基于载荷谱的电动汽车传动构件疲劳寿命与系统可靠性研究

U1864210
2018
E0502.传动与驱动
苑士华
联合基金项目
教授
北京理工大学
210万元
电动汽车;系统可靠性;载荷谱;疲劳寿命;齿轮传动
2019-01-01到2022-12-31
  • 中英文摘要
  • 结题摘要
  • 结题报告
  • 项目成果
  • 项目参与人
查看更多信息请先登录或注册
查看更多信息请先登录或注册
查看更多信息请先登录或注册
重置
序号 标题 类型 作者
1 Microstructure based cracking behavior and life assessment of titanium alloy under very-high-cycle fatigue with elevated temperatures 期刊论文 Cheng Li;Wei Li;Liang Cai
2 Effect of treatment mode on microstructure evolution and mechanical properties of nickel-based superalloy fabricated by selective laser melting 期刊论文 Tianyi Hu;Rui Sun;Wei Li
3 A novel very-high-cycle-fatigue life prediction model with interior microstructure induced cracking behavior of Inconel-713C superalloy at 25 °C, 750 °C and 1000 °C 期刊论文 Xiaolong Li;Wei Li;Tianyi Hu
4 Ratchetting–multiaxial fatigue damage analysis in gear rolling contact considering tooth surface roughness 期刊论文 Boyu Zhang;Huaiju Liu;Houyi Bai
5 Analysis of the fatigue crack initiation of a wind turbine gear considering load sequence effect 期刊论文 Haifeng He;Huaiju Liu;Caichao Zhu
6 A fatigue life prediction approach for interior cracking behavior of surface-carburized steels under high-cycle and very-high-cycle fatigue 期刊论文 Cheng Li;Yucheng Zhang;Liang Cai
7 电驱动系统再生制动工况动力学特性研究 期刊论文 刘坤;杜长虹;吴维;卢国成;苑士华
8 Study on contact fatigue of a wind turbine gear pair considering surface roughness 期刊论文 Heli Liu;Huaiju Liu;Caichao Zhu
9 Vibration analysis of two-stage helical gear transmission with cracked fault based on an improved mesh stiffness model 期刊论文 Yancong Li;Shihua Yuan;Wei Wu
10 Design optimization of a wind turbine gear transmission based on fatigue reliability sensitivity 期刊论文 Genshen Liu;Huaiju Liu;Caichao Zhu
11 High cycle and very high cycle fatigue properties and microscopic crack growth modeling of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy at elevated temperatures 期刊论文 Cheng Li;Wei Li;Shihua Yuan
12 Interior crystallographic plane induced cracking behavior of Ni-based superalloy in high-temperature and vacuum environment 期刊论文 Xiaolong Li;Wei Li;Shihua Yuan
13 Study on impact characteristics of electric powertrain in regenerative braking process 期刊论文 Kun Liu;Wei Wu;Shihua Yuan
14 In-situ experimental investigation and prediction of fatigue crack growth for aluminum alloys under single overload 期刊论文 Liang Cai;Wei Li;Tianyi Hu
15 Interior long-life-fatigue cracking behavior and life prediction of a selective laser melted GH4169 superalloy at different temperatures and stress ratios 期刊论文 Rui Sun;Wei Li;Yucheng Zhang
16 Investigation of Grain Refinement Mechanism of Nickel Single Crystal during High Pressure Torsion by Crystal Plasticity Modeling 期刊论文 Peitang Wei;Hao Zhou;Huaiju Liu
17 Fatigue failure behavior and strength prediction of nickel-based superalloy for turbine blade at elevated temperature 期刊论文 Xiaolong Li;Wei Li;Muhammad Imran Lashari
18 基于材料损伤理论与磨损耦合的接触疲劳失效分析方法 专利 刘怀举;张博宇;朱才朝
19 一种基于GA-BP神经网络的齿轮接触疲劳寿命预测方法 专利 刘怀举;张秀华;吴少杰
20 飞行汽车变速器齿轮传动可靠性优化设计 期刊论文 刘根伸;刘怀举;朱才朝
21 Influence of load spectrum on contact fatigue damage of a case carburized wind turbine gear 期刊论文 Heli Liu;Huaiju Liu;Caichao Zhu
22 Faceted crack induced failure behavior and micro-crack growth based strength evaluation of titanium alloys under very high cycle fatigue 期刊论文 Wei Li;Meng Li;Xinxin Xing
23 Interior induced fatigue of surface-strengthened steel under variable loading: Failure mechanism and damage modelling 期刊论文 Wei Li;Rui Sun;Ning Gao
24 Modal characteristics of electric vehicle powertrain considering electromagnetic effect 期刊论文 Kun Liu;Wei Wu;Shihua Yuan
25 湿式离合器流场与作用力模型试验研究 期刊论文 李慎龙;吴维;胡纪滨;苑士华
26 Numerical and experimental nonlinear dynamics of a proportional pressure-regulating valve 期刊论文 Wei Wu;Chunhui Wei;Junjie Zhou;Jibin Hu;Shihua Yuan
27 Analysis of Air-Oil Flow and Heat Transfer inside a Grooved Rotating-Disk System 期刊论文 Chunming Li;Wei Wu;Yin Liu
28 An Experimental Investigation on the Wear of Lubricated Steel Against PEEK Gears 期刊论文 Guoda Yu;Huaiju Liu;Ken Mao
29 Design of multi-range hydro-mechanical transmission using modular method 期刊论文 Fangxu Liu;Wei Wu;Jibin Hu;Shihua Yuan
30 A microstructure sensitive contact fatigue model of a carburized gear 期刊论文 Huaiju Liu;Wei Wang;Caichao Zhu
31 Effect of elevated temperature on high-cycle and very-high-cycle fatigue properties of Ni-based superalloy manufactured by selective laser melting 期刊论文 Wei Li;Rui Sun;Tianyi Hu
32 一种仿真与试验载荷融合的载荷谱分析方法 专利 吴维;连春鹏;李艳聪;刘坤;苑士华
33 Contact fatigue life prediction of a bevel gear under spectrum loading 期刊论文 Pan Jia;Huaiju Liu;Caichao Zhu;Wei Wu
34 高可靠紧凑型大型废电机组齿轮箱关键技术研究与产业化 奖励 重庆大学
35 Design and control of a hydro-mechanical transmission for all-terrain vehicle 期刊论文 Wei Wu;Junlin Luo;Chunhui Wei;Hui Liu;Shihua Yuan
36 Quasi-Static Load Sharing Characteristics of a Planetary Gear Set with Planet Journal Bearings 期刊论文 Zhiqiang Guo;Shenlong Li;Wei Wu
37 Micromechanical analysis of gear fatigue-ratcheting damage considering the phase state and inclusion 期刊论文 Wei Wang;Huaiju Liu;Caichao Zhu
38 Energy efficiency of hydraulic regenerative braking for an automobile hydraulic hybrid propulsion method 期刊论文 Wei Wu;Hui Liu;Junjie Zhou
39 Multiscale analysis of interior cracking behavior of Ni-based superalloy fabricated by selective laser melting under very-high-cycle-fatigue at high-temperature 期刊论文 Tianyi Hu;Wei Li;Shihua Yuan
40 Interior microscopic cracking behavior and microstructure-fatigue based damage evaluation of case-hardened steels under variable amplitude loading 期刊论文 Wei Li;Siqi Zhou;Xiaolong Li
41 Investigation on the effect of shot peening coverage on the surface integrity 期刊论文 Qinjie Lin;Huaiju Liu;Caichao Zhu
42 Elevated-temperature gigacycle fatigue properties of nickel based superalloy: Grain related cracking mechanism and life prediction modelling 期刊论文 Xiaolong Li;Wei Li;Muhammad Imran Lashari
43 Systematic design and power management of a novel parallel hybrid electric powertrain for heavy-duty vehicles 期刊论文 Wei Wu;Junlin Luo;Tiangang Zou;Yin Liu;Shihua Yuan
44 Longitudinal-vertical dynamics of wheeled vehicle under off-road conditions 期刊论文 Zhiqiang Guo;Wei Wu;Shihua Yuan
45 一种考虑强度退化和失效模式的齿轮可靠性分析方法 专利 刘怀举;毛天雨;刘根伸
46 Microstructure related failure mechanism of selective laser melted GH4169 with interior fatigue cracking 期刊论文 Rui Sun;Wei Li;Yucheng Zhang
47 High-cycle-fatigue properties of selective-laser-melted AlSi10Mg with multiple building directions 期刊论文 Yucheng Zhang;Xiaolong Li;Shihua Yuan
48 Subsurface faceted cracking behavior of selective laser melting Ni-based superalloy under very high cycle fatigue 期刊论文 Wei Li;Rui Sun;Ping Wang
49 车辆机电传动系统耦合动力学与控制 专著 陈星;吴维
50 Subsurface crack nucleation and growth behavior and energy-based life prediction of a titanium alloy in high-cycle and very-high-cycle regimes 期刊论文 Wei Li;Xinxin Xing;Ning Gao
51 Mesh stiffness and nonlinear dynamic response of a spur gear pair considering tribo-dynamic effect 期刊论文 Zufeng Li;Caichao Zhu;Huaiju Liu
52 In-situ experimental study of fatigue crack growth behavior for aluminum alloys under variable amplitude loading: Near-tip plasticity and crack closure evaluation 期刊论文 Liang Cai;Wei Li;Zhenglin Mo
53 一种基于载荷谱的齿轮接触疲劳寿命预测方法 专利 刘怀举;贾攀;朱才朝
54 一种基于5G实时传输的电动汽车驱动试验系统 专利 吴维;刘坤;连春鹏
查看更多信息请先登录或注册

相关项目

趋势报告

经验分享