| 1 |
73 mm-diameter bulk metallic glass rod by copper mould casting
|
期刊论文 |
Lou, H. B.|Wang, X. D.|Xu, F.|Ding, S. Q.|Cao, Q. P.|Hono, K.|Jiang, J. Z.| |
| 2 |
Microstructure and strengthening mechanisms in cold-drawn pearlitic steel wire
|
期刊论文 |
Xiaodan Zhang;Andy Godfrey;Xiaoxu Huang;Niels Hansen;Qing Liu |
| 3 |
Fatigue cracking at twin boundary: Effect of dislocation reactions
|
期刊论文 |
Zhang Z. J.;Li L. L.;Zhang P.;Zhang Z. F. |
| 4 |
316L Austenite Stainless Steels Strengthened by Means of Nano-scale Twins
|
期刊论文 |
Liu G. Z.;Tao N. R.;Lu K. |
| 5 |
Microstructures and Mechanical Properties of Al/Mg Alloy Multilayered Composites Produced by Accumulative Roll Bonding
|
期刊论文 |
Liu H. S.;Zhang B.;Zhang G. P. |
| 6 |
Atomistic mechanisms of microstructure evolution in nanotwinned polycrystals
|
期刊论文 |
Qu Shaoxing;Zhou Haofei |
| 7 |
Micro-and Nanoscale Metallic Glassy Fibers
|
期刊论文 |
Yi Jun;Xia Xing Xiang;Zhao De Qian;Pan Ming Xiang;Bai Hai Yang;Wang Wei Hua |
| 8 |
Strain hardening behavior of a two-phase Cu-Ag alloy processed by high-pressure torsion
|
期刊论文 |
Tian, Y. Z.|Wu, S. D.|Zhang, Z. F.|Figueiredo, R. B.|Gao, N.|Langdon, T. G.| |
| 9 |
Design of ductile bulk metallic glasses by adding ``soft'' atoms
|
期刊论文 |
N. Zheng|N. Zheng|R. T. Qu|R. T. Qu|S. Pauly|S. Pauly|M. Calin|M. Calin|T. Gemming|T. Gemming|Z. F. Zhang|Z. F. Zhang|J. Eckert|J. Eckert| |
| 10 |
Effects of stacking fault energy, strain rate and temperature on microstructure and strength of nano structured Cu-Al alloys subjected to plastic deformation
|
期刊论文 |
Zhang Y.;Tao N. R.;Lu K. |
| 11 |
Quantitative defect evolution of nanocrystalline nickel during cold rolling
|
期刊论文 |
Ni, H. T.|Zhang, X. Y.| |
| 12 |
Bulk eutectic Cu-Ag alloys with abundant twin boundaries
|
期刊论文 |
Tian Y. Z.;Zhang Z. F. |
| 13 |
Microstructure and mechanical properties of friction stir welded dissimilar Mg alloys of ZK60–AZ31
|
期刊论文 |
Dejia Liu;Renlong Xin;Xuan Zheng;Zheng Zhou;Qing Liu |
| 14 |
Structure and mechanical properties of Saxidomus purpuratus biological shells
|
期刊论文 |
Sun Xin-Yuan;Jiang Da-Guo;Chen Shi-Wei;Zheng Guo-Tai;Huang Shi-Ming;Gu Mu;Zhang Zhi-Jun;Zhao Jing-Tai |
| 15 |
Revealing the Maximum Strength in Nanotwinned Copper
|
期刊论文 |
L. Lu;X. Chen;X. Huang;K. Lu |
| 16 |
Hardening by twin boundary during nanoindentation in nanocrystals
|
期刊论文 |
Qu Shaoxing;Zhou Haofei |
| 17 |
Stability of interfaces in a multilayered Ag–Cu composite during cold rolling
|
期刊论文 |
Y. Z. Tian|Y. Z. Tian|Z. F. Zhang|Z. F. Zhang| |
| 18 |
等通道转角挤压过程中fcc金属的微观结构演化与力学性能
|
期刊论文 |
吴世丁;安祥海;韩卫忠;屈伸;张哲峰 |
| 19 |
Effect of aging precipitation on mechanical anisotropy of an extruded Mg–Y–Nd alloy
|
期刊论文 |
Renlong Xin;Bo Song;Ke Zeng;Guangjie Huang;Qing Liu |
| 20 |
Contribution of grain boundary sliding in low-temperature superplasticity of ultrafine-grained aluminum alloys
|
期刊论文 |
Liu F. C.;Ma Z. Y. |
| 21 |
High tensile ductility via enhanced strain hardening in ultrafine-grained Cu
|
期刊论文 |
Xue P.;Xiao B. L.;Ma Z. Y. |
| 22 |
Grain orientation dependence of deformation twinning in pure Cu subjected to dynamic plastic deformation
|
期刊论文 |
Hong, C. S.|Lu, K.|Huang, X.|Tao, N. R.| |
| 23 |
Effects of coherency stress and vacancy sources/sinks on interdiffusion across coherent multilayer interfaces – Part I: Theory
|
期刊论文 |
H. Wan|Y. Shen|X. Jin|Y. Chen|J. Sun| |
| 24 |
Analysis on shear deformation mechanism of metallic glass under confined bending test
|
期刊论文 |
Zhang, Z. F.|Zhao, J. X.|Wu, F. F.| |
| 25 |
The effect of nanoscale twin boundaries on fracture toughness in nanocrystalline Ni
|
期刊论文 |
Zhou Haofei;Qu Shaoxing |
| 26 |
Fiber metallic glass laminates
|
期刊论文 |
Fan, J.T.|Wang, W.H.|Lu, J.|Sun, B.A.|Cheung, K.P.| |
| 27 |
Tensile fracture dynamics and intrinsic plasticity of metallic glasses
|
期刊论文 |
Cui J.W.;Calin M.;Eckert J.;Zhang Z.F. |
| 28 |
Enhanced reactive diffusion of Zn in a nanostructured Fe produced by means of surface mechanical attrition treatment
|
期刊论文 |
Wang H. L.;Wang Z. B.;Lu K. |
| 29 |
On strain-localized damage in nanoscale Cu-Ta multilayers on a flexible substrate
|
期刊论文 |
Zhu, X. F.|Li, Y. P.|Zhang, G. P.|Zhu, S. J.| |
| 30 |
Tensile and low-cycle fatigue properties of Mg-2.8% Al-1.1% Zn-0.4% Mn alloy along the transverse and rolling directions
|
期刊论文 |
Lv F.;Yang F.;Duan Q. Q.;Luo T. J.;Yang Y. S.;Li S. X.;Zhang Z. F. |
| 31 |
Comparison of compressive deformation and fracture behaviors of Zr- and Ti-based metallic glasses with notches
|
期刊论文 |
Zhao, J. X.|Zhang, Z. F.| |
| 32 |
Achieving macroscopic tensile plasticity of monolithic bulk metallic glass by surface treatment
|
期刊论文 |
Qu R. T.;Zhang Q. S.;Zhang Z. F. |
| 33 |
A predictive model for microstructure evolution in metallic multilayers with immiscible constituents
|
期刊论文 |
Haibo Wan|Yao Shen|Jian Wang|Zhiqiang Shen|Xuejun Jin| |
| 34 |
High-cycle fatigue and fracture behaviours of Cu-Be alloy with a wide strength range
|
期刊论文 |
Pang, J.C.|Li, S.X.|Zhang, Z.F.| |
| 35 |
Enhancement of mechanical properties of heat-resistant martensitic steel processed by equal channel angular pressing
|
期刊论文 |
Zhang, Z. F.|Yang, G.|Zhang, L. Y.|Hu, C.|Wu, S. D.|Huang, C. X.|Wang, C.| |
| 36 |
Microstructures and tensile deformation behavior of Cu-16 wt.% Ag binary alloy
|
期刊论文 |
Tian Y. Z.;Zhang Z. F. |
| 37 |
METALLIC MATERIALS WITH NANO-SCALE TWINS
|
期刊论文 |
Lu Lei;Lu Ke |
| 38 |
Rapid hardening induced by electric pulse annealing in nanostructured pure aluminum
|
期刊论文 |
Zeng Wei;Shen Yao;Zhang Ning;Huang Xiaoxu;Wang Jeff;Tang Guoyi;Shan Aidang |
| 39 |
Metallic glasses: Notch-insensitive materials
|
期刊论文 |
Qu R. T.;Calin M.;Eckert J.;Zhang Z. F. |
| 40 |
The growth of carbon nanotubes in aluminum powders by the catalytic pyrolysis of polyethylene glycol
|
期刊论文 |
Cao Linlin;Li Zhiqiang;Fan Genlian;Jiang Lin;Zhang Di;Moon Won-Jin;Kim Yang-Soo |
| 41 |
Reinforcement with graphene nanosheets in aluminum matrix composites
|
期刊论文 |
Wang Jingyue;Li Zhiqiang;Fan Genlian;Pan Huanhuan;Chen Zhixin;Zhang Di |
| 42 |
Effect of friction stir welding parameters on the microstructure and mechanical properties of the dissimilar Al–Cu joints
|
期刊论文 |
Xue P.;Ni D. R.;Wang D.;Xiao B. L.;Ma Z. Y. |
| 43 |
Effects of equal channel angular pressing on the strength and toughness of Al-Cu alloys
|
期刊论文 |
Fang, D. R.|Tian, Y. Z.|Duan, Q. Q.|Wu, S. D.|Zhang, Z. F.|Zhao, N. Q.|Li, J. J.| |
| 44 |
Formation mechanisms of cyclic saturation dislocation patterns in [001], [011] and [(1)over-bar 1 1] copper single crystals
|
期刊论文 |
Li P.;Li S. X.;Wang Z. G.;Zhang Z. F. |
| 45 |
Enhanced fracture toughness of bulk nanocrystalline Cu with embedded nanoscale twins
|
期刊论文 |
Lu, K.|Qin, E. W.|Tao, N. R.|Lu, L.| |
| 46 |
Cyclic deformation and fatigue cracking behaviors of Cu-28wt%Ag binary alloy
|
期刊论文 |
Tian Y. Z.;Zhang Z. F.;Wang Z. G. |
| 47 |
Effect of sample size on ductility of metallic glass
|
期刊论文 |
Eckert, J.|Wu, F. F.|Mao, S. X.|Zhang, Z. F.| |
| 48 |
Can nanoscale twin boundaries serve as dislocation sources in single crystals?
|
期刊论文 |
Qu Shaoxing;Wang Guimin;Zhou Haofei;Huang Zhilong |
| 49 |
Observation of twins in polycrystalline cobalt containing face-center-cubic and hexagonal-close-packed phases
|
期刊论文 |
Zhu Y.T.;Zhang X.Y.;Liu Q. |
| 50 |
Zinc-based bulk metallic glasses
|
期刊论文 |
Zhao, K.|Xi, X.K.|Wang, W.H.|Jiao, W.|Zhao, D.Q.|Pan, M.X.| |
| 51 |
Achieving high strain rate superplasticity in Mg–Zn–Y–Zr alloy produced by friction stir processing
|
期刊论文 |
Q. Yang;B.L. Xiao;Z.Y. Ma;R.S. Chen |
| 52 |
Fatigue properties of rolled magnesium alloy (AZ31) sheet: Influence of specimen orientation
|
期刊论文 |
Lv, F.|Yang, F.|Duan, Q. Q.|Yang, Y. S.|Wu, S. D.|Li, S. X.|Zhang, Z. F.| |
| 53 |
Quantifying the Microstructures of Pure Cu Subjected to Dynamic Plastic Deformation at Cryogenic Temperature
|
期刊论文 |
Yan F.;Zhang H. W.;Tao N. R.;Lu K. |
| 54 |
Enhanced strength-ductility synergy in nanostructured Cu and Cu-Al alloys processed by high-pressure torsion and subsequent annealing
|
期刊论文 |
An, X. H.|Wu, S. D.|Zhang, Z. F.|Figueiredo, R. B.|Gao, N.|Langdon, T. G.| |
| 55 |
Improving tensile and compressive properties of magnesium alloy plates by pre-cold rolling
|
期刊论文 |
Song Bo;Xin Renlong;Chen Gang;Zhang Xiyan;Liu Qing |
| 56 |
Formation mechanism of in situ Al3Ti in Al matrix during hot pressing and subsequent friction stir processing
|
期刊论文 |
Zhang Q.;Xiao B. L.;Wang D.;Ma Z. Y. |
| 57 |
Effects of coherency stress and vacancy sources/sinks on interdiffusion across coherent multilayer interfaces – Part II: Interface sharpening and intermixing rate
|
期刊论文 |
H. Wan|Y. Shen|X. Jin|Y. Chen|J. Sun| |
| 58 |
A plastic Zr–Cu–Ag–Al bulk metallic glass
|
期刊论文 |
X. Wang;Q. P. Cao;Y. M. Chen;K. Hono;C. Zhong;Q. K. Jiang;X. P. Nie;L. Y. Chen;X. D. Wang;J. Z. Jiang |
| 59 |
Strain rate and texture effects on microstructural characteristics of Mg-3Al-1Zn alloy during compression
|
期刊论文 |
Wang Bingshu;Xin Renlong;Huang Guangjie;Liu Qing |
| 60 |
Achieving friction stir welded pure copper joints with nearly equal strength to the parent metal via additional rapid cooling
|
期刊论文 |
Xue P.;Xiao B. L.;Zhang Q.;Ma Z. Y. |
| 61 |
Cyclic deformation and fatigue damage behaviors of [(1)over-bar414] oriented Ag single crystal
|
期刊论文 |
Li P.;Zhang Z. F.;Li S. X.;Wang Z. G. |
| 62 |
Tantalum based bulk metallic glasses
|
期刊论文 |
Zhao, D. Q.|Ding, D. W.|Pan, M. X.|Wang, W. H.|Bai, H. Y.|Meng, D.|Yi, J.| |
| 63 |
Tensile behavior of columnar grained Cu with preferentially oriented nanoscale twins
|
期刊论文 |
You Zesheng;Lu Lei;Lu Ke |
| 64 |
Fatigue behavior of columnar-grained Cu with preferentially oriented nanoscale twins
|
期刊论文 |
Pan Q.S.;Lu Q.H.;Lu L. |
| 65 |
Texture effect on corrosion behavior of AZ31 Mg alloy in simulated physiological environment
|
期刊论文 |
Xin Renlong;Luo Yuanming;Zuo Ailing;Gao Jiacheng;Liu Qing |
| 66 |
Formation of fivefold deformation twins in an ultrafine-grained copper alloy processed by high-pressure torsion
|
期刊论文 |
An, X. H.|Lin, Q. Y.|Wu, S. D.|Zhang, Z. F.|Figueiredo, R. B.|Gao, N.|Langdon, T. G.| |
| 67 |
High-resolution electron microscopy study of the twin boundary and twinning dislocation analysis in deformed polycrystalline cobalt
|
期刊论文 |
X. Y. Zhang|J. Tu|Q. Liu| |
| 68 |
Mechanisms of fracture and inhomogeneous deformation on transverse tensile test of friction-stir-processed AZ31 Mg alloy
|
期刊论文 |
Xin Renlong;Liu Dejia;Li Bo;Sun Liyun;Zhou Zheng;Liu Qing |
| 69 |
The influence of stacking fault energy on the mechanical properties of nanostructured Cu and Cu-Al alloys processed by high-pressure torsion
|
期刊论文 |
An, X. H.|Lin, Q. Y.|Wu, S. D.|Zhang, Z. F.|Figueiredo, R. B.|Gao, N.|Langdon, T. G.| |
| 70 |
Delaying premature local necking of high-strength Cu: A potential way to enhance plasticity
|
期刊论文 |
Liu H. S.;Zhang B.;Zhang G. P. |
| 71 |
Elevated temperature tensile properties and thermal expansion of CNT/2009Al composites
|
期刊论文 |
Liu Z. Y.;Xiao B. L.;Wang W. G.;Ma Z. Y. |
| 72 |
Macroscopic tensile plasticity of bulk metallic glass through designed artificial defects
|
期刊论文 |
Qu, R. T.|Zhao, J. X.|Stoica, M.|Eckert, J.|Zhang, Z. F.| |
| 73 |
Enhancing strength and ductility of Mg-12Gd-3Y-0.5Zr alloy by forming a bi-ultrafine microstructure
|
期刊论文 |
Yang H. J.;An X. H.;Shao X. H.;Yang X. M.;Li S. X.;Wu S. D.;Zhang Z. F. |
| 74 |
Nucleation and thickening of shear bands in nano-scale twin/matrix lamellae of a Cu–Al alloy processed by dynamic plastic deformation
|
期刊论文 |
C.S. Hong;N.R. Tao;X. Huang;K. Lu |
| 75 |
Strengthening austenitic steels by using nanotwinned austenitic grains
|
期刊论文 |
Lu K.;Yan F. K.;Wang H. T.;Tao N. R. |
| 76 |
The effect of stacking fault energy on equilibrium grain size and tensile properties of nanostructured copper and copper–aluminum alloys processed by equal channel angular pressing
|
期刊论文 |
C. X. Huang;W. Hu;G. Yang;Z. F. Zhang;S. D. Wu;Q. Y. Wang;G. Gottstein |
| 77 |
Assessment of tearing resistance of ductile metals: Using a new concept of tearing toughness
|
期刊论文 |
Li C. H.;Duan Q. Q.;Zhang Z. F. |
| 78 |
Comparison of microstructures and mechanical properties of a Cu-Ag alloy processed using different severe plastic deformation modes
|
期刊论文 |
Tian, Y. Z.|Wu, S. D.|Zhang, Z. F.|Figueiredo, R. B.|Gao, N.|Langdon, T. G.| |
| 79 |
Strengthening an austenitic Fe–Mn steel using nanotwinned austenitic grains
|
期刊论文 |
H.T. Wang;N.R. Tao;K. Lu |
| 80 |
Microstructure evolution and mechanical properties of nanocrystalline Ni–30Fe alloy
|
期刊论文 |
H. T. Ni|X. Y. Zhang|P. Y. Li| |
| 81 |
高能球磨法制备的碳纳米管增强铝基复合材料的微观组织和力学性能
|
期刊论文 |
许世娇;肖伯律;刘振宇;王文广;马宗义 |
| 82 |
Strength–ductility combination of nanostructured Cu–Zn alloy with nanotwin bundles
|
期刊论文 |
G.H. Xiao;N.R. Tao;K. Lu |
| 83 |
Strain effects on annealing behaviours of moderately deformed nanocrystalline nickel
|
期刊论文 |
Ni, H. T.|Zhang, X. Y.|Chen, X.|Yu, L.| |
| 84 |
Atomic packing in Mg61Cu28Gd11 bulk metallic glass
|
期刊论文 |
Wang, X. D.|Lou, H. B.|Wang, S. G.|Xu, J.|Jiang, J. Z.| |
| 85 |
Intrinsic size effects in the mechanical response of taper-free nanopillars of metallic glass
|
期刊论文 |
C. Q. Chen|C. Q. Chen|Y. T. Pei|Y. T. Pei|O. Kuzmin|O. Kuzmin|Z. F. Zhang|Z. F. Zhang|E. Ma|E. Ma|J. T. M. De Hosson|J. T. M. De Hosson| |
| 86 |
Transition of Failure Mode and Enhanced Plastic Deformation of Metallic Glass by Multiaxial Confinement
|
期刊论文 |
Mao, Scott Xing-Yuan|Wu, Fu-Fa|Zhang, Zhe-Feng| |
| 87 |
Dislocation nucleation governed softening and maximum strength in nano-twinned metals
|
期刊论文 |
Li Xiaoyan;Wei Yujie;Lu Lei;Lu Ke;Gao Huajian |
| 88 |
An approach to the uniform dispersion of a high volume fraction of carbon nanotubes in aluminum powder
|
期刊论文 |
Jiang Lin;Fan Genlian;Li Zhiqiang;Kai Xizhou;Zhang Di;Chen Zhixin;Humphries Sam;Heness Greg;Yeung Wing Yiu |
| 89 |
Effect of crystal orientation on the mechanical properties and strain hardening behavior of magnesium alloy AZ31 during uniaxial compression
|
期刊论文 |
Wang Bingshu1;Xin Renlong1;Huang Guangjie1;Liu Qing1 2 |
| 90 |
Revealing Extraordinary Intrinsic Tensile Plasticity in Gradient Nano-Grained Copper
|
期刊论文 |
Fang T. H.;Li W. L.;Tao N. R.;Lu K. |
| 91 |
Influence of extrusion ratio on microstructure and texture developments of high-temperature extruded AZ31 Mg alloy
|
期刊论文 |
Li NaLi;Huang GuangJie;Xin RenLong;Liu Qing |
| 92 |
A model for volume fraction and/or particle size selection in metal matrix composites
|
期刊论文 |
X. Z. Kai|Z. Q. Li|W. L. Zhang|G. L. Fan|L. Jiang|W. J. Lu|D. Zhang| |
| 93 |
Scale-dependent fracture mode in Cu-Ni laminate composites
|
期刊论文 |
Zhu, X. F.|Zhang, G. P.|Yan, C.|Zhu, S. J.|Sun, J.| |
| 94 |
Tensile Deformation Behaviors of Cu-Ni Alloy Processed by Equal Channel Angular Pressing
|
期刊论文 |
Wang Jiangwei;Zhang Peng;Duan Qiqiang;Yang Gang;Wu Shiding;Zhang Zhefeng |
| 95 |
The application of back-scattered electron imaging for characterization of pearlitic steels
|
期刊论文 |
Guo Ning;Liu Qing;Xin YunChang;Luan BaiFeng;Zhou Zheng |
| 96 |
Fracture toughness and fatigue crack growth characteristics of nanotwinned copper
|
期刊论文 |
A. Singh;L. Tang;M. Dao;L. Lu;S. Sures |
| 97 |
Effects of hysteresis energy and mean stress on low-cycle fatigue behaviors of an extruded magnesium alloy
|
期刊论文 |
F. Lv;F. Yang;S.X. Li and Z.F. Zhang⇑ |
| 98 |
In situ Al3Ti and Al2O3 nanoparticles reinforced Al composites produced by friction stir processing in an Al-TiO2 system
|
期刊论文 |
Zhang Q.;Xiao B. L.;Wang Q. Z.;Ma Z. Y. |
| 99 |
Influence of stacking-fault energy on the accommodation of severe shear strain in Cu-Al alloys during equal-channel angular pressing
|
期刊论文 |
An Xianghai;Lin Qingyun;Qu Shen;Yang Gang;Wu Shiding;Zhang Zhe-Feng |
| 100 |
Reactive mechanism and mechanical properties of in situ composites fabricated from an Al–TiO2 system by friction stir processing
|
期刊论文 |
Q. Zhang;B.L. Xiao;W.G. Wang;Z.Y. Ma |
| 101 |
Preface to the viewpoint set on the strengthening effect of nanoscale twins
|
期刊论文 |
K. Lu|L. Lu| |
| 102 |
Formation of nanostructure and abnormal annealing behavior of a Cu–Ag–Zr alloy processed by high-pressuretorsion
|
期刊论文 |
Y. Z. Tian|Y. Z. Tian|J. Freudenberger|J. Freudenberger|R. Pippan|R. Pippan|Z. F. Zhang|Z. F. Zhang| |
| 103 |
Shear band evolution during large plastic deformation of brittle and ductile metallic glasses
|
期刊论文 |
J. W. Cui;R. T. Qu;Fufa Wu;Zhefeng Zhang;Baolong Shen;Mao Stoica;Juergen Eckert |
| 104 |
Tensile and fatigue properties of ultrafine Cu-Ni multilayers
|
期刊论文 |
X. F. Zhu;G. P. Zhang |
| 105 |
Correlation Between Texture Variation and Transverse Tensile Behavior of Friction-Stir-Processed AZ31 Mg Alloy
|
期刊论文 |
R. Xin|B. Li|A. Liao|Z. Zhou|Q. Liu| |
| 106 |
Effect of iron content on mechanical behavior of nanocrystalline nickel and alloys
|
期刊论文 |
Ni H. T.;Zhang X. Y. |
| 107 |
Effect of orientation on the cyclic deformation behavior of silver single crystals: Comparison with the behavior of copper and nickel single crystals
|
期刊论文 |
Li P.;Zhang Z. F.;Li X. W.;Li S. X.;Wang Z. G. |
| 108 |
A plastic damage model for finite element analysis of cracking of silicon under indentation
|
期刊论文 |
Haibo Wan|Yao Shen|Qiulong Chen|Youxing Chen| |
| 109 |
Enhanced plastic deformation in a metallic glass induced by notches
|
期刊论文 |
Wu, F. F.|Li, S. X.|Zhang, Z. F.|Zhao, J. X.|Qu, R. T.| |
| 110 |
Interfacial diffusion in a nanostructured Cu produced by means of dynamic plastic deformation
|
期刊论文 |
H.L. Wang;Z.B. Wang;K. Lu |
| 111 |
Tensile fracture morphologies of bulk metallic glass
|
期刊论文 |
Stoica, M.|Qu, R. T.|Eckert, J.|Zhang, Z. F.| |
| 112 |
Temperature effect on rolling behavior of nano-twinned copper
|
期刊论文 |
Z.S. You;L. Lu;K. Lu |
| 113 |
Effects of Route on Microstructural Evolution and Mechanical Properties of Cu-8 Wt Pct Ag Alloy Processed by Equal Channel Angular Pressing
|
期刊论文 |
Tian, Yan-Zhong|Duan, Qi-Qiang|Yang, Hua-Jie|Zou, He-Fei|Yang, Gang|Wu, Shi-Ding|Zhang, Zhe-Feng| |
| 114 |
Enhanced toughness and fatigue strength of cold roll bonded Cu/Cu laminated composites with mechanical contrast
|
期刊论文 |
H. S. Liu;B. Zhang;G. P. Zhang |
| 115 |
Comparative investigation of strength and plastic instability in Cu/Au and Cu/Cr multilayers by indentation
|
期刊论文 |
Li Y. P.;Zhu X. F.;Tan J.;Wu B.;Wang W.;Zhang G. P. |
| 116 |
General relation between tensile strength and fatigue strength of metallic materials
|
期刊论文 |
Pang J. C.;Li S. X.;Wang Z. G.;Zhang Z. F. |
| 117 |
Blocking effect of twin boundaries on partial dislocation emission from void surfaces
|
期刊论文 |
Lifeng Zhang|Haofei Zhou|Shaoxing Qu| |
| 118 |
Kinetics and size effect of grain rotations in nanocrystals with rounded triple junctions
|
期刊论文 |
Fan Yang;Wei Yang |
| 119 |
High volume fraction and uniform dispersion of carbon nanotubes in aluminium powders
|
期刊论文 |
Li Zhiqiang;Jiang Lin;Fan Genlian;Xu Yong;Zhang Di;Chen Zhixin;Humphries S. |
| 120 |
Fundamental factors on formation mechanism of dislocation arrangements in cyclically deformed fcc single crystals
|
期刊论文 |
Li, P.|Li, S. X.|Wang, Z. G.|Zhang, Z. F.| |
| 121 |
Plastic anisotropy and associated deformation mechanisms in nanotwinned metals
|
期刊论文 |
You Zesheng;Li Xiaoyan;Gui Liangjin;Lu Qiuhong;Zhu Ting;Gao Huajian;Lu Lei |
| 122 |
Growth of deformation twins in room-temperature rolled nanocrystalline nickel
|
期刊论文 |
Zhang X. Y.;Wu X. L.;Zhu A. W. |
| 123 |
Direct observations on the evolution of shear bands into cracks in metallic glass
|
期刊论文 |
Qu, Rui-Tao|Wu, Fu-Fa|Zhang, Zhe-Feng|Eckert, Juergen| |
| 124 |
Effect of ball-milling time on mechanical properties of carbon nanotubes reinforced aluminum matrix composites
|
期刊论文 |
Liu Z. Y.;Xu S. J.;Xiao B. L.;Xue P.;Wang W. G.;Ma Z. Y. |
| 125 |
Optimizing strength and ductility of Cu–Zn alloys through severe plastic deformation
|
期刊论文 |
Zhang P.;An X.H.;Zhang Z.J.;Wu S.D.;Li S.X.;Zhang Z.F.;Figueiredo R.B.;Gao N.;Langdon T.G. |
| 126 |
Microstructures, strengthening mechanisms and fracture behavior of Cu-Ag alloys processed by high-pressure torsion
|
期刊论文 |
Tian, Y. Z.|Li, J. J.|Zhang, P.|Wu, S. D.|Zhang, Z. F.|Kawasaki, M.|Langdon, T. G.| |
| 127 |
Molecular Dynamics Simulation of the Interaction Between Nanoscale Twin Boundaries and Partial Dislocations
|
期刊论文 |
Zhou Haofei;Qu Shaoxing |
| 128 |
Enhanced chromizing kinetics of tool steel by means of surface mechanical attrition treatment
|
期刊论文 |
Lu, K.|Lu, S. D.|Wang, Z. B.| |
| 129 |
Strain-induced Microstructure Refinement in a Tool Steel Subjected to Surface Mechanical Attrition Treatment
|
期刊论文 |
Lu, Ke|Wang, Zhenbo|Lu, Shoudan| |
| 130 |
Dry sliding tribological properties of nanostructured copper subjected to dynamic plastic deformation
|
期刊论文 |
Yao B.;Han Z.;Li Y. S.;Tao N. R.;Lu K. |
| 131 |
Deformation, structural changes and damage evolution in nanotwinned copper under repeated frictional contact sliding
|
期刊论文 |
Singh A.;Dao M.;Lu L.;Suresh S. |
| 132 |
Significance of stacking fault energy on microstructural evolution in Cu and Cu-Al alloys processed by high-pressure torsion
|
期刊论文 |
An, X. H.|Lin, Q. Y.|Wu, S. D.|Zhang, Z. F.|Figueiredo, R. B.|Gao, N.|Langdon, T. G.| |
| 133 |
Higher fatigue cracking resistance of twin boundaries than grain boundaries in Cu bicrystals
|
期刊论文 |
Li L. L.;Zhang Z. J.;Zhang P.;Zhang Z. F. |
| 134 |
Annealing-induced Grain Refinement in a Nanostructured Ferritic Steel
|
期刊论文 |
L.M. Wang;Z.B. Wang;S. Guo;K. Lu |
| 135 |
Microstructural evolution and shear fracture of Cu-16 at.% Al alloy induced by equal channel angular pressing
|
期刊论文 |
An X. H.;Lin Q. Y.;Wu S. D.;Zhang Z. F. |
| 136 |
Stress relaxation and the structure size-dependence of plastic deformation in nanotwinned copper
|
期刊论文 |
Lu Lei;Zhu Ting;Shen Yongfeng;Dao Ming;Lu K.;Suresh Subra |
| 137 |
Evaluation of plastic deformation ability of Cu/Ni/W metallic multilayers
|
期刊论文 |
J.W. Yan;X.F. Zhu;G.P. Zhang;C. Yan |
| 138 |
Temperature effect on critical shear stress for twin boundary migration
|
期刊论文 |
Zhou Haofei;Zhang Lifeng;Qu Shaoxing |
| 139 |
Competing grain-boundary- and dislocation-mediated mechanisms in plastic strain recovery in nanocrystalline aluminum
|
期刊论文 |
Li Xiaoyan;Wei Yujie;Yang Wei;Gao Huajian |
| 140 |
Research on the Al/Mg/Al Three-layer Clad Sheet Fabricated by Hot Roll Bonding Technology
|
期刊论文 |
Chen Zejun;Zeng Zhen;Huang Guangjie;Liu Qing |
| 141 |
Tearing toughness of annealed Cu-Al alloy sheets with different Al contents
|
期刊论文 |
Li, C. H.|Duan, Q. Q.|Qu, S.|Zhang, Z. F.| |
| 142 |
Growth of carbon nanospheres through a building block assembly method at 300 °C
|
期刊论文 |
X. Xu|Z. Li|D. Zhang|Z. Chen| |
| 143 |
Grain size effects on the austenitization process in a nanostructured ferritic steel
|
期刊论文 |
L. M. Wang;Z. B. Wang;K. Lu |
| 144 |
Interfacial diffusion in Cu with a gradient nanostructured surface layer
|
期刊论文 |
Lu, K.|Wang, Z. B.|Wilde, G.|Divinski, S. V.| |
| 145 |
Microstructure evolution and mechanical property of nanocrystalline Ni–20Fe alloy during cold rolling
|
期刊论文 |
H. T. Ni|X. Y. Zhang| |
| 146 |
Deformation behavior and enhanced plasticity of Ti-based metallic glasses with notches
|
期刊论文 |
Wu, F. F.|Li, S. X.|Zhao, J. X.|Qu, R. T.|Zhang, Z. F.| |
| 147 |
Plastic deformability of metallic glass by artificial macroscopic notches
|
期刊论文 |
Qu, R. T.|Zhang, Z. F.|Zhao, J. X.|Wu, F. F.|Li, S. X.| |
| 148 |
Basal-plane stacking-fault energies of Mg: A first-principles study of Li- and Al-alloying effects
|
期刊论文 |
J. Han;X. M. Su;Z. H. Jin;Y. T. Zhu |
| 149 |
deformation twinning in pure Ti during dynamic plastic deformation
|
期刊论文 |
Xu Feng1;Zhang Xiyan1;Ni Haitao1;Liu Qing1 |
| 150 |
Microstructural evolution and mechanical properties of Cu-Al alloys subjected to equal channel angular pressing
|
期刊论文 |
Qu S.;An X. H.;Yang H. J.;Huang C. X.;Yang G.;Zang Q. S.;Wang Z. G.;Wu S. D.;Zhang Z. F. |
| 151 |
Evolution of microstructural homogeneity in copper processed by high-pressure torsion
|
期刊论文 |
An, X. H.|Wu, S. D.|Zhang, Z. F.|Figueiredo, R. B.|Gao, N.|Langdon, T. G.| |
| 152 |
The origin of non-uniform microstructure and its effects on the mechanical properties of a friction stir processed Al–Mg alloy
|
期刊论文 |
G. R. Cui|Z. Y. Ma|S. X. Li| |
| 153 |
Effects of dislocation slip mode on high-cycle fatigue behaviors of ultrafine-grained Cu-Zn alloy processed by equal-channel angular pressing
|
期刊论文 |
Zhang, Z. J.|An, X. H.|Zhang, P.|Yang, M. X.|Yang, G.|Wu, S. D.|Zhang, Z. F.| |
| 154 |
Nanoscale structural refinement via deformation twinning in face-centered cubic metals
|
期刊论文 |
Lu, K.|Tao, N. R.| |
| 155 |
Effects of stacking fault energy on the thermal stability and mechanical properties of nanostructured Cu-Al alloys during thermal annealing
|
期刊论文 |
An, X. H.|Qu, S.|Wu, S. D.|Zhang, Z. F.| |
| 156 |
Tensile fracture criterion of metallic glass
|
期刊论文 |
Qu, R. T.|Zhang, Z. F.|Eckert, J.| |
| 157 |
Deformation and fracture behaviors of Co-based metallic glass and its composite with dendrites
|
期刊论文 |
Mao, S. X.|Zhang, Z. F.|Fan, J. T.|Inoue, A.|Shen, B. L.| |
| 158 |
Development of high-strength magnesium alloys via combined processes of extrusion, rolling and ageing
|
期刊论文 |
Li R.G.1;Nie J.F.1 2;Huang G.J.1;Xin Y.C.1;Liu Q.1 |
| 159 |
A new constitutive model for HCP metals
|
期刊论文 |
Gao CY;Zhang LC;Yan HX |
| 160 |
Toughening by nano-scaled twin boundaries in nanocrystals
|
期刊论文 |
Zhou Haofei;Qu Shaoxing;Yang Wei |
| 161 |
Size effects and strength fluctuation in nanoscale plasticity
|
期刊论文 |
Wang Wei;Zhong Yuan;Lu K.;Lu Lei;McDowell David L.;Zhu Ting |
| 162 |
Effects of strain rate and temperature on microstructure and texture for AZ31 during uniaxial compression
|
期刊论文 |
Xin Ren-Long;Wang Bing-Shu;Zhou Zheng;Huang Guang-Jie;Liu Qing |
| 163 |
Glass forming ability and crystallization of Zr–Cu–Ag–Al–Be bulk metallic glasses
|
期刊论文 |
F. Xu|H. B. Lou|X. D. Wang|S. Q. Ding|Q. P. Cao|J. Z. Jiang| |
| 164 |
Tensile and fatigue properties of ultrafine-grained low-carbon steel processed by equal channel angular pressing
|
期刊论文 |
Pang, J. C.|Yang, M. X.|Yang, G.|Wu, S. D.|Li, S. X.|Zhang, Z. F.| |
| 165 |
Direct observations of microstructural evolution in a two-phase Cu-Ag alloy processed by high-pressure torsion
|
期刊论文 |
Tian, Y. Z.|An, X. H.|Wu, S. D.|Zhang, Z. F.|Figueiredo, R. B.|Gao, N.|Langdon, T. G.| |
| 166 |
Strengthening and toughening of magnesium alloy by {1 0 −1 2} extension twins
|
期刊论文 |
Y. Xin|M. Wang|Z. Zeng|M. Nie|Q. Liu| |
| 167 |
Effects of Impurity on Microstructure and Hardness in Pure Al Subjected to Dynamic Plastic Deformation at Cryogenic Temperature
|
期刊论文 |
Huang F.;Tao N. R.;Lu K. |
| 168 |
On intrinsic brittleness and ductility of intergranular fracture along symmetrical tilt grain boundaries in copper
|
期刊论文 |
Y. Cheng;Z. H. Jin;Y.W. Zhang;H. Gao |
| 169 |
Quantitative Characterization of Partial Dislocations in Nanocrystalline Metals
|
期刊论文 |
Ni Hai-Tao;Zhang Xi-Yan;Zhu Yu-Tao |
| 170 |
Shear banding observations in Cu-16 wt.% Ag alloy subjected to one-pass equal channel angular pressing
|
期刊论文 |
Tian, Y. Z.|Tian, Y. Z.|Han, W. Z.|Han, W. Z.|Yang, H. J.|Yang, H. J.|Li, S. X.|Li, S. X.|Wu, S. D.|Wu, S. D.|Zhang, Z. F.|Zhang, Z. F.| |
| 171 |
Strong and ductile carbon nanotube/aluminum bulk nanolaminated composites with two-dimensional alignment of carbon nanotubes
|
期刊论文 |
Jiang Lin;Li Zhiqiang;Fan Genlian;Cao Linlin;Zhang Di |
| 172 |
Indentation of nanotwinned fcc metals: Implications for nanotwin stability
|
期刊论文 |
Bezares Jiddu;Jiao Shuyin;Liu Yue;Bufford Daniel;Lu Lei;Zhang Xinghang;Kulkarni Yashashree;Asaro Robert J. |
| 173 |
Correlation between onset of yielding and free volume in metallic glasses
|
期刊论文 |
Wang, W.H.|Nieh, T.G.|Song, S.X.|Zhao, D.Q.|Pan, M.X.|Wang, J.G.| |
| 174 |
Effect of initial texture on dynamic recrystallization of AZ31 Mg alloy during hot rolling
|
期刊论文 |
Wang Maoyin;Xin Renlong;Wang Bingshu;Liu Qing |
| 175 |
Study on dislocation slips in ferrite and deformation of cementite in cold drawn pearlitic steel wires from medium to high strain
|
期刊论文 |
Zhang X.D.;Godfrey A.;Liu W.;Liu Q. |
| 176 |
Microstructures and strengthening mechanisms of Cu/Ni/W nanolayered composites
|
期刊论文 |
Yan, J. W.|Zhang, G. P.|Zhu, X. F.|Liu, H. S.|Yan, C.| |
| 177 |
Two-dimensional distribution of carbon nanotubes in copper flake powders
|
期刊论文 |
Tan Zhanqiu;Li Zhiqiang;Fan Genlian;Li Wenhuan;Liu Qinglei;Zhang Wang;Zhang Di |
| 178 |
Effect of crystallographic orientation and grain boundary character on fatigue cracking behaviors of coaxial copper bicrystals
|
期刊论文 |
Li L. L.;Zhang P.;Zhang Z. J.;Zhang Z. F. |
| 179 |
General relationship between strength and hardness
|
期刊论文 |
Zhang P.;Li S. X.;Zhang Z. F. |
| 180 |
On plasticity and fracture of nanostructured Cu/X (X=Au, Cr) multilayers: The effects of length scale and interface/boundary
|
期刊论文 |
Y. P. Li;G. P. Zhang |
| 181 |
Effect of pre-existing shear bands on the tensile mechanical properties of a bulk metallic glass
|
期刊论文 |
Cao Q. P.;Liu J. W.;Yang K. J.;Xu F.;Yao Z. Q.;Minkow A.;Fecht H. J.;Ivanisenko J.;Chen L. Y.;Wang X. D.;Qu S. X.;Jiang J. Z. |
| 182 |
Size dependence of rate-controlling deformation mechanisms in nanotwinned copper
|
期刊论文 |
L. Lu;M. Dao T. Zhu;J. Li |
| 183 |
Strength and ductility of 316L austenitic stainless steel strengthened by nano-scale twin bundles
|
期刊论文 |
Yan F. K.;Liu G. Z.;Tao N. R.;Lu K. |
| 184 |
A flake powder metallurgy approach to Al2O3/Al biomimetic nanolaminated composites with enhanced ductility
|
期刊论文 |
Jiang Lin;Li Zhiqiang;Fan Genlian;Zhang Di |
| 185 |
Comparisons of dry sliding tribological behaviors between coarse-grained and nanocrystalline copper
|
期刊论文 |
Li W. L.;Tao N. R.;Han Z.;Lu K. |
| 186 |
A universal fracture criterion for high-strength materials
|
期刊论文 |
Qu Rui Tao;Zhang Zhe Feng |
| 187 |
Formation of twins in polycrystalline cobalt during dynamic plastic deformation
|
期刊论文 |
Y. T. Zhu|X. Y. Zhang|H. T. Ni|F. Xu|J. Tu|C. Lou| |
| 188 |
Lattice dynamical finite-element method
|
期刊论文 |
Shen, Yao|Li, Ju|Liu, Xiaohui|Gu, Jianfeng|Chen, Changfeng| |
| 189 |
Back-scattered electron imaging combined with EBSD technique for characterization of pearlitic steels
|
期刊论文 |
Guo N.;Liu Q. |
| 190 |
Aluminizing low carbon steel at lower temperatures
|
期刊论文 |
X. Si|B. Lu|Z. Wang| |
| 191 |
Singly dispersed carbon nanotube/aluminum composites fabricated by powder metallurgy combined with friction stir processing
|
期刊论文 |
Liu Z. Y.;Xiao B. L.;Wang W. G.;Ma Z. Y. |
| 192 |
珠光体钢丝冷拉拔过程中微观组织及铁素体微区取向与织构演变
|
期刊论文 |
张晓丹|A. Godfrey|刘伟|刘庆| |
| 193 |
Microstructural evolution and mechanical properties of a two-phase Cu-Ag alloy processed by high-pressure torsion to ultrahigh strains
|
期刊论文 |
Tian, Y. Z.|Wu, S. D.|Zhang, Z. F.|Figueiredo, R. B.|Gao, N.|Langdon, T. G.| |
| 194 |
Work hardening of polycrystalline Cu with nanoscale twins
|
期刊论文 |
L. Lu;Z. S. You;K. Lu |
| 195 |
Architectured surface layer with a gradient nanotwinned structure in a Fe–Mn austenitic steel
|
期刊论文 |
H.T. Wang;N.R. Tao;K. Lu |
| 196 |
Fatigue cracking at twin boundaries: Effects of crystallographic orientation and stacking fault energy
|
期刊论文 |
Zhang Z. J.;Zhang P.;Li L. L.;Zhang Z. F. |
| 197 |
Fatigue strengths of Cu-Be alloy with high tensile strengths
|
期刊论文 |
Pang, J. C.|Duan, Q. Q.|Wu, S. D.|Li, S. X.|Zhang, Z. F.| |
| 198 |
Twin boundary: Stronger or weaker interface to resist fatigue cracking?
|
期刊论文 |
Zhang, P.|Zhang, Z. J.|Li, L. L.|Zhang, Z. F.| |
| 199 |
Tensile and Fatigue Properties of Free-Standing Cu Foils
|
期刊论文 |
C. Dai|C. Dai|X. Zhu|X. Zhu|G. Zhang|G. Zhang| |
| 200 |
A constitutive model for dynamic plasticity of FCC metals
|
期刊论文 |
GAO CY;Zhang LC |
| 201 |
Superplasticity governed by effective grain size and its distribution in fine-grained aluminum alloys
|
期刊论文 |
Ma, Z.Y. |Liu, F.C. | |
| 202 |
Structural examination of aging precipitation in a Mg-Y-Nd alloy at different temperatures
|
期刊论文 |
Xin Renlong;Li Ling;Zeng Ke;Song Bo;Liu Qing |
| 203 |
Deformation twinning in polycrystalline Co during room temperature dynamic plastic deformation
|
期刊论文 |
Zhang X. Y.;Zhu Y. T.;Liu Q. |
| 204 |
Enhanced fracture toughness and strength in bulk nanocrystalline Cu with nanoscale twin bundles
|
期刊论文 |
Qin, E. W.|Tao, N. R.|Lu, K.|Tan, J.|Lu, L.| |
| 205 |
Shear band initiation induced by slip-twin boundary interactions
|
期刊论文 |
Qu Shaoxing;Zhou Haofei;Zhilong Huang |
| 206 |
Achieving homogeneity in a two-phase Cu–Ag composite during high-pressure torsion
|
期刊论文 |
Y. Z. Tian|Y. Z. Tian|Z. F. Zhang|Z. F. Zhang|T. G. Langdon|T. G. Langdon| |
| 207 |
Piezoresistance effect of metallic glassy fibers
|
期刊论文 |
Yi, Jun|Zhao, D. Q.|Wang, W. H.|Pan, M. X.|Bai, H. Y.| |
| 208 |
二次离子质谱仪测量扩散曲线时“零曲线”的分离
|
期刊论文 |
王海丽|王镇波|卢柯| |
| 209 |
Two different types of shear-deformation behaviour in Au-Cu multilayers
|
期刊论文 |
Y. P. Li;X. F. Zhu;J. Tan;B. Wu;G. P. Zhang |
| 210 |
Investigation of deformation instability of Au/Cu multilayers by indentation
|
期刊论文 |
Y. P. Li;X. F. Zhu;G. P. Zhang;J. Tan;W. Wang;B. Wu |
| 211 |
An atomistic investigation of structural evolution in metallic glass matrix composites
|
期刊论文 |
Zhou Haofei;Qu Shaoxing;Yang Wei |
| 212 |
A universal scaling of planar fault energy barriers in face-centered cubic metals
|
期刊论文 |
Z. H. Jin;S. T. Dunham;H. Gleiter;H. Hahn;P. Gumbsch |
| 213 |
Surface effect on the screw dislocation mobility over the Peierls barrier
|
期刊论文 |
Xi Cheng|Yao Shen|Lei Zhang|Xiaohui Liu| |
| 214 |
Low-cycle fatigue-cracking mechanisms in fcc crystalline materials
|
期刊论文 |
Zhang, P.|Qu, S.|Duan, Q. Q.|Wu, S. D.|Li, S. X.|Wang, Z. G.|Zhang, Z. F.| |
| 215 |
Microstructure and mechanical properties of Cu and Cu-Zn alloys produced by equal channel angular pressing
|
期刊论文 |
Zhang, Z. J.|Duan, Q. Q.|An, X. H.|Wu, S. D.|Yang, G.|Zhang, Z. F.| |
| 216 |
Grain size dependence of tensile properties in ultrafine-grained Cu with nanoscale twins
|
期刊论文 |
Xianhua Chen;Lei Lu;Lu Ke |
| 217 |
Effects of Strain Rate and Deformation Temperature on Microstructures and Hardness in Plastically Deformed Pure Aluminum
|
期刊论文 |
Huang F.;Tao N. R.;Lu K. |
| 218 |
Deformation and fracture behaviors of Ti-based metallic glass under multiaxial stress state
|
期刊论文 |
Wu F. F.;Zheng W.;Wu S. D.;Zhang Z. F.;Shen J. |
| 219 |
Shear stability of metallic glasses
|
期刊论文 |
Wu, F. F.|Zheng, W.|Wu, S. D.|Zhang, Z. F.|Shen, J.| |
| 220 |
Serrated flow behavior induced by blunt mechanism of shear crack propagation in metallic glass
|
期刊论文 |
Mao, S. X.|Zhang, Z. F.|Eckert, J.|Fan, J. T.|Shen, B. L.| |
| 221 |
Mechanical Behaviors of Ultrafine-Grained 301 Austenitic Stainless Steel Produced by Equal-Channel Angular Pressing
|
期刊论文 |
Huang, C. X.|Yang, G.|Wang, C.|Zhang, Z. F.|Wu, S. D.| |
| 222 |
Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale
|
期刊论文 |
Ke Lu;Lei Lu;Subra Suresh |
| 223 |
Evolution of initial grain boundaries and shear bands in Cu bicrystals during one-pass equal-channel angular pressing
|
期刊论文 |
Han W. Z.;Yang H. J.;An X. H.;Yang R. Q.;Li S. X.;Wu S. D.;Zhang Z. F. |
