| 1 |
Effect of strain rate on mechanical properties of the bamboo material under quasi-static and dynamic loading condition
|
期刊论文 |
Dayong Hu;Bin Song;Linwei Dang;Zhiqiang Zhang |
| 2 |
纤维增强复合材料的层间改性方法及纤维增强复合材料
|
专利 |
段瑛涛;孔凡忠;荣辉;王智文;栗娜;敬敏 |
| 3 |
Investigations on low-energy impact and postimpact fatigue of adhesively bonded single-lap joints using composites substrates
|
期刊论文 |
Wei Huang;Lingyu Sun;Lijun Li;Le Shen;Bincheng Huang;Yiben Zhang |
| 4 |
Energy absorption characteristics of a foamfilled tri-tube under axial quasi-static loading: experiment and numerical simulation
|
期刊论文 |
Dayong Hu;Yongzhen Wang;Bin Song;Yifan Wang |
| 5 |
连续纤维复合材料增强金属基的制备方法及制造模具
|
专利 |
李文博 |
| 6 |
Generation mechanism of interfacial residual stress and its effect on mechanical properties of hybrid fiber-reinforced thermoplastic polymer (HFRTP)
|
会议论文 |
Wan Cao;Ning Kang;Lingyu Sun;Shanshu Xiang;Xudong Yang;Yiben Zhang |
| 7 |
Design and Optimization of Composite Automotive Hatchback Using Integrated Material-Structure-Process-Performance Method
|
期刊论文 |
Xudong Yang;Lingyu Sun;Cheng Zhang;Lijun Li;Zongmiao Dai;Zhenkai Xiong |
| 8 |
Crushing resistance and energy absorption of pomelo peel inspired hierarchical honeycomb
|
期刊论文 |
Zhang Wen;Yin Sha;Yu Tongxi;Xu Jun |
| 9 |
热塑性复合材料注塑件的制造装置及制造方法
|
专利 |
段瑛涛;荣辉;王智文;栗娜 |
| 10 |
一种碳纤维表面薄毡抄片成型器和方法
|
专利 |
顾轶卓;梁吉勇;李敏;王绍凯;张佐光 |
| 11 |
基于注塑残余应力的复合材料车轮优化方法及装置
|
专利 |
胡代钧;单颖春;刘献栋 |
| 12 |
A highly effective energy mitigation system combining carbon nanotube and buckyballs
|
期刊论文 |
Dayong Hu;Jianxing Hu;Hanlin Jiang;Jun Xu |
| 13 |
Experimental investigation of the strength of polymer-steel direct adhesion (PSDA) joints with micro-structures ablated by laser
|
期刊论文 |
Bincheng Huang;Lingyu Sun;Lijun Li;Lin Zhang;Yi Lin;Jiangtao Che |
| 14 |
Direct injection molding and mechanical properties of high strength steel/ composite hybrids
|
期刊论文 |
Yiben Zhang;Lingyu Sun;Lijun Li;Bincheng Huang;Taikun Wang;Yantao Wang |
| 15 |
Mechanical Behaviors of Flax Fiber-Reinforced Composites at Different Strain Rates and Rate-Dependent Constitutive Model
|
期刊论文 |
Dayong Hu;Linwei Dang;Chong Zhang;d Zhiqiang Zhang |
| 16 |
Energy-absorption characteristics of a bionic honeycomb tubular nested structure inspired by bamboo under axial crushing
|
期刊论文 |
Dayong Hu;Yongzhen Wang;Bin Song;Linwei Dang;Zhiqiang Zhang |
| 17 |
An Analytical Approach for Predicting the Tensile Strength of Plain Weave Fabric Composites
|
期刊论文 |
Qian Wang;Lingyu Sun;Wu Yang;Bowen Zhan;Xudong Yang |
| 18 |
Energy absorption characteristics of composite tubes with different fibers and matrix under axial quasi-static and impact crushing conditions
|
期刊论文 |
Dayong Hu;Yongzhen Wang;Linwei Dang;Qiang Pan |
| 19 |
IMAGE IDENTIFICATION OF A MOVING OBJECT BASED ON AN IMPROVED CANNY EDGE DETECTION ALGORITHM
|
会议论文 |
Yang Liu;Lingyu Sun;Lijun Li;Yiben Zhang;Zongmiao Dai;Zhenkai Xiong |
| 20 |
长纤维及连续纤维增强热塑性复合材料的电阻加热快速成型方法
|
专利 |
王绍凯;顾轶卓;李敏;梁吉勇;张佐光 |
| 21 |
Electromagnetic shielding property of carbon fiber felt made of different types of short-chopped carbon fibers
|
期刊论文 |
Jiyong Liang;Yizhuo Gu;Ming Bai;Shaokai Wang;Min Li;Zuoguang Zhang |
| 22 |
UNCERTAINTY OPTIMIZATION DESIGN OF VEHICLE WHEEL MADE OF LONG GLASS FIBER REINFORCED THERMOPLASTIC
|
会议论文 |
Daijun Hu;Yingchun Shan;Xiandong Liu;Weihao Chai;Xiaoyin Wang |
| 23 |
Experimental and numerical investigations on microstructures and mechanical properties of hybrid fiber reinforced thermoplastic polymer
|
期刊论文 |
Qian Wang;Lingyu Sun;Lijun Li;Wu Yang;Yiben Zhang;Zongmiao Dai;Zhenkai Xiong |
| 24 |
一种泡沫填充三周期极小曲面多孔结构夹芯板及制备方法
|
专利 |
胡大勇;李贤;肖译林;党霖薇;王吉;李政林 |
| 25 |
Enhanced microwave shielding effectiveness and suppressed reflection of chopped carbon fiber felt by electrostatic flocking of carbon fiber
|
期刊论文 |
Xiaoyan Chen;Yizhuo Gu;Jiyong Liang;Ming Bai;Shaokai Wang;Min Li;Zuoguang Zhang |
| 26 |
An efficient numerical method to analyze low-velocity impact response of carbon fiber reinforced thermoplastic laminates
|
期刊论文 |
Yiben Zhang;Lingyu Sun;Lijun Li;Haiyan Xiao;Yantao Wang |
| 27 |
A real-time image matching algorithm for binocular stereo measurement system
|
会议论文 |
Jianyu Duan;Lingyu Sun;Lijun Li;Zongmiao Dai;Zhenkai Xiong;Jinxi Wang |
| 28 |
Experimental and numerical investigations on low-velocity impact response of high strength steel/composite hybrid plate
|
期刊论文 |
Zhang Yiben;Sun Lingyu;Li Lijun;Wang Taikun;Shen Le |
| 29 |
Impact Damage Prediction of Assembly Fiber-Reinforced Thermoplastic Polymer (AFRTP) structures
|
会议论文 |
Xudong Yang;Lingyu Sun;Lijun Li;Cheng Zhang |
| 30 |
Fiber distribution of long fiber reinforced polyamide and effect of fiber orientation on mechanical behavior
|
期刊论文 |
Hanrui Zhu;Yizhuo Gu;Zhongjia Yang;Qinghui Li;Min Li;Shaokai Wang;Zuoguang Zhang |
| 31 |
Lightweight scheme selection for automotive safety structures using a quantifiable multi-objective approach
|
期刊论文 |
Yantao Chu;Lingyu Sun;Lijun Li |
| 32 |
车用复合材料螺旋弹簧的设计与优化
|
期刊论文 |
詹博文;孙凌玉;黄彬城;赵冠博;王倩 |
| 33 |
Dynamic mechanical behavior and pedestrian safety characteristics of toughened laminated windshield
|
期刊论文 |
Yunqi Li;Danping Xiong;Lubing Wang;Bill Feng;Jun Xu |
| 34 |
注塑成型长玻纤 /尼龙复合材料车轮纤维分布规律研究
|
期刊论文 |
朱涵睿;顾轶卓;孟庆宇;张佐光 |
| 35 |
Tire–rim interface pressure of a commercial vehicle wheel under radial loads: theory and experiment
|
期刊论文 |
Xiaofei Wan;Yingchun Shan;Xiandong Liu;Tian He;Jiegong Wang |
| 36 |
Topology optimization of transmission system of flapping-wing micro aerial vehicle via 3D printing
|
期刊论文 |
Zuyong Chen;Jianghao Wu;Yanlai Zhang |
| 37 |
碳纤维/尼龙6预浸料的制备及盒体的 热冲压成型工艺
|
期刊论文 |
李宏福;姚瑞娟;王会平;王洋;张博明 |
| 38 |
Mechanical properties and impact performance of silk-epoxy resin composites modulated by flax fibres
|
期刊论文 |
Change Wu;Kang Yang;Yizhuo Gu;Jun Xu;Robert O. Ritchie;Juan Guan |
| 39 |
不同铺层方式下连续玻璃纤维/聚丙烯复合材料 波纹夹芯板的力学性能
|
期刊论文 |
李静雯;张博明;孙义亮;王洋;李宏福 |
| 40 |
连续碳纤维/尼龙6热塑性复合材料的吸湿及 力学性能
|
期刊论文 |
李宏福;王淑范;孙海霞;王洋;张博明 |
| 41 |
Numerical investigation on percolation threshold of CNT-reinforced conductive composites based on three-dimensional Monte Carlo method
|
会议论文 |
Zhuangzhuang He;Lijun Li;Taikun Wang;Yantao Wang;Xudong Yang;Wenming Yang |
| 42 |
Progressive failure prediction of FRP tubes by modified damage model
|
期刊论文 |
Bowen Zhan;Lingyu Sun;Bincheng Huang |
| 43 |
Effects of strain rate and high temperature environment on the mechanical performance of carbon fiber reinforced thermoplastic composites fabricated by hot press molding
|
期刊论文 |
Yiben Zhang;Lingyu Sun;Lijun Li;Junlei Wei |
| 44 |
Parametric Modeling and Optimization of CFRP/Steel Adhesive Structures
|
会议论文 |
Wei Huang;Lingyu Sun;Yantao Chu;Cheng Zhang;Lijun Li |
| 45 |
Modulating the sensing behaviors of poly(styrene-ethylene-butylenestyrene)/carbon nanotubes with low-dimensional fillers for large deformation sensors
|
期刊论文 |
Xudong Yang;Lingyu Sun;Cheng Zhang;Bincheng Huang;Yantao Chu;Bowen Zhan |
| 46 |
Effect of polyurethane sizing on carbon fibers surface and interfacial adhesion of fiber/polyamide 6 composites
|
期刊论文 |
Tao Zhang;Yueqing Zhao;Hongfu Li;Boming Zhang |
| 47 |
Experimental investigation on mechanical properties and failure mechanisms of polymer composite-metal hybrid materials processed by direct injection-molding adhesion method
|
期刊论文 |
Lijun Li;Lingyu Sun;Zongmiao Dai;Zhenkai Xiong;Bincheng Huang;Yiben Zhang |
| 48 |
制造车辆零部件的方法和车辆零部件及车辆
|
专利 |
段瑛涛 |
| 49 |
Numerical study on explosion cutting process of PMMA plate and key factors influence on cutting performance
|
会议论文 |
Lei Ge;Yantao Wang;Huipeng Hu;Lijun Li;Yiben Zhang |
| 50 |
Measurements and analysis of the dielectric properties of aramid/epoxy composites based on free space method under stress conditions
|
期刊论文 |
Xiangyu Xu;Boming Zhang;Kai Liu;Liying Xing;Dawei Liu;Ming Bai |
| 51 |
Electrical and mechanical properties of CNT/CB dual filler conductive adhesives (DFCAs) for automotive multi-material joints
|
期刊论文 |
Cheng Zhang;Lingyu Sun;Bincheng Huang;Xudong Yang;Yantao Chu;Bowen Zhan |
| 52 |
Effect of hybrid sizing with nano-SiO2 on the interfacial adhesion of carbon fibers/nylon 6 composites
|
期刊论文 |
Tao Zhang;Yixuan Song;Yueqing Zhao;Boming Zhang |
| 53 |
3D Numerical Model for Prediction of Percolation Threshold and Piezoresistive Characteristics of Conductive Polymer Filled With CNT
|
会议论文 |
Jun Han;Lingyu Sun;Lijun Li;Bincheng Huang;Xudong Yang;Taikun Wang |
| 54 |
Structural integrity analysis of transmission structure in flappingwing micro aerial vehicle via 3D printing
|
期刊论文 |
Zuyong Chen;Jun Xu;Binghe Liu;YanLai Zhang;Jianghao Wu |
| 55 |
Compressive properties of hollow lattice truss reinforced honeycombs (Honeytubes) by additive manufacturing: Patterning and tube alignment effects
|
期刊论文 |
Jun Xu;Yaobo Wu;Lubing Wang;Jiani Li;Yuwei Yang;Yuli Tian;Zizheng Gong;Pinliang Zhang;Steven Nutt;Sha Yin |
| 56 |
Resistance heating forming process based on carbon fiber veil for continuous glass fiber reinforced polypropylene
|
期刊论文 |
Cong Liu;Min Li;Yizhuo Gu;Yuanming Gong;Jiyong Liang;Shaokai Wang;Zuoguang Zhang |
| 57 |
Tuning the properties of functional adhesives with hybrid nanofillers for structural health monitoring
|
期刊论文 |
Xudong Yang;Lingyu Sun;Bincheng Huang;Bowen Zhan;Cheng Zhang;Dong An |
| 58 |
Dynamic compressive behavior of woven flax-epoxy-laminated composites
|
期刊论文 |
Jianxing Hu;Sha Yin;Tongxi Yu;Jun Xu |
| 59 |
Introducing composite lattice core sandwich structure as an alternative proposal for engine hood
|
期刊论文 |
Sha Yin;Haoyu Chen;Yaobo Wu;Yibing Li;Jun Xu |
| 60 |
模压+注塑热塑性混杂纤维座椅横梁
|
奖励 |
北京汽车研究总院有限公司;北京航空航天大学 |
| 61 |
Additive Manufacturing as a Method to Design and Optimize Bioinspired Structures
|
期刊论文 |
Audrey Velasco-Hogan;Jun Xu;Marc A. Meyers |
| 62 |
热塑性复合材料在汽车车身结构件上的应用开发
|
期刊论文 |
段瑛涛;王智文;栗娜;敬敏;刘永杰;芮燕杰 |
| 63 |
Interfacial adhesion between carbon fibers and nylon 6: Effect of fiber surface chemistry and grafting of nano-SiO2
|
期刊论文 |
Tao Zhang;Yue Xu;Hongfu L;Boming Zhang |
| 64 |
Static and dynamic behavior of unbalanced bonded joints with adhesion defects in automotive structures
|
期刊论文 |
Yantao Chu;Lingyu Sun;Bowen Zhan;Xudong Yang;Cheng Zhang |
| 65 |
Research on simulation of the bending fatigue test of automotive wheel made of long glass fiber reinforced thermoplastic considering anisotropic property
|
期刊论文 |
Chai Weihao;Liu Xiandong;Shan Yingchun;Wan Xiaofei;Jiang Er |
| 66 |
Design and strengthening mechanisms in hierarchical architected materials processed using additive manufacturing
|
期刊论文 |
Yin Sha;Li Jiani;Chen Haoyu;Robert O. Ritchie;Xu Jun |
| 67 |
STRUCTURAL DESIGN AND PERFORMANCE ANALYSIS OF A DEPLOYABLE VEHICLE SHELTER WITH HYBRID FRP COMPOSITES AND ALUMINUM
|
会议论文 |
Jinxi Wang;Lingyu Sun;Lijun Li;Jianyu Duan |
| 68 |
智能材料与汽车结构健康监测
|
期刊论文 |
李立军;孙凌玉;黄彬城;褚艳涛;张一犇 |
| 69 |
Finite element analysis of the residual stress of automotive wheel made of long glass fiber-reinforced thermoplastic composite
|
期刊论文 |
Weihao Chai;Xiandong Liu;Yinchun Shan;Xiaofei Wan;Er Jiang |
| 70 |
Repeated low-velocity impact response and damage mechanism of glass fiber aluminium laminates
|
期刊论文 |
Lijun Li;Lingyu Sun;Taikun Wang;Ning Kang;Wan Cao |
