast cooling
|
期刊论文 |
Zhang Li;Jiang Ripeng;Li Xiaoqian;Li Ruiqing;Zhang Lihua |
9 |
一种控制直径1 米级2219 铝合金圆锭成分偏析的多源超声布控方法
|
专利 |
李瑞卿;李晓谦;蒋日鹏;张立华;刘峙麟;彭浩 |
10 |
Microstructure, mechanical properties, and wear resistance of VCp-reinforced Fe-matrix composites treated by Q&P process
|
期刊论文 |
Chen Ping-hu;Li Yi-bo;Li Rui-qing;Jiang Ri-peng;Zeng Song-sheng;Li Xiao-qian |
11 |
提高时效强化铝合金熔化焊接头拉伸性能的方法
|
专利 |
吴爱萍;张登魁;赵玥;李权;单际国;刘磊;王国庆;鄢东洋;宋建岭;蒙丹阳 |
12 |
多源超声对2219铝合金铸锭凝固组织和成分偏析的影响
|
期刊论文 |
杨林学;张立华;李瑞卿 |
13 |
Microstructural evolution and mechanical properties of the AA2219/TiC nanocomposite manufactured by ultrasonic solidification
|
期刊论文 |
Yang Yilong;Liu Zhilin;Jiang Ripeng;Li Ruiqing;Li Xiaoqian |
14 |
Effects of cold predeformation on dissolution of second-phase Al2Cu particles during solution treatment of 2219 Al-Cu alloy forgings
|
期刊论文 |
He Hailin;Yi Youping;Huang Shiquan;Zhang Yuxun |
15 |
Tuning the microstructure morphology and genetic mechanical properties of 2219 Al alloy with ultrasonic treatment
|
期刊论文 |
Yun Zhang;Ruiqing Li;Pinghu Chen;Yilong Yang;Xiaoqian Li;Ripeng Jiang |
16 |
大直径铝锭热顶铸造中超声施振深度的细晶机制
|
期刊论文 |
王莹;李晓谦;李瑞卿;田阳 |
17 |
2219大规格铸锭成分偏析行为及多向锻-固溶时效热处理对铸锭组织和性能的影响
|
期刊论文 |
徐道芬;陈送义;余芳;陈康华;刘德博 |
18 |
Manufacturing large 2219 Al-Cu alloy rings by a cold rolling process
|
期刊论文 |
Guo Wanfu;Yi Youping;Huang Shiquan;Mao Xianchang;Fang Jie;Tong Dengliang;Luan Yameng |
19 |
Static Softening Behavior and Modified Kinetics of Al 2219 Alloy Based on a Double-Pass Hot Compression Test.
|
期刊论文 |
Liu Lei;Wu Yunxin;Gong Hai;Ahmad Abdulrahaman Shuaibu;Dong Fang;Yu Huamin |
20 |
Effects of Deformation Parameters on Microstructural Evolution of 2219 Aluminum Alloy during Intermediate Thermo-Mechanical Treatment Process
|
期刊论文 |
Liu Lei;Wu Yunxin;Gong Hai |
21 |
一种调控2219铝合金环件粗大第二相的方法
|
专利 |
易幼平;黄始全;郭万富;毛献昌;何海林 |
22 |
基于声学的超声辅助铸造铝合金工艺优化
|
期刊论文 |
王超;李瑞卿;胡雨琪;李晓谦 |
23 |
Residual Stress Relief in 2219 Aluminium Alloy Ring Using Roll-Bending
|
期刊论文 |
Gong Hai;Sun Xiaoliang;Liu Yaoqiong;Wu Yunxin;Wang Yanan;Sun Yanjie |
24 |
提高2219铝合金环件综合力学性能的工艺方法
|
专利 |
易幼平;何海林;黄始全;张玉勋;崔金栋;吴长俊 |
25 |
Scalable Ultrasound-Assisted Casting of Ultra-large 2219 Al Alloy Ingots
|
期刊论文 |
Liu Zhilin;Li Ruiqing;Jiang Ripeng;Zhang Lihua;Li Xiaoqian |
26 |
Microstructural evolution and its effect on mechanical properties in different regions of 2219-C10S aluminum alloy TIG-welded joint
|
期刊论文 |
Zhang Deng-kui;Wu Ai-ping;Zhao Yue;Shan Ji-guo;Wang Guo-qing;Song Jian-ling;Zhang Zhong-ping;Liu Xian-li |
27 |
预拉伸变形对2219铝合金环形件组织与力学性能的影响
|
期刊论文 |
方杰;易幼平;黄始全;何海林;郭万富 |
28 |
2219铝合金大型环件组织性能调控方法与工程应用研究
|
奖励 |
何海林;易幼平 |
29 |
一种铝合金环件的校圆系统
|
专利 |
阙基容 |
30 |
Research on microstructures and mechanical properties of welded joints of 2219-C10S aluminum alloy
|
会议论文 |
D.K. Zhang;Q. Li;G.Q. Wang;X.L. Liu;J.L. Song;Y. Zhao;A.P. Wu |
31 |
Possible Effects and Mechanisms of Ultrasonic Cavitation on Oxide Inclusions during Direct-Chill Casting of an Al Alloy
|
期刊论文 |
Zhang Yun;Li Ruiqing;Li Xiaoqian;Yang Yilong;Chen Pinghu;Dong Fang;Jiang Ripeng |
32 |
Second phase particles and mechanical properties of 2219 aluminum alloys processed by an improved ring manufacturing process
|
期刊论文 |
Mao Xianchang;Yi Youping;He Hailin;Huang Shiquan;Guo Wanfu |
33 |
The Multiple Ultrasound-assisted Casting of Large-scale Al Alloy Components
|
会议论文 |
LIU Zhi lin;LI Rui qing;LI Xiao qian;JIANG Ripeng;LI Yibo |
34 |
A Comparative Study on the Effect of Four-Source Ultrasonic Power on the Microstructure and Mechanical Properties of Large-Scale 2219 Aluminum Ingots
|
期刊论文 |
Zhang Li;Li Ruiqing;Jiang Ripeng;Zhang Lihua;Li Xiaoqian |
35 |
Effect of ultrasonication on the microstructure and macrosegregation of a large 2219 aluminum ingot
|
期刊论文 |
Zhong Zhen Tao;Li Rui Qing;Li Xiao Qian;Chen Ping Hu |
36 |
Prediction of temperature and residual stress distributions in friction stir welding of aluminum alloy
|
期刊论文 |
Nie L.;Wu Y. X.;Gong H. |
37 |
Cu含量对Al-Cu-Mn合金力学性能各向异性的影响
|
期刊论文 |
余芳;徐道芬;陈送义;陈康华;王习锋;刘德博;马云龙;黄诚;鄢东洋 |
38 |
Effect of Post-aging Heat Treatment on Strength and Local Corrosion Behavior of Ultrafine-Grained 2219 Al Alloy
|
期刊论文 |
Chen Songyi;Li Fushan;Liu Qiang;Chen Kanghua;Huang Lanping |
39 |
一种时效工装
|
专利 |
阙基容 |
40 |
Hot deformation characteristics and processing parameter optimization of 2219 Al alloy using constitutive equation and processing
|
期刊论文 |
He Hailin;Yi Youping;Cui Jindong;Huang Shiquan |
41 |
超声无损评价2219铝合金晶粒尺寸
|
期刊论文 |
雷洋;龚海 |
42 |
Uncovering the Zr segregation behavior and its effect on the fracture strength of Al Σ5 (210) [100] symmetrical tilt grain boundary: Insight from first principles calculation
|
期刊论文 |
Zhengbing Xiao;Jiawei Hu;Xieyi Zhang;Yuanchun Huang |
43 |
Residual Stress Analysis of a 2219 Aluminum Alloy Ring Using the Indentation Strain-Gauge Method
|
期刊论文 |
Ma Yunlong;Xue Nianpu;Wu Qiong;Gao Hanjun;Wu Jian |
44 |
Modified kinetic model for describing continuous dynamic recrystallization behavior of Al 2219 alloy during hot deformation process
|
期刊论文 |
Liu Lei;Wu Yunxin;Gong Hai;Dong Fang;Ahmad A. S. |
45 |
A Physically Based Constitutive Model and Continuous Dynamic Recrystallization Behavior Analysis of 2219 Aluminum Alloy during Hot Deformation Process
|
期刊论文 |
Liu Lei;Wu Yunxin;Gong Hai;Li Shuang;Ahmad A. S. |
46 |
Effects of thermomechanical treatment on grain refinement, second-phase particle dissolution, and mechanical properties of 2219 Al alloy
|
期刊论文 |
He Hailin;Yi Youping;Huang Shiquan;Guo Wanfu;Zhang Yuxun |
47 |
Evolution of the Second-Phase Particles and Their Effect on Tensile Fracture Behavior of 2219 Al-xCu Alloys
|
期刊论文 |
Xu Daofen;Chen Kanghua;Chen Yunqiang;Chen Songyi |
48 |
Improvements on the tensile properties of 2219-T8 aluminum alloy TIG welding joint with weld shape optimization
|
会议论文 |
Aiping Wu;Dengkui Zhang;Quan Li;Guoqing Wang;Xianli Liu;Jianling Song;Yue Zhao |
49 |
Cu含量对2219铝合金锻件及其焊接接头组织与性能的影响
|
期刊论文 |
邢军;陈康华;陈送义;陈运强;余芳;刘德博 |
50 |
2219铝合金搅拌摩擦焊温度与残余应力热力耦合模拟
|
期刊论文 |
万胜强;吴运新;龚海;聂林 |
51 |
Effects of deformation temperature on the evolution of second mechanical phase and properties of large 2219 Al-Cu alloy rings
|
期刊论文 |
Guo Wanfu;Yi Youping;Huang Shiquan;Mao Xianchang;Fang Jie;He Hailin;Hu Bin |
52 |
2219铝合金高温塑性变形应变补偿的本构模型
|
期刊论文 |
王凯;吴运新;龚海;刘磊 |
53 |
Residual Stress Relief for 2219 Aluminum Alloy Weldments: A Comparative Study on Three Stress Relief Methods
|
期刊论文 |
Chen Shu-Guang;Zhang Yi-Du;Wu Qiong;Gao Han-Jun;Yan Dong-Yang |
54 |
Microstructure and Mechanical Properties of Three-Layer TIG-Welded 2219 Aluminum Alloys with Dissimilar Heat Treatments
|
期刊论文 |
Zhang Dengkui;Li Quan;Zhao Yue;Liu Xianli;Song Jianling;Wang Guoqing;Wu Aiping |
55 |
Effect of Multi-Source Ultrasonic on Segregation of Cu Elements in Large Al-Cu Alloy Cast Ingot
|
期刊论文 |
Peng Hao;Li Ruiqing;Li Xiaoqian;Ding Shan;Chang Mengjun;Liao Liqing;Zhang Yun;Chen Pinghu |
56 |
Effect of Ultrasonic filed on ndercooling and Nucleation Rate During Solidification of Aluminium Alloy
|
会议论文 |
LI Rui qing;LIU Zhi lin;CHEN Ping hu;LI Xiao qian;JIANG Ripeng |
57 |
The cavitation erosion of ultrasonic sonotrode during large-scale metallic casting: Experiment and simulation
|
期刊论文 |
Tian Yang;Liu Zhilin;Li Xiaoqian;Zhang Lihua;Li Ruiqing;Jiang Ripeng;Dong Fang |
58 |
Finite Element Prediction of Residual Stress and Deformation Induced by Double-Pass TIG Welding of Al 2219 Plate
|
期刊论文 |
Ahmad Abdulrahaman Shuaibu;Wu Yunxin;Gong Hai;Nie Lin |
59 |
新一代火箭贮箱大型整体过渡环组件制造技术
|
奖励 |
王国庆;易幼平;王正安;陈康华;李权;李晓谦;鄢东洋;赵玥;黄元春;宋建岭;阙基容;吴运新;刘琦;杜正勇;张文学 |
60 |
Effects of deformation temperature on second-phase particles and mechanical properties of 2219 Al-Cu alloy
|
期刊论文 |
He Hailin;Yi Youping;Huang Shiquan;Zhang Yuxun |
61 |
Hot Deformation Behavior and Microstructure Mechanisms of As-Cast 2219 Al Alloy
|
期刊论文 |
Zhang Yun;Jiang Ripeng;Yang Yilong;Li Ruiqing;Chen Pinghu;Li Xiaoqian;Zhang Lihua |
62 |
变形温度对2219铝合金组织和力学性能的影响
|
期刊论文 |
吴长俊;易幼平;何海林 |
63 |
An improved process for grain refinement of large 2219 Al alloy rings and its influence on mechanical properties
|
期刊论文 |
He Hailin;Yi Youping;Huang Shiquan;Zhang Yuxun |
64 |
试样尺寸对2219铝合金焊接接头残余应力及拉伸性能的影响
|
会议论文 |
王强;赵天奕;赵玥;吴爱萍;鄢东洋 |
65 |
Study on the inconsistency in mechanical properties of 2219 aluminium alloy TIG-welded joints
|
期刊论文 |
Zhang Dengkui;Wang Guoqing;Wu Aiping;Zhao Yue;Li Quan;Liu Xianli;Meng Danyang;Song Jianling;Zhang Zhongping |
66 |
一种超声辅助热顶半连铸制备大规格2XXX系铝合金圆锭的方法
|
专利 |
李晓谦;李瑞卿;蒋日鹏;张立华;刘峙麟;彭浩;赵啸林 |
67 |
Effects of weld penetration on tensile properties of 2219 aluminum alloy TIG-welded joints
|
期刊论文 |
Zhang Deng-kui;Zhao Yue;Dong Ming-ye;Wang Guo-qing;Wu Ai-ping;Shan Ji-guo;Meng Dan-yang;Liu Xian-li;Song Jian-ling;Zhang Zhong-ping |
68 |
T9I6断续时效对2219铝合金组织和力学性能的影响
|
期刊论文 |
王习锋;陈康华;陈送义;徐道芬;李福山 |
69 |
2219-T87/T852铝合金异质接头力学性能弱化及断裂机制
|
期刊论文 |
黄诚;王非凡;鄢东洋;刘德博;胡正根 |
70 |
双级固溶处理对2219铝合金锻环各向异性及力学性能的影响
|
期刊论文 |
刘塑;张昀;李瑞卿;李晓谦 |
71 |
Employing Cold Spray to Alter the Residual Stress Distribution of Workpieces: A Case Study on Fusion-Welded AA2219 Joints
|
期刊论文 |
Li W. Y.;Zou Y. F.;Wang F. F.;Yang X. W.;Xu Y. X.;Hu K. W.;Yan D. Y. |
72 |
Determination of the influence of post-heat treatment on the second phase of Al 2219-T6 alloy using the ultrasonic non-linear measurement technique
|
期刊论文 |
You Jun;Wu Yunxin;Gong Hai;Ahmad A. S.;Lei Yang |
73 |
Segregation of solute elements and their effects on the strength of Al Σ5 (210) [001] symmetrical tilt grain boundary in 2219 alloys
|
期刊论文 |
Jiawei Hu;Zhengbing Xiao;Yuanchun Huang |
74 |
Effects of Post-weld Heat Treatment on Microstructure, Mechanical Properties and the Role of Weld Reinforcement in 2219 Aluminum Alloy TIG-Welded Joints
|
期刊论文 |
Zhang Deng-Kui;Wang Guo-Qing;Wu Ai-Ping;Shan Ji-Guo;Zhao Yue;Zhao Tian-Yi;Meng Dan-Yang;Song Jian-Ling;Zhang Zhong-Ping |
75 |
基于Fuzzy-PID的大规格铸锭结晶器液位控制
|
期刊论文 |
郭成林;蒋日鹏;李晓谦;李瑞卿;张立华 |
76 |
Effects of high-intensity ultrasound on the microstructures and mechanical properties of ultra-large 2219 Al alloy ingot
|
期刊论文 |
Zhang Li;Li Xiaoqian;Li Ruiqing;Jiang Ripeng;Zhang Lihua |
77 |
Modification of constitutive model and evolution of activation energy on 2219 aluminum alloy during warm deformation process
|
期刊论文 |
Liu Lei;Wu Yun-xin;Gong Hai;Wang Kai |
78 |
Microstructural evolution of Al2Cu phase and mechanical properties of the large-scale Al alloy components under different consecutive manufacturing processes
|
期刊论文 |
Zhang Yun;Li Ruiqing;Chen Pinghu;Li Xiaoqian;Liu Zhilin |