镁合金板材基面织构分布对称性调控及其对成形性的影响
U1764253
2017
E0104.金属结构材料与力学行为
蒋斌
联合基金项目
教授
重庆大学
244万元
板材;基面织构;镁合金;成形性
2018-01-01到2021-12-31
- 中英文摘要
- 结题摘要
- 结题报告
- 项目成果
- 项目参与人
查看更多信息请先登录或注册
查看更多信息请先登录或注册
查看更多信息请先登录或注册
| 序号 | 标题 | 类型 | 作者 |
|---|---|---|---|
| 1 | Improving performance of friction stir welded AZ31/AM60 dissimilar joint by adjusting texture distribution and microstructure | 期刊论文 | Zhang Junlei;Chen Xiang;Xia Dabiao;Huang Guangsheng;Tang Aitao;Jiang Bin;Pan Fusheng |
| 2 | Improved microstructures of AZ31 magnesium alloy by semi-solid extrusion | 期刊论文 | Jingkai Feng;Dingfei Zhang;Hongjun Hu;Yang Zhao;Xia Chen;Bin Jiang;Fusheng Pan |
| 3 | Mg-6Zn-1Mn-4Sn-0.5Ca合金在挤压和时效过程中的组织演变和析出强化(英文) | 期刊论文 | 陈霞;张丁非;赵阳;冯靖凯;蒋斌;潘复生 |
| 4 | Energy absorption within elastic range for AZ31 magnesium alloy | 期刊论文 | Yang Yongbiao;Zhang TingYan;Guo Jinxuan;Zhang Zhimin;Wang Qiang;Li Guojun |
| 5 | 一种镁合金薄板带坯挤压装置及挤压成型方法 | 专利 | 蒋斌;徐军;王庆航;赵俊;柴炎福;黄光胜;张丁非;王敬丰;彭建;潘复生 |
| 6 | Experimental evaluation of MoS2 nanosheets as lubricant additive in different types of base oil for magnesium alloy/steel pairs | 期刊论文 | Xie Hongmei;Jiang Bin;Tang Changping;Dai Jiahong;Quan Xin;Pan Fusheng |
| 7 | 一种高塑性镁合金及其制备方法 | 专利 | 蒋斌;柴炎福;潘复生;赵俊;罗永欢;沈亚群;宋江凤;黄光胜;张丁非 |
| 8 | 一种含稀土钇的室温高塑性镁合金及其制备方法 | 专利 | 蒋斌;沈亚群;潘复生;王庆航;赵俊;罗永欢;宋江凤;黄光胜;张丁非 |
| 9 | Strategies for enhancing the room-temperature stretch formability of magnesium alloy sheets: a review | 期刊论文 | Qinghang Wang;Bin Jiang;Daolun Chen;Zhaoyang Jin;Lingyu Zhao;Qingshan Yang;Guangsheng Huang;Fusheng Pan |
| 10 | Pre-strain effect on twinning and de-twinning behaviors of Mg-3Li alloy traced by quasi-in-situ EBSD | 期刊论文 | Qinghang Wang;Bin Jiang;Jun Zhao;Dingfei Zhang;Guangsheng Huang;Fusheng Pan |
| 11 | Formation of the elliptical texture and its effect on the mechanical properties and stretch formability of dilute Mg-Sn-Y sheet by Zn addition | 期刊论文 | Wang Qinghang;Jiang Bin;Tang Aitao;He Chao;Zhang Dingfei;Song Jiangfeng;Yang Tianhao;Huang Guangsheng;Pan Fusheng |
| 12 | Improving the room-temperature formability of Mg-3Al-1Zn alloy sheet by introducing an orthogonal four-peak texture | 期刊论文 | He Junjie;Mao Yong;Fu Yingjie;Jiang Bin;Xiong Kai;Zhang Shunmeng;Pan Fusheng |
| 13 | Effect of biaxial compressive stress state on the microstructure evolution and deformation compatibility of rolled sheet Mg alloy AZ31 at room temperature | 期刊论文 | Xia Dabiao;Zhang Junlei;Chen Xiang;Huang Guangsheng;Jiang Bin;Tang Aitao;Gavras Sarkis;Huang Yuanding;Hort Norbert;Pan Fusheng |
| 14 | Influence of Ca and Zn synergistic alloying on the microstructure, tensile properties and strain hardening of Mg-1Gd alloy | 期刊论文 | Zhao Jun;Jiang Bin;Yuan Yuan;Tang Aitao;Wang Qinghang;Yang Tianhao;Huang Guangsheng;Zhang Dingfei;Pan Fusheng |
| 15 | Twin nucleation, twin growth and their effects on annealing strengths of Mg-Al-Zn-Mn sheets experienced different pre-compressive strains | 期刊论文 | Wang Qinghang;Liu Lintao;Jiang Bin;Fu Jie;Tang Aitao;Jiang Zhongtao;Sheng Haoran;Zhang Dingfei;Huang Guangsheng;Pan Fusheng |
| 16 | Deformation behavior and texture evolution in an extruded Mg-Li sheet with non-basal texture during tensile deformation | 期刊论文 | Zhao Jun;Jiang Bin;Tang Aitao;Chai Yanfu;Liu Bo;Sheng Haoran;Yang Tianhao;Huang Guangsheng;Zhang Dingfei;Pan Fusheng |
| 17 | 结构功能一体化镁合金及挤压成形关键技术与应用 | 奖励 | 王敬丰;陈先华;蒋斌;潘复生;张丁非;崔凯 |
| 18 | Characterization of newly developed friction stir-arc welding method for AM60/AZ31 dissimilar Mg alloy | 期刊论文 | Zhang Junlei;Huang Yu;Xiang Jin;Huang Guangsheng;Chen Xiang;Zhou Hu;Jiang Bin;Tang Aitao;Pan Fusheng |
| 19 | Extra strengthening and strain hardening in coarse-grain/ultrafine-grain laminates | 期刊论文 | Chen Xiang;Liu Shuaishuai;Liu Ke;Huang Guangsheng;Zhang Junlei;Tang Aitao;Jiang Bin;Pan Fusheng |
| 20 | Mg-6Zn-1Mn-2Sn-0.5Ca合金挤压态和热处理态的组织与力学性能(英文) | 期刊论文 | 陈霞;张丁非;冯靖凯;赵阳;蒋斌;潘复生 |
| 21 | 热处理对Mg-Zn-Mn-Gd合金显微组织和力学性能的影响 | 期刊论文 | 赵阳;张丁非;冯靖凯;陈霞;蒋斌 |
| 22 | Achieving High Ductility in Hot-Rolled Mg-xZn-0.2Ca-0.2Ce Sheet by Zn Addition | 期刊论文 | Wang Guangang;Huang Guangsheng;Huang Yu;Zhang Cheng;Jiang Bin;Tang Aitao;Pan Fusheng |
| 23 | Enhanced formability of a magnesium alloy sheet via in-plane prestrain paths | 期刊论文 | Yang Qingshan;Jiang Bin;Wang Lifei;Dai Jiahong;Zhang Jianyue;Pan Fusheng |
| 24 | Reduction per pass effect on texture traits and mechanical anisotropy of Mg–Al–Zn–Mn–Ca alloy subjected to unidirectional and cross rolling | 期刊论文 | Qinghang Wang;Bin Jiang;Lintao Liu;Qingshan Yang;Dabiao Xia;Dingfei Zhang;Guangsheng Huang;Fusheng Pan |
| 25 | Microscopic deformation compatibility during biaxial tension in AZ31 Mg alloy rolled sheet at room temperature | 期刊论文 | Xia Dabiao;Huang Guangsheng;Liu Shuaishuai;Tang Aitao;Gavras Serge;Huang Yuanding;Hort Norbert;Jiang Bin;Pan Fusheng |
| 26 | Effect of Gd addition on the microstructure and age hardening behavior of Mg-6Zn-1Mn-4Sn (wt.%) alloy | 期刊论文 | Zhao Yang;Zhang Dingfei;Lei Renjie;Wang Peng;Feng Jingkai;Chen Xia;Jiang Bin;Pan Fusheng |
| 27 | 一种薄壁杯形件的旋转拉深成形方法 | 专利 | 薛勇;樊洪智;张治民;王强;徐健;李旭斌;赵熹;李国俊;方敏 |
| 28 | Effect of precompression and subsequent annealing on the texture evolution and bendability of Mg-Gd binary alloy | 期刊论文 | He Chao;Jiang Bin;Wang Qinghang;Chai Yanfu;Zhao Jun;Yuan Ming;Huang Guangsheng;Zhang Dingfei;Pan Fusheng |
| 29 | 一种多凸模分步反向挤压成形方法 | 专利 | 王强;张治民;孟模;王珺;杨亚琴 |
| 30 | Ultrafine-grained Al–Zn–Mg–Cu alloy processed via cross accumulative extrusion bonding and subsequent aging: Microstructure and mechanical properties | 期刊论文 | Xiang Chen;Dabiao Xia;Junlei Zhang;Guangsheng Huang;Ke Liu;Aitao Tang;Bin Jiang;Fusheng Pan |
| 31 | Fabrication of Mg/Mg composite with sleeve-core structure and its effect on room-temperature yield asymmetry via bimetal casting-co-extrusion | 期刊论文 | Wang Qinghang;Song Yan;Jiang Bin;Fu Jie;Tang Aitao;Sheng Haoran;Song Jiangfeng;Zhang Dingfei;Jiang Zhongtao;Huang Guangsheng;Pan Fusheng |
| 32 | 镁合金塑性加工技术发展及应用 | 期刊论文 | 潘复生;蒋斌 |
| 33 | Microstructure Distribution and Tensile Anisotropy of Dissimilar Friction Stir Welded AM60 and AZ31 Magnesium Alloys | 期刊论文 | Zhang Jun-Lei;Liu Han;Xie Yu-Lu;Huang Guang-Sheng;Chen Xiang;Jiang Bin;Tang Ai-Tao;Pan Fu-Sheng |
| 34 | 挤压-剪切转角对AZ31镁合金组织和性能的影响 | 期刊论文 | 冯靖凯;张丁非;袁圆;陈霞;赵阳;蒋斌;潘复生 |
| 35 | Effect of Nd addition on the microstructure and mechanical properties of extruded Mg-Gd-Zr alloy | 期刊论文 | Lei Bin;Jiang Bin;Yang Huabao;Dong Zhihua;Wang Qinghang;Yuan Ming;Huang Guangsheng;Song Jiangfeng;Zhang Dingfei;Pan Fusheng |
| 36 | Improving mechanical properties of heterogeneous Mg-Gd alloy laminate via accumulated extrusion bonding | 期刊论文 | Liu Shuaishuai;Zhang Junlei;Chen Xiang;Huang Guangsheng;Xia Dabiao;Tang Aitao;Zhu Yuntian;Jiang Bin;Pan Fusheng |
| 37 | 一种提升镁合金挤压板材室温塑性的织构改性方法及产品 | 专利 | 蒋斌;何俊杰;潘复生;罗永欢;王庆航;宋江凤;胡耀波;黄光胜;张丁非 |
| 38 | Influence of Ce content on the microstructures and tensile properties of Mg-1Gd-0.5Zn alloys | 期刊论文 | Zhao Jun;Jiang Bin;Wang Qinghang;Yang Huabao;Yuan Ming;Huang Guangsheng;Zhang Dingfei;Pan Fusheng |
| 39 | Effects of ageing on low-cycle fatigue (LCF) properties of AZ80 magnesium alloy wheel hub | 期刊论文 | Wang Jun;Yang Fulai;Ma Jin;Zhang Tingyan;Cao Hui;Che Xin;Geng Liye;Zhang Zhimin;Wang Qiang;Yang Yongbiao |
| 40 | Unveiling annealing texture formation and static recrystallization kinetics of hot-rolled Mg-Al-Zn-Mn-Ca alloy | 期刊论文 | Wang Qinghang;Jiang Bin;Tang Aitao;Fu Jie;Jiang Zhongtao;Sheng Haoran;Zhang Dingfei;Huang Guangsheng;Pan Fusheng |
| 41 | 石墨烯和氧化石墨烯水基润滑添加剂在镁合金冷轧中的摩擦学行为 | 期刊论文 | 谢红梅;蒋斌;戴甲洪;唐昌平;李权;潘复生 |
| 42 | 一种细化AZ31镁合金的固液两相区复合挤压工艺 | 期刊论文 | 冯靖凯;张丁非;陈霞;赵阳;蒋斌;潘复生 |
| 43 | Comparison of microstructures and mechanical properties of composite extruded AZ31 sheets | 期刊论文 | Chai Yanfu;Song Yan;Jiang Bin;Fu Jie;Jiang Zhongtao;Yang Qingshan;Sheng Haoran;Huang Guangsheng;Zhang Dingfei;Pan Fusheng |
| 44 | Influence of Li Addition on the Microstructures and Mechanical Properties of Mg-Li Alloys | 期刊论文 | Zhao Jun;Fu Jie;Jiang Bin;Tang Aitao;Sheng Haoran;Yang Tianhao;Huang Guangsheng;Zhang Dingfei;Pan Fusheng |
| 45 | A good balance between ductility and stretch formability of dilute Mg-Sn-Y sheet at room temperature | 期刊论文 | Wang Qinghang;Shen Yaqun;Jiang Bin;Tang Aitao;Chai Yanfu;Song Jiangfeng;Yang Tianhao;Huang Guangsheng;Pan Fusheng |
| 46 | Effect of tension on edge crack of on-line heating rolled AZ31B magnesium alloy sheet | 期刊论文 | Huang Yuchen;Xiao Biquan;Song Jiangfeng;Zhao Hua;Liu Qiang;Jiang Bin;Pan Fusheng |
| 47 | Comparison of room-temperature stretch formability of the as extruded Mg-Gd alloys with different double-peak pole spacing | 期刊论文 | He Chao;Zhu Huarong;Yuan Ming;Jiang Bin;Wang Qinghang;Chai Yanfu;Huang Guangsheng;Zhang Dingfei;Pan Fusheng |
| 48 | 剪切角对挤压-剪切法制备AZ31镁合金组织和压缩性能的影响(英文) | 期刊论文 | 冯靖凯;张丁非;袁圆;赵阳;陈霞;柴森森;胡红军;蒋斌;潘复生 |
| 49 | Effect of grain size on the luminescent properties of Ce3+ doped Y3Al5O12 ceramic phosphor plates | 期刊论文 | Wen Bo;Zhang Ding-fei;Zhang Na;Feng Jing-kai;Jiang Bin;Pan Fu-sheng;Zhang Yuhe;Yang Liu |
| 50 | Effect of Gd addition on the age hardening response of Mg-6Zn-1Mn alloy | 期刊论文 | Zhao Yang;Zhang Dingfei;Feng Jingkai;Chen Xia;Deng Tianyu;Jiang Bin;Pan Fusheng |
| 51 | Calculation of Schmid factor in Mg alloys: Influence of stress state | 期刊论文 | Xia Dabiao;Chen Xiang;Huang Guangsheng;Jiang Bin;Tang Aitao;Yang Hong;Gavras Serge;Huang Yuanding;Hort Norbert;Pan Fusheng |
| 52 | Optimizing the mechanical properties of friction stir welded dissimilar joint of AM60 and AZ31 alloys by controlling deformation behavior | 期刊论文 | Zhang Junlei;Liu Ke;Huang Guangsheng;Chen Xiang;Xia Dabiao;Jiang Bin;Tang Aitao;Pan Fusheng |
| 53 | Enhanced strength and ductility AZ91 alloy with heterogeneous lamella structure prepared by pre-aging and low-temperature extrusion | 期刊论文 | Liu Shuaishuai;Wang Weizhang;Chen Xiang;Huang Guangsheng;Liu Han;Tang Aitao;Jiang Bin;Pan Fusheng |
| 54 | Improvement of mechanical properties of hot extruded and age treated Mg-Zn-Mn-Ca alloy through Sn addition | 期刊论文 | Chen Xia;Zhang Dingfei;Xu Junyao;Feng Jingkai;Zhao Yang;Jiang Bin;Pan Fusheng |
| 55 | Achieving strength-ductility synergy of AZ91 extruded sheet by balancing dual-heterostructure of grain size and precipitates | 期刊论文 | Liu Shuaishuai;Zhang Baoxuan;Liu Han;Huang Guangsheng;Zou Qin;Tang Aitao;Jiang Bin;Pan Fusheng |
| 56 | Improvement of mechanical properties and reduction of yield asymmetry of extruded Mg-Sn-Zn alloy through Ca addition | 期刊论文 | Chai Yanfu;Jiang Bin;Song Jiangfeng;Wang Qinghang;Gao Hang;Liu Bo;Huang Guangsheng;Zhang Dingfei;Pan Fusheng |
| 57 | Improving Strength and Formability of Rolled AZ31 Sheet by Two-Step Twinning Deformation | 期刊论文 | Yang Qingshan;Jiang Bin;Song Bo;Zhang Jianyue;Pan Fusheng |
| 58 | Influence of minor Ce additions on the microstructure and mechanical properties of Mg-1.0Sn-0.6Ca alloy | 期刊论文 | Chai Yanfu;He Chao;Jiang Bin;Fu Jie;Jiang Zhongtao;Yang Qingshan;Sheng Haoran;Huang Guangsheng;Zhang Dingfei;Pan Fusheng |
| 59 | Ca和Sn对ZM61合金微观组织和性能的影响 | 期刊论文 | 陈霞;张丁非;邓天宇;赵阳;冯靖凯;蒋斌;潘复生 |
| 60 | A micro-alloyed Mg-Sn-Y alloy with high ductility at room temperature | 期刊论文 | Wang Qinghang;Shen Yaqun;Jiang Bin;Tangb Aitao;Song Jiangfeng;Jiang Zhongtao;Yang Tianhao;Huang Guangsheng;Pan Fusheng |
| 61 | Development and Application of Plastic Processing Technologies of Magnesium Alloys | 期刊论文 | Pan Fusheng;Jiang Bin |
| 62 | Ameliorating mechanical properties and reducing anisotropy of as-extruded Mg-1.0Sn-0.5Ca alloy via Al addition | 期刊论文 | Chai Yanfu;Shan Lei;Jiang Bin;Yang Huabao;He Chao;Hao Wenxing;He Junjie;Yang Qingshan;Yuan Ming;Pan Fusheng |
| 63 | Microstructure evolution and mechanical properties of the Mg-Sm-Gd-Zn-Zr alloy during extrusion | 期刊论文 | Yuan Ming;He Chao;Zhao Jun;Yang Huabao;Song Yan;Lei Bin;Qian Xiaoying;Dong Zhihua;Li Qian;Jiang Bin;Pan Fusheng |
| 64 | Effect of microalloyed Ca on the microstructure and corrosion behavior of extruded Mg alloy AZ31 | 期刊论文 | Zhang Cheng;Wu Liang;Huang Guangsheng;Huang Yu;Jiang Bin;Atrens Andrej;Pan Fusheng |
| 65 | Influence of Zn addition on the microstructure, tensile properties and work-hardening behavior of Mg-1Gd alloy | 期刊论文 | Zhao Jun;Jiang Bin;Yuan Yuan;Tang Aitao;Sheng Haoran;Yang Tianhao;Huang Guangsheng;Zhang Dingfei;Pan Fusheng |
| 66 | Anomalous effect of grain size on the room-temperature bendability of Mg–Gd alloy sheet | 期刊论文 | He Chao;Yuan Ming;Jiang Bin;Liu Lintao;Wang Qinghang;Chai Yanfu;Liu Wenjun;Huang Guangsheng;Zhang Dingfei;Pan Fusheng |
| 67 | 一种获得室温高塑性镁合金薄板带坯挤压装置及挤压成型方法 | 专利 | 蒋斌;徐军;刘文君;黄光胜;陈先华;彭建;汤爱涛;胡耀波;宋江凤;潘复生 |
| 68 | Deformation Behavior of the Mg-Zn-Ca-Ce Alloy Sheets Subjected to Uniaxial and Biaxial Tensile Tests | 期刊论文 | Wang Guangang;Huang Guangsheng;Liu Ke;Zhang Junlei;Jiang Bin;Tang Aitao;Pan Fusheng |
| 69 | 一种室温高塑性镁-锡-钇-锆合金及其制备方法 | 专利 | 蒋斌;王庆航;宋江凤;柴炎福;赵俊;黄光胜;张丁非;胡耀波;潘复生 |
| 70 | 含Gd的Mg-Al系合金研究现状 | 期刊论文 | 钟诗宇;张丁非;胥钧耀;赵阳;冯靖凯;蒋斌;潘复生;杨静波 |
| 71 | Grain refinement mechanism and improved mechanical properties in Mg-Sn alloy with trace Y addition | 期刊论文 | Qian X. Y.;Zeng Y.;Jiang B.;Yang Q. R.;Wan Y. J.;Quan G. F.;Pan F. S. |
| 72 | Deformation Characterization, Twinning Behavior and Mechanical Properties of Dissimilar Friction-Stir-Welded AM60/AZ31 Alloys Joint During the Three-Point Bending | 期刊论文 | Zhang Junlei;Liu Han;Chen Xiang;Zou Qin;Huang Guangsheng;Jiang Bin;Tang Aitao;Pan Fusheng |
| 73 | 一种薄壁杯形件的旋转拉深成形模具 | 专利 | 樊洪智;薛勇;张治民;王强;李旭斌;徐健;方敏;张慧芳 |
| 74 | Non-uniform deformation behavior of dissimilar friction stir welded AM60/ AZ31 joint and its influence on fracture | 期刊论文 | Zhang Junlei;Chen Xiang;Liu Shuaishuai;Huang Guangsheng;Jiang Bin;Tang Aitao;Pan Fusheng |
| 75 | 设计AZ91层合板以实现强韧性结合(英文) | 期刊论文 | 陈祥;王伟璋;张军磊;黄光胜;刘帅帅;汤爱涛;蒋斌;潘复生 |
| 76 | Effects of Zn and Ca addition on microstructure and mechanical properties of as-extruded Mg-1.0Sn alloy sheet | 期刊论文 | Chai Yanfu;Jiang Bin;Song Jiangfeng;Liu Bo;Huang Guangsheng;Zhang Dingfei;Pan Fusheng |
| 77 | Twinning, grain orientation, and texture variations in Mg alloy processed by pre-rolling | 期刊论文 | Yang Qingshan;Dai Qingwei;Lou Chao;Dai Jiahong;Zhang Jianyue;Jiang Bin;Pan Fusheng |
| 78 | Mn的添加协同提升挤压态Mg-Gd-Zn合金强度与塑性研究(英文) | 期刊论文 | 赵俊;蒋斌;宋燕;戴作财;卢立伟;何超;黄光胜;张丁非;潘复生 |
| 79 | Simultaneously improved strength and toughness of a Mg?Sn alloy through abundant prismatic lath-shaped precipitates | 期刊论文 | Wan Y. J.;Zeng Y.;Zeng Q.;Song B.;Huang X. F.;Qian X. Y.;Jiang B. |
| 80 | Effect of rolling paths and pass reductions on the microstructure and texture evolutions of AZ31 sheet with an initial asymmetrical texture distribution | 期刊论文 | He Junjie;Mao Yong;Gao Yuping;Xiong Kai;Jiang Bin;Pan Fusheng |
| 81 | Texture optimization on Mg sheets by preparing soft orientations of extension twinning for rolling | 期刊论文 | He Junjie;Mao Yong;Lu Shenglai;Xiong Kai;Zhang Shunmeng;Jiang Bin;Pan Fusheng |
查看更多信息请先登录或注册
